Image Thumbnail, click to view zoomed product image
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Length :
1/2
Overall Height (in.) :
1/2
Valve Type:
NA
REVIEWS
Rated 3 out of
5
by
Gage from
cover plate
This plate get very water spotted and doesn't wipe clean easily. resulting in looking bad most of the time. I would prefer a surface that is water friendly.
Date published: 2013-05-16
Q&A
can this part be used with Haywood™ Single Handle Centerset Lavatory
I have an sink with 8 inch holes but only want a single handle lavatory faucet.
Hi Bathreno, Thank you for your question!
The RP64070 escutcheon will not fit on the 15999-DST Haywood lavatory faucet.
Best regards,
Brandis
Date published: 2024-03-28
Is this the right part and what comes with it.
We purchased a faucet, model 9159-dst. We have three holes in the sink, and need the parts to adjust it to one hole. The instructions say we need 10 1/2" RP64070 Escutcheon, Mounting screws, gasket, nuts and washers. Is this the right part? And does it come with the other pieces, or are they separate? Thanks.
Thank you for your question. When you order Delta Faucet model # RP64070, it will include everything you need to mount your faucet using 3 holes instead of 1 hole.
Date published: 2024-03-28
How much clearance to backsplash is required? Images look like it will work with less than an inch.
Thank you for your question, Jack. We recommend having a 2 1/2" clearance from the center of the mounting hole to the backsplash. That will provide enough room for installation, use, and cleaning.
Best regards,
Jon
Date published: 2024-03-28
Our current faucet is a 2- hole (pillar and separate handle). Will this part work for installation of a single pillar with attached handle faucet?
Hello,
Thank you for your question!
Unfortunately the Pilar can not utilize an escutcheon like this. We apologize for any inconvenience this may have caused.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-02-17
Will this work for a 4 hole drop in stainless steel sink?
will it work to cover at least 3 holes of a 4 hole drop in?
Hi Veronica,
Thank you for your question. RP64070 will cover up 3 holes in a normal installation.
Thanks,
Dave
Date published: 2024-03-28
The diagram for the Delta #4159-DST describes part #RP64070 as a 10.5 inch escutchen but elsewhere it is described as an 8 inch escutcheon. Which?
I am replacing a 10 inch centerset faucet and I need the escutcheon for this faucet to cover it. Will it work?
That actual dimensions of the plate are 10.5 inch. Hole to Hole is 8 inches. So yes, this is the one you need.
Date published: 2024-03-28
Replacing wet bar faucet with Delta 9159-DST in champagne bronze, BUT I need an escutcheon with 4" width (hole center to hole center) Do you have one
Hi Michael, Thank you for your question!
We only carry an optional 10 1/2" escutcheon RP64070 for the model 9159-DST.
Best regards,
Brandis
Date published: 2024-03-28
I bought the Delta Trinsic Single Lavatory Faucet. I need an 8-inch plate to cover the two other faucet holes in the sink. Which is the correct Delta product to purchase? Thanks.
Hello Emm Dee,
Thank you for your question. Unfortunately, we do not manufacture an 8" escutcheon plate for our Trinsic Lavatory faucets. The optional escutcheon plate for the lavatory model is 6" only.
Best regards,
Tanya
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.