Single Handle Bathroom Faucet
Trinsic®
Model#: 559HA-BL-DST
Trinsic Single Handle Lavatory Faucet is rated
out of
5 by
8.
Compare
Favorite
Add To A Project
View my Items
Print
Finish:
Matte Black
List Price (US $):
$327.75
-
Water-Efficient
-
No-Lead Compliant
-
WaterSense® Labeled
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- Single hole installation
- Metal push pop-up
- ADA Compliant
- High-arc spout swivels 360degrees
- Water-efficient faucet helps you conserve water and protect one of Earth’s most valuable natural resources
DIAMOND™ Seal Technology
Installation Information
Single hole installation
- Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
- Spout Height: 8-7/8"
- Spout Length: 5-9/16"
- Fittings Type: 3/8" compression fittings
- Drain Type: Metal push pop-up
- Deck Thickness: 3"
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: DIAMOND™ Seal Valve
Rated 5 out of
5
by
Connie from
I would buy this product
Great product
Date published: 2018-05-13
Rated 2 out of
5
by
Noisy from
Bought two for our new pedestal sinks. They are really nice looking faucets however they are extremely noisy.
Bought two for our new pedestal sinks. They are really nice looking faucets however they are extremely noisy. I have spoken with Delta and they are sending me two new cartridges to replace. I had the customer service rep listen to the over the phone and this is the repair they believe will improve the excessive noise.
The customer service rep was very friendly and understanding. I hope this solves the issue as they look great on the pedestals
Date published: 2018-01-21
Rated 4 out of
5
by
GBear from
I like the features
I chose it because you can move it from side to side.
That makes is easier to clean the sink.
Date published: 2017-11-03
Rated 5 out of
5
by
Jakeline from
We love our Trinsic faucets!
We love our Trinsic faucets. All 4 of our bathrooms have the same Trinsic faucets. We also have 2 Trinsic Kitchen Faucets installed in our kitchen, one in the Butler's Pantry and another in the Laundry Room. Great design, wonderful product. I would highly recommend DELTA!
Date published: 2017-10-05
Rated 5 out of
5
by
Better from
This faucet is very attractive, works well and I love the fact that the arc has the swivel capability.
I love the way it looks. The other thing I find very nice is the capability of the arc to be able to move from side to side. Very happy with my purchase. I've had Delta products before and have always been happy with them.
Date published: 2017-07-31
Rated 5 out of
5
by
JTC from
Great faucet
Faucet looks good and operates smoothly. Water is dispensed evenly with good pressure.
Date published: 2017-04-30
What size hole is required for a granite/solid surface top?
Hello larry65,
Thank you for your question! The recommended hole size for this faucet is 1 1/4" to 1 1/2". You can find this and other measurements in the Technical Specifications for here:
https://media.deltafaucet.com/SpecSheet/DSP-L-559HA-DST%20Rev%20C.pdf
Best regards, Jon
Date published: 2018-06-13
What should I look for in purchasing a sink to ensure this drain fits? The drain cover looks straight like it wouldn’t work in a bowl sink.
Hi there Natalie,
Thank you for your inquiry! The Pop-Up/Drain assembly that comes with the Delta Trinsic Lavatory 559HA-CZ-DST faucet is designed to fit a standard 1 1/2" diameter sink drain. However, the depth of the hole must be 1 5/8" to 2 3/8".
https://media.deltafaucet.com/SpecSheet/DSP-L-559HA-DST%20Rev%20C.pdf
Best regards,
Tanya
Date published: 2018-05-26
Our pop up drain cover is stuck closed. How can we open it?
Hi, Jwagoner263!
Thank you for your question. The drain assembly is spring-loaded. We would recommend to push down and at the same time, twist the stopper to release. If this does not work, we would recommend to replace. The drain assembly is 33W576. Here is a link to this:
https://www.deltafaucet.com/parts-product-detail?modelNumber=33W576
If you should need more assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2018-04-19
Was a deck plate ever developed for this faucet so that it can be used with a 3 hole, four inch center set sink?
Hi, CMart!
Thank you for your question. This 559HA-SS-DST faucet does not have an escutcheon plate available for a 3 hole installation.
Best Regards,
Rosanna
Date published: 2018-04-18
Our vessel sink fits a 1-5/8” drain. Will the included drain work? If not is there an alternative drain that would work?
Thank you for your question, Rose1! The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 1/2" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8".
https://media.deltafaucet.com/SpecSheet/DSP-L-559HA-DST%20Rev%20C.pdf
Best regards,
Tanya
Date published: 2018-03-10
Our plumber ASSURES us that on his printed estimate for our Trinsic tub filler & single-hole faucets ARE the Brilliance finish. Yes or no? (tub filler: #T4759-SS FL/R4700-FL; sink faucets: #559HA-SS-DST) Also, what does the SS refer to? Thanks!
Hi, Sandy1!
Thank you for your question. The SS refers to the Brilliance Stainless Steel finish.The 559HA-SS-DST and T4759-SS are in our Brilliance Stainless Steel finish.
Best Regards,
Rosanna
Date published: 2018-03-09
Does the stainless and brushed nickel Trinsic tub filler AND matching single-hole bathroom faucet come in Delta’s Brilliance finish?
Hi, swight. Thank you for your question! Both the lavatory and tub faucets are available in the Brilliance Stainless Steel and Champagne Bronze finishes. Please click here for more information about Brilliance:
https://www.deltafaucet.com/design-innovation/innovations/kitchen/brilliance-finishes
Best regards, Jon
Date published: 2018-03-08
What materials (inc specifics on "metal" is the trinsic (chrome) faucet made of. I'd like each part detailed. Is there any plastic used in this faucet?Matching shower and bath trim kit is mostly plastic? How can tub spout be plastic and durable?
Hi Anonymous3600,
Thank you for your question. Our faucets are made of several materials, and may depend on which model they are asking about. For example, the 559HA-DST's metal components: The top cap is bronze or 36000 brass, the bonnet nut is 36000 brass, the undercover plate is either stainless steel or 260 brass,the escutcheon is zinc.
We can't provide that level of detail every time. And specific amounts are considered proprietary (trade secret).
But in general, the faucet may contain:
Bronze
Brass (36000, 260) (hub, handle, body, tube, fittings)
Zinc (escutcheon, hub, handle)
Stainless Steel (undercover plate, seat liner, set screw)
Copper (tubing)
PEX-C (puck and tubing)
Silicone (gaskets)
Synthetic rubber - EDPM, Santoprene (hoses)
Vinyl (hoses)
Nylon
Plastics
Best regards,
Tanya
Date published: 2018-02-27
