Single Handle Bathroom Faucet in Chrome

Thank you for your question, Annalisa! The Champagne Bronze finish is a Brilliance® finish designed to look like new for life. Delta's Brilliance® finishes are more durable than traditional clear coating as these finishes won't corrode, tarnish or discolor. These finishes are tested against more than 100 common household cleaners and will even withstand prolonged exposure to hard water or sea air. https://www.deltafaucet.com/design-innovation/innovations/kitchen/brilliance-finishes Best regards, Edward

Thank you for your question. Delta Faucet model # 551-SS-DST needs 4.625 inches between the sink edge and the backsplash.

So, Rosanna, the spotshield is not the same color as the stainless steel but with spot resistance

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi ChrisP, Thank you for your question! Our Stainless Steel (SS) is a Brilliance finish. https://www.deltafaucet.com/design-innovation/innovations/kitchen/brilliance-finishes Best regards, Jon

Hi, Kathy! Thank you for your question. At this time, we do not make an extension kit for the Delta 551-SP-DST Faucet. The faucet fits on a deck with a maximum thickness of 2 7/8" (73 mm). Best Regards, Rosanna

Hi Chuck, Thanks so much for contacting Delta Faucet Company about 551-DST! The RP50587 cartridge is included with model manufactured prior to 1/23/2022. https://media.deltafaucet.com/PartsDiagram/DPD-L-551-DST%20Rev%20D.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Nick N, Thanks so much for contacting Delta Faucet Company! It is possible that a flush could resolve this issue. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the fully open middle position, and then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and repeat with the second line. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Renee, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet DELTA® Dryden™ Single Handle Bathroom Faucet In Chrome MODEL#: 551-DST aerator will need the supplied wrench. The 9113-RB-DST aerator can remove, with the wrench, or the entire hose can unscrew from the spray assembly. Please see the maintenance and installation sheet in the link below for the information on page 10. Model 1977-RB-DST aerator removes by turning counterclockwise by hand. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Rita, Thanks so much for contacting Delta Faucet Company! The 551-DST aerator is the RP101953-1.2, I have included a link below to the parts diagram for your model. https://media.deltafaucet.com/PartsDiagram/DPD-L-551-DST%20Rev%20D.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Bill, Thank you for your question about the Delta Faucet model 551-DST. Please accept our apologies for the inconvenience you are experiencing. We are happy to help! For a leak under the handle, we recommend removing the handle and the trim cap and tightening the bonnet nut with a wrench. If the issue remains, the cartridge may need to be replaced. Please reach out for assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Anita48, Thank you for contacting us! We apologize for the low water pressure you are receiving from your Delta Faucet model 551-DST Dryden™ Single Handle Bathroom Faucet In Chrome. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 551-DST Dryden™ Single Handle Bathroom Faucet In Chrome is only able to reach a maximum of 1.5 GPM, as are all Delta Faucet lavatory faucets. We apologize for any inconvenience this may cause. Delta Faucet parts can be purchased online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy To order parts over the phone, please call us at 1-800-345-3358, Monday thru Friday from 7 am to 7 pm and Saturday from 8 am to 5 pm Central Standard Time. We accept Visa or MasterCard. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Jeanne, Thanks so much for contacting Delta Faucet Company! Yes, this model 551-DST can be installed in a 4" centerset application. Please note that the RP61840 escutcheon needed for that is sold separately. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Debralec, Thanks so much for contacting Delta Faucet Company! The DRYDEN™ Bathroom Faucet MODEL#: 551-DST includes a metal push pop-up drain assembly in matching finish. This faucet is not designed for a standard assembly. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Christin, Thanks so much for contacting Delta Faucet Company! The 551-DST single hole escutcheon, part number RP61839, and can be ordered locally or online. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Mike, Thank you for your question about the Delta Faucet model 551-DST. For models made after 1/23/2022, a replacement cartridge and bonnet are part number RP101762. For a model made before, a bonnet nut is RP54976. See the supply line tag for the date of manufacture. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please refer to the Maintenance and installation sheet in the link below on page 12. https://media.deltafaucet.com/MandI/115729%20Rev%20A.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Eliana, Thanks so much for contacting Delta Faucet Company! The DRYDEN™ Bathroom Faucet MODEL#: 551-DST uses the DRYDEN™ Escutcheon MODEL#: RP61840. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Raymond, Thank you for your question! Unfortunately you will have to order the RP101630SS push pop-up drain separately. Please see the following link for more information. https://www.deltafaucet.com/parts/product/RP101630SS.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Booth, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Dryden™ Single Handle Bathroom Faucet In Polished Nickel MODEL#: 551-PN-DST has an optional 6 in. deck plate available for 3-hole installation, please see the link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-L-551-DST%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Chuck, Thank you for your question about the Delta Faucet model 551-CZ-DST Dryden™ Single Handle Bathroom Faucet In Champagne Bronze. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! This faucet model is currently available for orders. As a made-to-order company, we do not keep a large stock of products or faucets. You can purchase Delta Faucet products at many local dealers and internet sites. If a dealer does not carry a specific item in stock, they should still be able to place an order for you. I recommend using the store locator on our Delta website. https://www.deltafaucet.com/where-to-buy Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Carol, Thank you for your question! Please accept our apology for the inconvenience you are experiencing. We are happy to help! Reduced flow is likely caused by trapped debris or sediment in the faucet. I recommend flushing the faucet after removing the aerator with the included wrench. Turn the handle to the full mixed position to flush for one minute. Please reach out for further assistance or with any additional questions! Best Regards, Bryan

Hello Fred, Thank you for contacting us. I apologize that the information you are looking for is not readily available for you; however, I am happy to help you. To remove the handle you will need to remove the button cover and then remove the set screw with a 1/8 inch allen wrench. Please contact us back if you have any questions or need further assistance. Best Regards, Emma

Hi MargaretT, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello Kathy, Thank you for contacting us, I would be happy to help you. Our faucets have SS (A neutral, low-gloss finish) , SP (A spot-resistant, warm, low-gloss finish) and BN (A warm, muted finish), these finishes will match a brushed nickel faucet. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi sal76, Thank you for your question about the Delta Faucet model 551-RB-DST. The replacement aerator options will depend on the manufacture date of the faucet. For models produced after 01/23/2022, the aerator is part number RP101953-1.2. For models produced prior to 01/23/2022, the aerator is part number RP54977. The date of manufacture can be found on the supply line tag. You can purchase Delta Faucet products at many local dealers and internet sites. If a dealer does not carry a specific item in stock, they should still be able to place an order for you. I recommend using our store locator. https://www.deltafaucet.com/where-to-buy Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for contacting us, I would be happy to help you. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Please contact us back if you have any questions or need further assistance. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Finsfan, Thank you for your question about the Delta Faucet model 551-SS-DST. This faucet model currently includes a push pop-up drain assembly. Models made before 01/23/2022 included a pull rod drain. Dryden faucet models 3551-MPU-DST and 2551-MPU-DST currently include a pull rod drain. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist