Delta®

Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom in Oil Rubbed Bronze

Model#: RP62472OB
Delta®
Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom in Oil Rubbed Bronze
Model#: RP62472OB
List Price: $65.70
Online Price: $52.56
Free Ground Shipping All Orders $49+
Documents & Specs
Installation Information
Overall Height (in.) :
5
Valve Type:
NA
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

Hello, I only need the top flange (oil rubbed colored) piece of the drain assembly. Is there a way to get only that piece and not the whole assembly?

Asked by: Jeff
Hi, Jeff. Thank you for your question. The top flange part on the Delta RP62472OB Pop Up Drain assembly is not available on it's own. If the individual part is needed, the whole RP62472OB drain assembly would need to be replaced. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

RP62472 bronze pop up assembly for Windemere faucet: I need to get a replacement pivot nut and hoping to get from local hardware store. What is size on that nut?

Asked by: BARBARA
Hi, Barbara! Thank you for your question. The pivot nut for the RP62472OB pop up drain assembly measures at 7/8"-18. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is it possible to just get the plastic replacement pop up plug - 4" long / oil rubbed bronze cap?

Asked by: Mike
Hi Mike, Thank you for your question. The lavatory drain stopper in the RP62472OB drain assembly is not available as a separate item. We do offer the RP5648RB stopper that will work with your drain although there is a slight difference between the OB and RB finishes. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

My grandson thought it would be cute to take the 4 stoppers out of the sinks, and place them behind my truck tires! I just installed the faucets in the last month. Can I purchase only the oil rubbed bronze stoppers on the 25713LF-RB faucet. Thank you.

Asked by: Mad Grandpa
Hello Mad Grandpa, Thank you for your question. The lavatory drain stopper in the RP62472OB drain assembly is not available as a separate item. We do offer the RP5648RB stopper that will work with your drain although there is a slight difference between the OB and RB finishes. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP5648RB Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a gasket or seal under the stopper flange? I have a leak between the flange and the bottom of the sink. Instructions call for a silicone bead

Asked by: scoop
Hi scoop, Thank you for your question. We do recommend to use silicone under the flange. Unfortunately, we do not provide a gasket to go between the flange and sink. Please be sure to allow the silicone to fully cure (usually 24 hrs) before running water from the faucet. However, the included gasket should seal against the under side of the sink. If the sink is rough or uneven, you may need to use a thin bead of silicone. Please not that this pop up will only work with sinks with a depth of 1 5/8 - 2 3/8". Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can you order the rod for the drain lift?

The end of it rusted off .Tried a short one and its a problem
Asked by: rusty
Hi Rusty, Thank you for your question. The lift rod that will work with the RP62472 drain assembly is the RP6146. If you need the horizontal rod then RP12517 should work. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Is there a part number for just the nut that hold the horizontal (ball) rod in?

Looking for the nut that holds the ball/rod in for the plastic pop-up assembly.
Asked by: buchanab
Hi buchanab, Thank you for your question. The nut is not available separately. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How to order longer horizontal rod,one in the box is not long enough,need one with 10 inch long,installed undermount sink ,wide spread

Asked by: Temo
Hi Temo, Thank you for your question. Unfortunately, we do not manufacture a longer horizontal rod for the RP62472 Plastic Pop-Up assembly. However, we do manufacture a Metal Pop-Up assembly and Push Pop-Up assembly. We also do have longer horizontal rod options for the metal pop-up assembly. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533 https://www.deltafaucet.com/parts-product-detail?modelNumber=72173 Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28
  • y_2026, m_6, d_14, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_101
  • loc_en_US, sid_RP62472OB, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 8ms
  • questions, product