Wand Assembly-ShieldSpray in Chrome

Model#: RP90840
Wand Assembly-ShieldSpray in Chrome
Model#: RP90840
List Price: $82.70
Online Price: $66.16
Free Ground Shipping All Orders $49+
PRODUCT FEATURES
Technology and Special Features
ShieldSpray®
Documents & Specs
Installation Information
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
4.5
Valve Type:
NA
REVIEWS
Rated 1 out of 5 by from Clogs Clogs, clogs, clogs. Terrible head
Date published: 2025-11-25
Rated 2 out of 5 by from Continually clogged head Head gets clogged so very poor pressure. Thought I had a bigger water pressure issue at the house but the plumber diagnosed it was just this head. I use vinegar soak and it gets clogged again in a few weeks. I don’t even live in an area with hard water. Super disappointed in this product. Is there a different head that can be used?
Date published: 2025-09-28
Rated 1 out of 5 by from Clogs constantly causing poor water pressure We’ve had this for not even 6 months and it is awful. This spay rig clogs constantly. I use a brush to clean the filter, but that only helps for maybe a day. I don’t have the box nor my receipt any more to return it. Is there a better faucet head that we can replace this with? So frustrating.
Date published: 2025-03-22
Rated 4 out of 5 by from Nice look, works well, and is easy to use. There are 2 different filters that are internal. The aerator filter is easy enough to find, but the one that connects to the water supply is impossible to find. I'm in an area that has the worst water in the state. I've pulled them out and used wire brushes, toothpicks, acids, and pretty much everything else I could think of. After 30 min of wire brushing, I was able to get full flow back. Head replacement is half the price of the entire unit so if you have hard water, I wouldn't suggest it unless you are ready to do this. Once every 3 years isn't terrible I guess.
Date published: 2024-12-14
Rated 1 out of 5 by from Clogs like everyone else says Mine kept clogging, even after attempting to clean. And as I read the reviews of others it confirmed it’s not just me experiencing this. You would think Delta would do something about it if there is a consensus amongst everyone with this problem. And to make matters worse the replacement cost is offensively high for how crappy of a product it is. It’s PLASTIC, there is no justification for it to be $90, what a slap to the face, especially since it’s just going to clog again eventually… Save yourself the frustration and money and simply buy a replacement off of Amazon for $20 since it’s going to be the same plastic quality anyways without the clogging.
Date published: 2024-10-13
Rated 1 out of 5 by from Not a good produce I purchased this faucet and it has always had low water pressure. It has gotten so bad I needto take the faucet head off to fill my canning pot the water runs so slow through this faucet head. Very discouraging. We have cleaned vigar and a brush and the faucet still will not allow a free flow of water.
Date published: 2024-09-20
Rated 5 out of 5 by from Very good 3 years without problems. First time with vinegar and brushing the mesh and pressure is back. Stop complaining and do the right thing.Check your water system and pipes. Very helpful. Handyman skills too. Thanks,
Date published: 2024-09-09
Rated 1 out of 5 by from Very Very Poor Design We've had nothing but problems with this faucet. Replaced the faucet head but that only lasted a short time. The water just trickles out and have tried cleaning it numerous times but it's still not satisfactory. Do you have replacement filters at a reasonable price? If not then what type of warranty does this faucet have? I've read numerous reviews regarding this same problem.
Date published: 2024-06-09
  • y_2026, m_10, d_10, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_US, sid_RP90840, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

can this be used as a replacement for RP51480AR

Asked by: Rapid79
Hi Rapid79, Thanks so much for contacting Delta Faucet Company about RP90840AR! All of our wands assemblies are model specific, they will connect to the house but not sit properly and flush in the spout body. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

I have model 9159TV-BL-DST can I upgrade the sprayer to Shield Spray? I’m a wheelchair user with weak hands and can not pull mine down but the Shield Spray has that bell shape and I’ve tried it and have no issues

Asked by: Rob Zimny
Hi Rob, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta TRINSIC® VoiceIQ™ Single-Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Matte Black MODEL#: 9159TV-BL-DST unfortunately, does not include ShieldSpray Technology. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My faucet head has no pressure and it is difficult to use.  It has a lifetime warranty so I would like a replacement hose and head. Can you get that started. 

