Delta®
Bath Waste Assembly in Venetian Bronze
Model#:
RP693RB
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Complete the customized look of your bath with this Classic Bathwaste Assembly. You can count on Delta reliability throughout the home, including our accessories and repair parts.
- Toe-operated drain mechanism for tub fill
- 13-15 1/2" vertical adjustment
- 6-7 1/4" horizontal adjustment
- Solid brass construction ensures quality and reliability
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
15-1/2
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
Katie29 from
Looks great!
This part works great, simple to install, and makes my bathroom look more updated.
Date published: 2018-03-03
Rated 5 out of
5
by
Jimmy Q from
Great Product
Just what I was looking for! Looks great in my new tub!
Date published: 2015-07-13
Rated 4 out of
5
by
hotrod from
Nice quality with issues
The overall quality of the product is great but I have a few issues with it. The first issue is the beveled gasket is so thick that it cannot be tightened down on my tub to seal it. Between the surface of my tub and the overflow fitting is perfectly parallel and doesn't require a beveled gasket. I need a flat gasket or at least a beveled one that is one third as thick as the one provided in the kit. The second and most import issue is the overflow pipe is too short. The website shows a maximum of 13 1/2 inch max vertical adjustment. The website should explain the measurement can't be more than that from the drain to the top of the overflow hole. My new tub is not deep but it needs to be about two inches longer. The old original brass drain from the old steel tub is 14 1/2 inches long and the new delta is only 12 inches. It seems that for a kit costing over $100 dollars that there would be two overflow gaskets and a overflow tube that is a couple inches longer and could be cut to fit.
Date published: 2015-02-01
Q&A
Is this a 1 1/2" or 1 1/4" drain?
Hi Vaughan,
Thank you for your question. This drain requires a 1 5/8" minimum drain hole. The flange is 1 1/2".
Technical Specifications:
https://media.deltafaucet.com/SpecSheet/DSP-B-RP293_Rev_B.pdf
Best regards,
Jon
Date published: 2016-08-29
Is the actual drain pipe 1 1/4" or 1 1/2"? i.e. what size is the tail piece that goes into the trap?
Hi Vaughan,
Thank you for your question! The tail piece is 1 1/2".
Best regards,
Jon
Date published: 2021-03-24
Trim only
I'm replacing the trim only. I don't need the entire waste assembly. Can I purchase just a trim set? If so, part number please.
Hi Iherring, Thank you for your question!
The RP693 does not come as a trim only. However, you can order only the parts needed. Below is the parts diagram.
http://www.deltafaucet.com/customersupport/documentation/rp693rb.html?document=pd&fromDetailArea=bath&documentIndex=0#flashWrapper
Best regards, Brandis
Date published: 2024-03-28
Is there an extender part or any way to make this taller? It doesn’t fit any but the shallowest tubs.
Thank you for your question, Daniyeg. We do not currently make an extension or longer bath waste assembly. Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-B-RP293_Rev_B.pdf
Best regards, Jon
Date published: 2024-03-28
Will it fit KOHLER Villager Bath?
Thank you for your question. Delta Faucet model # RP693SS has a maximum vertical adjustment of 13 1/2" and a maximum horizontal adjustment of 7 1/2." You will need to check with Kohler to see if this will meet the specifications.
Date published: 2024-03-28
Is the RP693SS 1 1/4" or 1 1/2'? Do you make one that is for 1 1/4"? Thanks. Steve
Hi, Steve!
Thank you for your question. Here is a link to the technical specifications sheet for the Delta RP693SS bath waste assembly:
https://media.deltafaucet.com/SpecSheet/DSP-B-RP293_Rev_B.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
When will this be available?
I've noticed that the shipping date had been pushed back twice and I'm in the middle of a remodel and need this assembly asap. Thank you very much.
Thank you for your question. We do apologize that you have been waiting for your part for so long. We have been having some supplier issues for this model and are waiting on components in order to manufacture the part. Unfortunately there is nothing I can send you in the mean time to get you through until the real peice comes in. Hopefully we will get the peices in soon.
Date published: 2024-03-28
Is this the same color for Delta T14438-CZ champagne bronze?
Thank you for your question, lisaaa! The Delta suffix "CZ" does indicate the Champagne Bronze finish.
Best regards, Edward
Date published: 2024-03-28
PART LIST
PART LIST
View Product
![Image-Master-RP293]()
Delta®
Delta® Bath Waste Assembly
List Price:
$253.80
Online Price:
$203.04
Free Ground Shipping All Orders $49+
RP293
View Product
![Image-RP7420]()
Delta®
Delta® Beveled Gasket - Overflow Plate
List Price:
$17.60
Online Price:
$14.08
Free Ground Shipping All Orders $49+
RP7420
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.