Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Technology and Special Features
ShieldSpray®
ShieldSpray®
ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn remnants of food while an innovative shield of water surrounds the jet and mess to keep the splashing contained, so you can spend less time soaking, scrubbing and shirt swapping.
Documents & Specs
Installation Information
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
4.5
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
Coach from
Clogs
Clogs, clogs, clogs. Terrible head
Date published: 2025-11-25
Rated 2 out of
5
by
THegz from
Continually clogged head
Head gets clogged so very poor pressure.
Thought I had a bigger water pressure issue at the house but the plumber diagnosed it was just this head. I use vinegar soak and it gets clogged again in a few weeks. I don’t even live in an area with hard water. Super disappointed in this product. Is there a different head that can be used?
Date published: 2025-09-28
Rated 1 out of
5
by
Von13 from
Clogs constantly causing poor water pressure
We’ve had this for not even 6 months and it is awful.
This spay rig clogs constantly. I use a brush to clean the filter, but that only helps for maybe a day. I don’t have the box nor my receipt any more to return it.
Is there a better faucet head that we can replace this with? So frustrating.
Date published: 2025-03-22
Rated 4 out of
5
by
Johnnie from
Nice look, works well, and is easy to use.
There are 2 different filters that are internal. The aerator filter is easy enough to find, but the one that connects to the water supply is impossible to find. I'm in an area that has the worst water in the state. I've pulled them out and used wire brushes, toothpicks, acids, and pretty much everything else I could think of.
After 30 min of wire brushing, I was able to get full flow back.
Head replacement is half the price of the entire unit so if you have hard water, I wouldn't suggest it unless you are ready to do this. Once every 3 years isn't terrible I guess.
Date published: 2024-12-14
Rated 1 out of
5
by
Inmccl from
Clogs like everyone else says
Mine kept clogging, even after attempting to clean. And as I read the reviews of others it confirmed it’s not just me experiencing this. You would think Delta would do something about it if there is a consensus amongst everyone with this problem. And to make matters worse the replacement cost is offensively high for how crappy of a product it is. It’s PLASTIC, there is no justification for it to be $90, what a slap to the face, especially since it’s just going to clog again eventually… Save yourself the frustration and money and simply buy a replacement off of Amazon for $20 since it’s going to be the same plastic quality anyways without the clogging.
Date published: 2024-10-13
Rated 1 out of
5
by
Betty from
Not a good produce
I purchased this faucet and it has always had low water pressure. It has gotten so bad I needto take the faucet head off to fill my canning pot the water runs so slow through this faucet head. Very discouraging. We have cleaned vigar and a brush and the faucet still will not allow a free flow of water.
Date published: 2024-09-20
Rated 5 out of
5
by
Lafresh from
Very good
3 years without problems. First time with vinegar and brushing the mesh and pressure is back. Stop complaining and do the right thing.Check your water system and pipes. Very helpful. Handyman skills too.
Thanks,
Date published: 2024-09-09
Rated 1 out of
5
by
Ram684 from
Very Very Poor Design
We've had nothing but problems with this faucet. Replaced the faucet head but that only lasted a short time. The water just trickles out and have tried cleaning it numerous times but it's still not satisfactory. Do you have replacement filters at a reasonable price? If not then what type of warranty does this faucet have? I've read numerous reviews regarding this same problem.
Date published: 2024-06-09
Q&A
Does it come in brushed nickel?
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
The spray wand is not available in brush nickel.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-03-19
Is this wand compatible with the Delta Varos DSP-K-19792Z ?
Will thiis sprayer head fit my model 19801-Z-SPSD-DST.
Hi Hector,
Thanks so much for contacting Delta Faucet Company!
No, model 19801Z-SPSD-DST can only utilize the RP101926 wand assembly.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
Is the screen in the input end of the sprayer replacable or removable to clean?
Hi Chas,
Thanks so much for contacting Delta Faucet Company!
Yes, the aerator can be removed to be cleaned or replaced with the RP90248 cache aerator and wrench. Please see the following link for more information.
https://www.deltafaucet.com/parts/product/RP90248.html
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2022-12-07
exploded view and disaasembly
Hi West, thank you for contacting Delta Faucet Company!
We apologize for any issues you may have experienced! If you experience any issues with any of your Delta Faucet Company products, please reach out to us directly!
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2023-02-22
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.