Asked by: Kool
Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP90840AR. We have reached out to you directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-05-09

Is there any other faucet head that we can use instead of this one? It seems many others have our same problem .

Asked by: Jennifer

We have a newer stainless Delta kitchen faucet but the spray nozzle no longer works correctly.  I think the faucet is a model 19810-SS-DST-R.  Will this spray head work?  It looks a little different than the nozzle we have.  thanks.  

Asked by: Paul
Hi Paul! Thank you for your question and we are happy to help. The Delta RP9040AR will not work. The RP101633SS would work with the 19810-SS-DST-R. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-04-29

Will this noozle work on a 9192t-dst touch faucet

Asked by: Linvel
Hi Valued Customer, Thank you for contacting Delta Faucet Company! The wand assembly for our 9192T-DST faucet is RP60976 for normal spray and stream or RP90838 for the ShieldSpray wand. The wand assemblies are model-specific and are not interchangeable. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-05-22

Is this compatible with the Dylan Model# #HD67496-1008D2 as a replacement

Asked by: MackDari
Hi MackDari, Thanks so much for contacting Delta Faucet Company regarding RP90840AR! This wand is only compatible with the following Delta Faucet models: 9181-AR-DST, 9981-AR-DST, 9981T-AR-DST, and 9181T-AR-DST. Please contact us directly if you have any questions or need additional assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Will this head work on 9178-DST

Asked by: Mpc6
Hello! No, model 9178-DST uses the RP51480 pull-down wand. https://www.deltafaucet.com/parts/product/RP51480.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-08

The head on our unit is A112-18-1. Is this the correct replacement?

Asked by: JRBerryhill

I have a magnetic Pull down spout. Is the Spray head Magnetic Docking ?

Asked by: Arvol 44
Hi Arvol 44, Thank you for your question! Yes, it docks with the spout which uses a magnet. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-04-01

Is there a shieldspray wand compatible with the Essa and its related kitchen faucets?

Asked by: Alan
Hi Alan, Thank you for your question. Unfortunately, there is not a sheildspray wand available for the Delta 9113-DST at this time. Best regards, Simone
Answered by: Simone
Date published: 2024-03-28

I am looking for a replacement head for my Delta Lenta Touch Kitchen Faucet in Spotshield Stainless? Can you let me know how to order that with part number. 

Asked by: Peter
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-09-16

Need to replace head only on a Delta Dunsley kitchen faucets. Model # 19756Z-BLSD-DST. Which head on your head would I need to purchases ?

Asked by: MP101
Hi MP101, Thanks so much for contacting Delta Faucet Company about, RP90840BL! The correct head assembly is RP93507BL, I have included a link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-K-19756Z-SD-DST.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-05-03

I have this facet ,can another head be put on it instead of this head.

Asked by: Josie 42
Hi Josie 42, Thank you for your question about the Delta Faucet RP90840AR. Another pull-down sprayer from a DST kitchen faucet would likely fit. Most have a similar hose connection and dock to the same spout magnet. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-19

We are experiencing a low flow rate from our faucet (9981-DST). It was installed by the builder of our new home in May 2019. It's the only faucet in our home with this problem. I've tried all the cleaning techniques and still no go. Could it be the head?

Asked by: Chuck
Hello Chuck, Thank you for contacting us, I would be happy to help you. Low flow on our Delta faucets are normally caused by a blockage or debris. We recommend flushing, please see the step by step instructions below. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Please contact us back if you have any questions or need further assistance. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Will this sprayhead fit a 19915-sbsd-dst Satori faucet?

Asked by: PK54
Hi Patrick, thank you for your interest in the RP90840RB! This spray assembly works for the Delta 9181T-AR-DST faucet. The Satori wand is obsolete. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Will this head fit my Home Depot Charmaine Delta unit and what finish matches SS.

Asked by: TomH
Dear TomH, Thank you for your question! I will be more than happy to help you! Delta part number RP90840 fits with Delta model 9181-DST. The Delta Charmaine wand assembly is RP93631. https://media.deltafaucet.com/PartsDiagram/DPD-K-19962Z-SD-DST.pdf Feel free to contact us directly, if you need further assistance. Best regards, Kyra
Answered by: Delta7
Date published: 2024-03-28

Can I replace my ESSA RP80524AR with an Esque RP83819AR?

