Trinsic®
Escutcheon & Gasket - 8" in Arctic Stainless
Model#:
RP64070AR
Image Thumbnail, click to view zoomed product image
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
null
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Length :
1/2
Overall Height (in.) :
1/2
Valve Type:
NA
REVIEWS
Q&A
How do you measure the hole-to-hole 8"?
Right now the old faucet is still in place on my sink. 3 holes: if I measure from what appears to be the middle of the left hole, to the middle of the right hole, it's 8 inches. Is that rights? So this 10+" plate should cover all 3?
Hi Bill, Thank you for your question!
Your measurement is correct. You measure for center to center. So a 10" escutcheon plate should work.
Best regards,
Brandis
Date published: 2024-03-28
what is width and length?
Hi Rod,
Thank you for your question! The plate is 10 1/2" wide and 2 1/2" front to back.
Best regards,
Jon
Date published: 2023-08-08
Replacing wet bar faucet with Delta 9159-DST in champagne bronze, BUT I need an escutcheon with 4" width (hole center to hole center) Do you have one
Hi Michael, Thank you for your question!
We only carry an optional 10 1/2" escutcheon RP64070 for the model 9159-DST.
Best regards,
Brandis
Date published: 2024-03-28
I bought the Delta Trinsic Single Lavatory Faucet. I need an 8-inch plate to cover the two other faucet holes in the sink. Which is the correct Delta product to purchase? Thanks.
Hello Emm Dee,
Thank you for your question. Unfortunately, we do not manufacture an 8" escutcheon plate for our Trinsic Lavatory faucets. The optional escutcheon plate for the lavatory model is 6" only.
Best regards,
Tanya
Date published: 2024-03-28
can this part be used with Haywood™ Single Handle Centerset Lavatory
I have an sink with 8 inch holes but only want a single handle lavatory faucet.
Hi Bathreno, Thank you for your question!
The RP64070 escutcheon will not fit on the 15999-DST Haywood lavatory faucet.
Best regards,
Brandis
Date published: 2024-03-28
Is this the right part and what comes with it.
We purchased a faucet, model 9159-dst. We have three holes in the sink, and need the parts to adjust it to one hole. The instructions say we need 10 1/2" RP64070 Escutcheon, Mounting screws, gasket, nuts and washers. Is this the right part? And does it come with the other pieces, or are they separate? Thanks.
Thank you for your question. When you order Delta Faucet model # RP64070, it will include everything you need to mount your faucet using 3 holes instead of 1 hole.
Date published: 2024-03-28
Where is the 10-1/2 inch all i see are 8 inch rp64070 is suppose to be 10-1/2 inch
Thank you for your question, Brian! The Delta Trinsic Escutcheon and Gasket RP64070CZ is a 10 1/2” plate that is available for ordering. However, the plate does install on 8" center to center holes.
Best regards,
Tanya
Date published: 2024-03-28
How much clearance to backsplash is required? Images look like it will work with less than an inch.
Thank you for your question, Jack. We recommend having a 2 1/2" clearance from the center of the mounting hole to the backsplash. That will provide enough room for installation, use, and cleaning.
Best regards,
Jon
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.