Spray Assembly - Pull-Down in Stainless
Model#:
RP64069SS
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
MagnaTite® Docking
MagnaTite® Docking
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
Documents & Specs
Installation Information
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
3/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
Todd from
Delta RP64069 Replacement Sprayer
My original sprayer was 7 years old and splattering water all around. I tried to clean it by soaking in vinegar, but that didn't resolve the problem. My new sprayer is working great - no splatters!
Date published: 2026-01-12
Rated 3 out of
5
by
MsKDC from
Great until it’s not
Our Trinsic faucet has been a delight until recently when the retractable head quit nesting with the spout. I stuck my finger in and all kinds of brown crumbly junk started coming out. Pieces of pieces. Reading this thread makes me think maybe I just leave it alone and keep my fingers out of it, but for an expensive faucet to disintegrate like this is really disappointing. Hey Delta, waiting to hear from you.
Date published: 2025-12-02
Rated 2 out of
5
by
tim63 from
Works great until is doesn't.
Another replacement aerator and hose to account for a poor design. Like others have stated, "We don't need another hose, just the integrated aerator." Replacement hoses are starting to stack up. Just sell the aerator portion at a cheaper price so we can feel less duped about our original purchase of your faucet.
Date published: 2025-11-15
Rated 1 out of
5
by
JonA from
Avoid
Only faucet I’ve seen on the market that doesn’t have a removable aerator for replacement - have to buy a whole new head and hose. A response to another review mentions that replacing the aerator can cause cross threading but if it was such a big issue they wouldn’t sell other faucets with replaceable aerators
Date published: 2025-08-29
Rated 2 out of
5
by
Atomic Blonde from
Stick with Kohler
My home is about 5 years old and this faucet has been a dissapointment (as has other Delta products). We have had problems with the pull down sprayer for about a year and a half now. I have consistently cleaned the spray area and it helped until now. The plastic fitting in the pull down head is now spraying water at the crevice where the plastic meets the metal. And the plastic hole areas are discoloring and are misshapen. I have a whole house water purifying system.
I should have stuck with Kohler.
Date published: 2025-03-28
Rated 1 out of
5
by
Dave20024 from
Poor Design
Worked perfectly for just over one year and then the flow rate dropped to almost nothing. Soaked in vinegar and the flow rate improved for about a week and then dropped again. Very poor design as the internals are not serviceable and the replacement part is very expensive and comes with a hose that is not needed.
Date published: 2025-03-04
Rated 1 out of
5
by
Russ from
Poor design
Spray nozzle clogged in less than 2 years. Poor design that it’s not cleanable and have to buy a new one.
Date published: 2025-02-02
Rated 1 out of
5
by
conn from
Expensive replacement
Ridiculous that I was unable to clean this faucet wand because the aerator is not removable. I submerged it in white vinegar just for the vinegar to get trapped in the wand along with the build up. I had a well pump replacement which ended up clogging several faucet aerators. Most were simple fixes but Delta of course makes me spend $75 for a replacement part with hose that I don’t need!
Date published: 2024-12-23
Q&A
Does this come in the black matte finish, not chrome?
Thank you for your question, Susie! The part number RP64069 is in Chrome. This part number followed by a suffix will designate the finish needed, for example, RP64069BL would be the spray assembly in the Matte Black finish.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64069BL
Best regards, Edward
Date published: 2024-07-23
Can the spray head be disassembled for cleaning?
Hi Bobby,
Thank you for your inquiry! A Delta Pull-Down Wand/Sprayer Assembly RP64069 is not designed to be taken apart, and doing so will damage the internal mechanism while voiding the warranty. It can be unscrewed counterclockwise from the hose connection and be cleaned. We recommend soaking it in a solution of 50% white vinegar and 50% water for an hour or even overnight to clean. Please feel free to call, email, or message us on social if there is anything else you need.
Best regards,
Tanya
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-07-23
can the trask sprayhead be dissassembled to clean out sand?
Thank you for your question, Daniel! A Delta sprayer assembly wand is not designed to be taken apart as doing so will damage the internal mechanism while voiding the warranty. You can try pouring a 50/50 mixture of white vinegar and water directly into the wand as well as using the Touch-Clean spray holes however if that does not help, please contact the warranty department directly for further assistance.
Best regards, Edward
Date published: 2024-07-23
How can I determine if my 19933T-SD-DST faucet is Stainless or Spotless Stainless?
Hello,
Thank you for your question!
On the hot supply line under the sink will be a tag with the model number on it. If your model number includes an "SP" then it features the SpotShield technology. Standard stainless steel finishes have the "SS" designation.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-04-28
Is there a built-in filter? I have build up and didn't know if/how to take apart just the sprayer assembly. I don't think I need the whole line but want to make sure there is no build up in the sprayer assembly. Thanks!