Asked by: TomY
Thank you for your question! Unfortunately we cannot recommend using a different sprayer as they may not align properly with the spout of your current faucet. If you have any further questions or comments please feel free to contact us directly. Best Regards, Aaron
Answered by: Customer Solutions
Date published: 2024-03-28

Will this fit a DELTA MODEL 19939-DST Spray RP73053 ?

Asked by: Ray Hubbert
Hi Ray Hubbert, Thanks so much for contacting Delta Faucet Company! Model 19939-DST can only use the RP73053 wand assembly. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have a Sadie RP93509 that needs a replacement Wand will this fit and if not what will?

Asked by: Climberchrise1
Hi Climberchrise1, thanks for your question regarding RP90840AR! RP93509SP is the correct wand replacement and is available for ordering. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Delta Management Department After reading poor reviews on this nozzle replacement, I am concerned because I am experiencing the same problem with my existing nozzle . Have you resolved this problem before I buy a replacement? Thank you, 3/19/24

Asked by: Rosebud
Hi Rosebud, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-20

Will this spray head fit the Delta Mateo model# 9183-BL-DST-R

Asked by: Angie64
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The spray assembly is for Esque faucet. The correct spray assemblies are RP81912BL or RP90842BL. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-12-17

Will RP90840AR fit 978-ARWE-DST

Asked by: Nmrboy
Hi Nmrboy, thank you for your interest in the RP90840AR! Unfortunately, this does not fit the 978-ARWE-DST. The correct spray assemblies are RP60734AR and RP51480AR. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How do I switch out from my old one

Asked by: Scottydog
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. To remove the wand, please refer to page 10 in the link below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-02-03

do you have dis-assembly instructions for the Delta A111218 Spray head RP90840AR

Asked by: West
Hi West, thank you for contacting Delta Faucet Company! The RP90840AR is the wand for our Esque model 9181-AR-DST. To remove the wand, please refer to page 10 in the link below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-02-23

We have this type of delta kitchen faucet head. It plugs up after about 3 days use. I can soak it in diluted white vinegar and it will work about 3days and plug up. It is the only faucet in the house that does this.

Asked by: Vaughnster6624
Hi Vaughnster6624, Thanks for your question regarding RP90840AR! Flushing my resolve this concern. Please see the link below on how to flush your DST model. Please feel free to contact us with any questions or for further assistance. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Will it fit on 9178 rb dst single handle faucet.

Asked by: Mike
Hi Mike, Thanks so much for contacting Delta Faucet Company! No, the RP90840RB would not work with your 9178-RB-DST faucet, as the wands are model specific and will only fit the faucet it is manufactured for. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is there a different style spray head that would fit this faucet other than the RP90840RB?

Asked by: Erick
Hi Erick, Thanks so much for contacting Delta Faucet Company! The ESQUE® Wand Assembly ShieldSpray MODEL#: RP90840RB works for the Delta 9181T-RB-DST faucet. Unfortunately, there is not another wand assembly for this faucet. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

I have a 104183 faucet and sprayer head. The head is clogged with my hard water. I have attempted to clean it many times only to have it clog up again soon. Would you have a sprayer head replacement for my faucet?

Asked by: Shewolfe
Hi Shewolfe, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! Unfortunately, 104183 is not a Delta Faucet model number. See here for help identifying the model and finding replacement parts: https://www.deltafaucet.com/service-parts/find-parts-and-identify-product Please contact us directly for additional assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Will this RP90840BL replacement work for model 19998Z- BLSD-DST ?

Asked by: jane
Hello Valued Customer, Thank you for contacting Delta Faucet Company! No, our wand assemblies are not interchangeable due to the design. The wand for our 19998Z-BLSD-DST is RP101094BL. For more parts information, please refer to the link below! https://media.deltafaucet.com/PartsDiagram/DPD-K-19998Z-SD-DST%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-07-22
  • y_2026, m_10, d_10, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_43
  • loc_en_US, sid_RP90840, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 63ms
  • questions, product