Delta®
Spray Assembly - Pull-Down in Chrome
Model#:
RP81912
Image Thumbnail, click to view zoomed product image
Documents & Specs
Installation Information
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
4
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
Jeff from
Junk
Clogged with no easy way to clean it after just a few years.
WAY overproced.
Date published: 2026-01-28
Rated 2 out of
5
by
Curious from
Aerator Removal
I like the product but I did need to disassemble the head because my water softener blew media throughout my plumbing. I damaged the aerator and purchased a new head before I figured out how to disassemble the head. The trick is to pry the spray switch out with a small flat head screw driver and then remove one phillips screw. After this the interior assembly will slide out the casing and the lower portion can be unscrewed to access the aerator. However, I can't find a part number for the aerator. Nicole (Digital Communication Specialist) stated that this part was not intended to be serviced. However her stated reason is bogus as you would have to be careless to cross thread the threads I encountered. I like the design of the product and the product itself but I am very disappointed by the lack of a parts diagram, the lack of a part number for the aerator, and the maddening response by Nicole. Product rates a 4, customer support -2, hence my rating of 2.
Date published: 2025-09-24
Rated 2 out of
5
by
WaterDrinker from
I agree with the earlier review regarding failure
I came to the site looking for a replacement screen (the little guy inside the head) and saw the review complaining about the head not returning to normal flow after using the spray function. It hasn't done that in years (if ever). I just assumed that was the intended design. But it really is a pretty faucet. Kudos to the form engineer. Function engineer should give it another go. BTW, it would be nice for Delta to sell that little screen individually for those that try to clean it and then watch it go down the drain...
Date published: 2022-08-30
Rated 2 out of
5
by
Brad from
spray is too restricted
We bought this Delta faucet 18 months ago, looks nice but the nozzle is so restricted that it sprays water in narrow jets that splatter everywhere, and we have a deep sink too. You cannot control or adjust these jets of water. It is very difficult to turn on the faucet only half way to lower the pressure, and if not open far enough the spray function does not work at all. The second issue is that once set to spray it does not go back to the normal flow setting after the water is turned off, you must manually reset the faucet to normal flow. Good quality but bad design.
Date published: 2018-06-04
Q&A
Can I remove and clean the aerator on this spray head? I purchased this same spray head but it did not come with a small screen at the point of attachment to the black faucet hose. Should that screen come with the spray head? Thank you!
Hi GTadmirer,
Thank you for your question about the Delta Faucet RP81912KS.
The aerator is not designed to be removable. Not all models will have a screen at the back of the sprayer.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-01-31
does this spray head have a stronger spray than the spray shield head?
Hi Karen232,
Thanks for your question regarding RP81912AR! Yes, the ShieldSpray model (RP90842AR) has a maximum flow rate aerator of 1.8 GPM at 60 PSI. Compared to the standard model (RP81912AR) that has a maximum flow rate aerator of 1.5 GPM at 60 PSI.
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Date published: 2023-10-04
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.