Thank you for your question, Mike! The wand can be unscrewed from the hose and you will find a debris screen on the back of this wand. Simply rinsing this filter will clean out any buildup. We would also recommend pointing the hose into the sink and turning the water on to a full mixed position to flush out any further deposits. Please feel free to contact us directly if you need further assistance.
Best regards, Edward
Date published: 2024-07-23
the hose assembly is different than original how do i connect it
Hi Janice,
Thank you for your question. The new hose should thread directly into the wand. There may be an adapter. To remove it, press the round tab and unscrew.
Best regards,
Jon
Date published: 2024-03-28
How do you unclog sprayer Assembly RP64069 on 9159T-DST model Kitchen sink faucet
Hi Kishor,
Thank you for your question. To dissolve any sediment that may collect in the aerator or spray face, just soak the face of the spray assembly in a 50/50 or stronger mixture of white vinegar and tap water for 10 to 15 minutes.
The large particles of debris are caught in the bottom end of the spray assembly, where it connects to the hose. Just unscrew the spray assembly from the hose assembly and flush the debris out with water from the hose.
Best regards,
Tanya
Date published: 2024-07-23
O Ring
The o ring broke apart, so now the sprayer shoots water up. What size is the o ring in side the trinsic sprayer so I may replace?
Thank you.
Should be covered by warranty.
Date published: 2024-03-28
Can I replace this part myself ?
Hi, Finolobo!
Thank you for your question. The Delta RP64069SP Sprayer and Hose Assembly can be installed by you, the home owner. To replace, make sure the handle is in the off position. Remove the hose clip that secures the connection to the valve end under the sink. Pull the hose connection up and out from the top of the sink. The new hose connection can then be snaked back into the faucet and secured with the hose clip. Please feel free to call, email, or message us on social.
Best regards, Rosanna
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-07-23
What is the size of the hose assmbly that attaches to this sprayer, and is there an adapter to 3/4" hose available?
I have this sprayer on my kitchen sink faucet (DPD-K-9159-DST.) I would like to be able to connect a bottle washer that uses a female 3/4" garden hose connector. There's no direct access on the sprayer itself for a thread adapter. Is there anything available to convert the hose assembly to 3/4" garden hose?
Hi CritZero,
Thank you for your question. The hose has a thread size of .625-18. We do not make an adapter for the hose.
Best regards,
Jon
Date published: 2017-04-06
Hi, the button that switches between the spray function and regular stream is getting stuck. Can I fix that or do I need to replace this? Is this the correct replacement piece for the 9159-CZ-DST Trinsic Pull Down Sprayer Kitchen Sink Faucet, SingleHandle
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-02-12
Can the sprayer for Delta RP64069AR be taken apart and cleaned?
Hi, Larry!
Thank you for your question. The Delta RP64069AR sprayer assembly can be unscrewed counterclockwise from the hose connection to remove and be cleaned. We recommend to soak in a solution of 50% white vinegar and 50% water for an hour or even overnight to clean.
Best Regards,
Rosanna
Date published: 2024-07-23
How do I disassemble sprayer after removing it from the hose?
I have cleaned all accessible areas and soaked the sprayer overnight in vinegar, but the flow is still very low. The spray function works well, but the regular flow function is weak. Something must be clogged within the sprayer part. Is there a way to disassemble it and clean it?
I have replaced this RP64069AR assembly three times in three years. I finally figured I had enough pieces to take it all apart and see what the problem with the push valve was. I can tell you that there are 4 small rubber O rings in this tiny push valve. When they get worn out over time from switching from spray to solid flow, the valve fails or sticks. It's rubber on plastic and it doesn't take much due to the valves tiny size. My advice, avoid switching from spray to solid flow too often. Keeping it in one position as much as possible will lengthen the life of this faucet head.
Date published: 2024-03-28
Is this the correct replacement for model number 19802TZ-CZ-DST? It appears that the magnet on both the spray assembly and the faucet neck have rusted and deteriorated. Is there a replacement just for the magnets?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-09-17
Can the debris screen be replaced and if so how? Is there a model number for the screen? The screen in our unit completely fell apart and was thrown away before I could get specifics.
Thank you for your question. Larry! The screen/aerator of the Delta Wand Assembly RP64069 is not a removable part, the full wand assembly would need to be replaced. Please feel free to call, email, or message us on social, if there is anything else you need.
Best regards,
Tanya
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-07-23
how do I take this assembly "RP64069" apart for cleaning
Hello Bror,
Thank you for your question! We will be happy to help you today!
The Delta Pull-Down Wand/Sprayer Assembly RP64069 is not designed to be taken apart, and doing so will damage the internal mechanism while voiding the warranty. It can be unscrewed counterclockwise from the hose connection and be cleaned. We recommend soaking it in a solution of 50% white vinegar and 50% water for an hour or even overnight to clean.
Please contact us back for any further questions.
Best Regards,
Renna
Date published: 2024-03-28
We have the model 19933T-SD-DST Delta Touch2O faucet and the little plastic screen in the end of the spray head has disintegrated. Very messy now to turn on water. Can this little screen be replaced or do I have to buy the whole thing (RP 64069SS)?
Hi David,
Thank you for your question about the Delta Faucet RP64069SS Trask™ Spray Assembly - Pull-Down In Stainless. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
We recommend soaking the spray head in 50/50 white vinegar and water, then rinsing. Repeat as necessary. This spray head is not designed with a removable aerator. We recommend replacing the spray head if the issue remains.
Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Is there a visual difference between spotsheild stainless and stainless finishes?
Hi Dennis,
Thanks so much for contacting Delta Faucet Company!
The Delta SpotShield Technology helps to keep your faucet or shower cleaner, longer by resisting water spots and fingerprints. With the addition of antimicrobial protection of the finish, Spotshield Finishes also help to reduce stain and odor causing microbial growth on the faucet finish. Products with a Spotshield Stainless finish model number will end with -SP.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-28
How can I find the type of finish on my faucet, not sure if stainless, southerly stainless, or attic stainless?
Hi Dennis,
Thanks for your question regarding RP64069SS! I have included a link from our Help Center below to better assist you. Please feel free to contact us with any questions or for further assistance.
https://support.deltafaucet.com/s/article/What-are-the-various-finishes-that-are-available-for-Delta-products-1628028365363
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
Does this fit the 19933 sssd dst delta faucet. My faucet was manufactured in 2014 and shows as discontinued. Thanks You
Hello Rich,
Thanks so much for contacting Delta Faucet Company!
Yes, the Trask™ Pull-Down Kitchen Faucet with Soap Dispenser Model#: 19933-SPSD-DST uses the Trinsic® Spray Assembly Model#: RP64069. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2025-02-03
Can I order just the spray head? Is this compatible with 19933-SD-DST
Hi Beth thank you for your interest in the RP64069SS!
Yes, the spray assembly is compatible with the 19933-SD-DST.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Date published: 2024-03-28
Is it possible to only buy the toggle button for the spray?
Hello Carole,
Thank you for your question! I am happy to help you!
Our Delta RP64069SS does not have a replaceable button, the whole wand would need replaced.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Do you have a video on how to replace this part?
Hi Rick,
Thank you for your question about the Delta Faucet RP64069SP.
A video of replacing the spray wand is available here. Unfortunately, we don't have a video of replacing the sprayer hose.
https://www.youtube.com/watch?v=jJAZ8r2vdOA
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-02-09
Where can I find installation instructions for a replacement wand assembly part number RP64069CZ?
Hi Valued Customer,
Thank you for your question!
Please refer to the Maintenance and installation in the link below.
https://media.deltafaucet.com/MandI/114376%20Rev%20B.pdf
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-06-24
My faucet is 8 yrs old and I'm told by Ferguson's (where it was purchased) that it is the 'old' version of Delta faucet 9159 Trinsic pull down kitchen faucet. The only part I need is the sprayer itself, not the entire assembly including the hose.
Hello!
Thank you for contacting Delta Faucet Company!
The sprayer, RP64069, automatically includes the hose.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2026-02-06
I have a 19933-sssd-dst. Can you tell me if it is artic stainless or black stainless.
Hi Ron 55,
Thanks so much for contacting Delta Faucet Company!
Model 19933-SSSD-DST will feature the traditional stainless steel finish. The "AR" designation in the model number will be Arctic Stainless and the "KS" will be black stainless.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
I just ordered this. I’m assuming the hose comes with it as well.
Hi Valued Customer,
Thank you for your question.
The hose is included.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
Date published: 2025-12-02
Is just the spray nozzle sold separately?
Hello Spray nozzle head,
Thank you for your question! I am happy to assist you!
The Delta RP64069 is not available without the hose assembly.
Please contact us back with any further questions.
Best Regards,
Skyler
Date published: 2024-03-28
Is aerator in Delta Faucet RP64069 Trinsic Sprayer, Chrome, 6.500"L x 3.000"W x 2.500"H removable?
Our faucet was purchased 4 yrs ago thought it was brushed my nickel - what finished would be comparable
Hi Fsusan, thank you for your interest in the RP64069KS!
Artic Stainless, Stainless, and spot shield stainless would be considered comparable. Please contact us
directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.