Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
Documents & Specs
Installation Information
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
3/8
Valve Type:
NA
REVIEWS
bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
CLOUD, getReviews, 6ms
reviews, product
bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A
Can you please provide installation instructions???
Asked by: Barry
Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! I have included a link below that shows how to change out our wand assemblies. Please reach out with further questions. Best Regards, Kayla
https://support.deltafaucet.com/s/article/How-to-Replace-or-Upgrade-a-Delta-Kitchen-Faucet-Pull-Down-Spray-Wand-1628025862637
Answered by: Customer Service
Date published: 2024-03-28
Can the nozzle only be purchased for a 9159 CZ DST? Or do I need to purchase the entire pull down assembly - RP64069?
Asked by: Paul
Hi Paul,
Thank you for your question about the Delta Faucet RP64069CZ.
Unfortunately, we don't carry a replacement aerator for the faucet model 9159 CZ DST, the spray assembly may need to be replaced.
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31
Will this fit the delta Trask kitchen faucet. #19933
Asked by: Ted88
Hi Ted88,
Thanks so much for contacting Delta Faucet Company!
Yes, the TRINSIC® Spray Assembly MODEL#: RP64069 can be used with the TRASK™
Single Handle Pull-Down Kitchen Faucet MODEL#: 19933.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-19
Hello,
I have a Trinsic DPD-K-9159-LS and have the same problem as Laurie above. The button on the spray head is hard to toggle. Is this serviceable?
Asked by: HE36
Spray head (Spray assembly Model # RP64069) leaks when set to full flow. no leakage with spray setting. Can I replace the spray head without replacing the full hose? Can I purchase the spray head only?
Asked by: Wet faucet owner
Hi Wet faucet owner,
Thanks so much for contacting Delta Faucet Company!
The TRINSIC® Spray Assembly MODEL#: RP64069 is not available without the hose. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-30
Hi, as Laurie mentioned below, my button is also getting stuck and I would like to replace it. Moreover, the magnet on the main faucet got rusty so I replaced it (rp80977) but the sprayer still does not click back. Was there a magnet on the sprayer?
Asked by: Kari
Hi Kari,
Thank you for your question about the Delta Faucet RP64069 replacement pull-down sprayer.
For a stuck button, I recommend soaking the sprayer in 50/50 white vinegar and water. This can help remove mineral deposits that have built up and may be causing the issue. If the button is still stuck, the sprayer would need to be replaced.
The sprayer does have a magnet, but any rust would typically be caused by an issue with the magnet inside the spout. If the coating is defective or damaged, the spout magnet will begin to rust.
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Answered by: Delta
Date published: 2025-03-03
"I’d like to know if it’s possible to purchase just the head of part RP64069 – only the sprayer. Where can I get it?"
Asked by: Silvio
Hello Customer!
Thank you for your question and we are happy to help. The Delta RP64069 spray head is not available separately. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Answered by: Carrie
Date published: 2025-10-24
Hello! Is there a way to buy the replacement hose only for this sink? Do I need to also get the faucet head? My hose is leaking but the faucet heads works great so wondering if the hose is sold separately?
Asked by: Marina
Hi Marina,
Thanks for your question regarding RP64069CZ! No, the hose is only available with the spray assembly. You can purchase parts online or locally. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
Hi I just need the aerator for this model Trinsic
Asked by: Rockstar
Hi. I am looking for this part - RP64069 - but looking for 1.5gpm or 1.2gpm maximum flow - rather than the 1.8 that I currently have. Is this an option - or how can I change my current one to decrease the flow rate? Thanks
Asked by: Drew Heavens
Hi Drew,
Thank you for your question about the Delta Faucet RP64069.
Unfortunately, we don't carry this kitchen pull-down wand with a lower flow rate. I apologize for the inconvenience this causes.
Please reach out with any additional questions!
Best Regards,
Bryan
Answered by: Delta
Date published: 2025-09-03
Can the RP64069 spray head be taken apart and cleaned to remove debris or does have to be replaced. IF it can be taken apart are there any instructions available on how to do so?
