Delta®
Adapter Kit - PEX Compression (4)
Model#: RP63263
Adapter Kit - PEX Compression (4)
Delta®
Adapter Kit - PEX Compression (4)
Model#: RP63263

Finish:Not Applicable

List Price: $27.70
Online Price: $22.64
Free Shipping on All Orders $49+
Availability: In stock
PRODUCT FEATURES
  • Compatible with Delta kitchen or bathroom faucets
  • Adapter kit for PEX compression
  • Backed by Delta Faucet’s Lifetime Limited Warranty
SUPPORT
Installation Information
Connection Type :
NA
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

I purchased a Delta 11946-SSSD-DST and would like to know what compression adapter could I use to fit Australian plumbing

Asked by: Nash
Dear Nash, Thank you for your question. The Delta Bellini Kitchen 11946-SSSD-DST faucet has 3/8" compression fittings. We would advise checking with local dealers or plumbing suppliers for any needed adapters. Best regards, Tanya
Answered by: DeltaFaucet3
Date published: 2017-04-04

I am using a current model to replace a 522-MPU-DST and need to connect the 3/8" hoses to a 1/2" faucet. Will Adapters (part #RP63263) enable me to

I am using a current model (2013 manufacture) to replace a 522-MPU-DST and need to connect the 3/8" hoses to a 1/2" faucet. Will Adapters (part #RP63263) enable me to connect to the water supply?
Asked by: Don
Thank you for your question. Delta Faucet model # RP63263 is what you use to reduce the hoses from 3/8" to 1/2" faucet.
Answered by: Delta1
Date published: 2013-10-22

Hi, Regarding #RP63262, do you sell just the 3/8" comp to 1/2" slip joint adapters by itself? What is the part number for that piece? Thank you.

Asked by: Chia
Hi, Chia! Thank you for your question. The Delta RP63262 adapters are the only supply adapters that we make. They convert 3/8"-24 UNEF to 1/2"-20 UN or 3/8"-24 UNEF to 1/2"-14 NPSM. If you have another thread size, please check for an adapter at a local plumbing or hardware store. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-03-08

RP 63263 Vs RP 63265

i am using the RP 63265 to adapt a 1/2" x 1/2" angle stop to a 3/8" faucet supply now built into the manufactured faucets. What is the difference? Which do you recommend and why?
Asked by: C-36
Hi C-36, Thanks for your question. We would recommend to use the RP63263, as it has a set of 3/8"-24 UNEF to 1/2"-20 UN and 3/8"-24 UNEF to 1/2"-14 NPSM adapters. RP63265 is a set of ten 3/8"-24 UNEF to 1/2"-14 NPSM adapters. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-07-19

Hi there - we bought the following 2 taps for installation in the UK - can you advise which adaptors we need to get: https://www.deltafaucet.com/bathroom/product/559LF-CZMPU https://www.deltafaucet.com/kitchen/product/9159-CZ-DST Thank you!

Asked by: drankin33
Hello Drankin33, Thank you for your question. Our RP63263 adapter kit should work for your needs. The 2 sets of adapters convert the 3/8" compression thread on the faucet to either 1/2" compression or 1/2" IPS thread. Best regards, Tanya
Answered by: Tanya
Date published: 2018-05-01

Will these work to connect to 1/2" CPVC supply pipe?

Asked by: Scott
Hi Scott, Thank you for your inquiry! The Delta Adapter Kit RP63263 converts 3/8"-24 UNEF to 1/2"-20 UN or 3/8"-24 UNEF to 1/2"-14 NPSM. If you have another thread size, please check for an adapter at a local plumbing or hardware store. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2020-02-27

Australian 1/2” Adapter for 9113T-BL-DST

Hi guys. Do you stock an adapter for the 9113T-BL-DST that will adapt it to a 1/2” Australian Male Stop Tap?
Asked by: Bammoman
Bammoman, Thank you for your question. These are the only supply adapters that we make. They convert 3/8"-24 UNEF to 1/2"-20 UN or 3/8"-24 UNEF to 1/2"-14 NPSM. If you have another thread size, please check for an adapter at a local plumbing or hardware store. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-11-30

Where can I get an adaptor for a Addison H20 kitchen faucet to connect my water filter like I did to old standard faucet?

Asked by: Hope
Hi Hope, Thank you for your question. This adapter kit will convert the 3/8" fittings to 1/2". If this is not the correct size for your filter, you can try to find the proper adapter locally or online. Please check with the manufacturer of the filter for the exact thread size. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-05-30
  • y_2021, m_2, d_26, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_RP63263, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 31ms
  • questions, product