Asked by: Chuck Foyt
Hello Chuck Foyt,
Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer.
The Delta Faucet part RP64069 Trinsic® Spray Assembly - Pull-Down In Chrome is not recommended to be taken apart. To properly clean it, we recommend soaking it in a 50/50 solution of white vinegar and water for 15-30 minutes.
Please contact us back directly via email with any further questions.
Best Regards,
Skyler
Answered by: Delta7
Date published: 2024-03-28
Does this item fall under the lifetime free replacement parts Delta provides?
Asked by: Joseph
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
Answered by: Themar
Date published: 2026-02-25
How do I tell if I have spot shield stainless or just plain stainless? I need to replace a part on the Trinsic Kitchen Faucet and I cannot tell the difference and dont have my original receipt.
Asked by: Sean
Hello Sean,
Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer.
The Delta Faucet Brilliance Stainless Steel and SpotShield Stainless finishes can be distinguished from each other because the SpotShield Stainless finish has an additional coating that resists hard water stains and fingerprints.
Please contact us back directly via email with any further questions.
Best Regards,
Skyler
Answered by: Delta7
Date published: 2024-03-28
Can I order just the spray head? Is this compatible with 19933-SD-DST
Asked by: Beth
Hi Beth thank you for your interest in the RP64069SS!
Yes, the spray assembly is compatible with the 19933-SD-DST.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
What size is the aerator on this faucet? I have lost the aerator wrench for my trinsic faucet and want to remove it for cleaning. What would be an appropriate aerator to replace the existing one?
Asked by: Joeinco
Hello!
Thank you for contacting Delta Faucet Company!
The aerator on our Trinsic wand, RP64069, is not designed to come off. The entire wand will need to be replaced if this part is defective.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Answered by: Delta
Date published: 2026-02-06
How can I take the RP64069 faucet head apart to clean out the calcium deposits?
Asked by: Don_T
Hello Don_T,
Thank you for your question, I would be happy to help you.
We recommend soaking the wand in a 50/50 mixture of water and white vinegar, for about 30-45 min.
Please contact us back for any further questions or concerns.
Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28
I have a Trinsic chrome kitchen faucet with hose/spray handle. I’m having an issue with the spray vs solid stream function. It will no longer stay on the solid stream and always goes back to spray function. Any solutions to this issue? Thank you
Asked by: Nick
Is this returnable
Asked by: Dude
Hi Dude,
Thank you for your question!
Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com as we would like to resolve this matter for you at this time.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-08-16
Is it possible to only buy the toggle button for the spray?
Asked by: Carole
Hello Carole,
Thank you for your question! I am happy to help you!
Our Delta RP64069SS does not have a replaceable button, the whole wand would need replaced.
Please contact us back for any further questions.
Best Regards,
Nicole
Answered by: Delta7
Date published: 2024-03-28
Hello- can you confirm that this replacement part for RP64069SS- spray assembly pulldown will have the same length hose as the one we received when we bought the units? The magnet is dead and there is rust build up around the area.
Asked by: Zak71
Hello Zak71!
Thank you for your question and we are happy to help! The Delta RP64069SS replacement spray head and hose will be the same length as the spray head and hose that came with the original unit. We also recommend replacing the RP80977 magnet repair kit. With any further questions or concerns, please do not hesitate to reach out to us directly.
Best Regards,
Carrie
Answered by: Delta7
Date published: 2024-03-28
Does this part include the magnet that holds the sprayer into the faucet? Also is it available in black?
Asked by: Diane
Hi Diane,
Thank you for your question about the Delta Faucet RP64069.
This spray wand does not include the spout magnet that would hold the wand against the spout. A magnet replacement kit would be RP80977.
https://www.deltafaucet.com/parts/product/RP80977.html
This spray wand is available in the matte black finish as RP64069BL.
https://www.deltafaucet.com/parts/product/RP64069BL.html
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
The faucet on my pull-down assembly drips unless the handle is turned completely off manually. Which replacement part do I need in order to remedy this problem? Thanks
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.
ATTENTION
This link will take you out of the International section and direct you to another page.