Single Handle Bathroom Faucet in Chrome

Hello Robert, Thank you for your question. The 564-SSMPU-DST single handle lavatory faucet is in the Brilliance Stainless Steel finish. Best regards, Brandis

Thank you for your question, canadian_remoob! The Delta Ashlyn collection does not have a standing tub filler option currently and we apologize for any inconvenience this may cause. The Delta Stryke free standing Floor Mount Tub Filler, model T47766-SSFL would be the closest stylistically. https://www.deltafaucet.com/bathroom/product/T47766-SSFL Best regards, Edward

Hi Chris, Thank you for your question. The spout on the model 564-SSMPU-DST measures 5-1/8" from the faucet center to the middle of the water stream. Here is a link to the spec sheet. http://www.deltafaucet.com/customersupport/documentation/564-ssmpu-dst.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave

Hi, Susie! Thank you for your question. The clearance to back splash for the Delta 564-SSMPU-DST Faucet should measure at a minimum of 2 1/2" (64 mm). Best Regards, Rosanna

Hi, Kren! Thank you for your question. The 564-SSMPU-DST will be the same exact make and quality where ever you choose to purchase the faucet at. The Lifetime Limited Warranty is the same regardless of where you choose to buy the faucet. Best Regards, Rosanna

Hi, PJW5! Thank you for your question, and I am sorry to hear that you are experiencing some issues with your Delta faucet. There is an adjustment to be able to make your faucet give hotter water. To do this, remove your handle and you will find the stem of the cartridge assembly. There is a switch on the cartridge located above the stem. Switch this to the left side. This will allow the hottest water. This will not adjust the flow for your hot water, however. For low flow at your hot side, we recommend to flush the supply lines for the flow issue. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If you still have issues, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Thank you for your question, Stellar Jay! A DST faucet will never allow water to come into contact with metal and is compliant with current lead legislation. Best regards, Edward

Hello, EML1! Thank you for your question. The tip of the handle is 8 1/8" above the deck surface in the on position. Please refer to the Technical Specifications for more information: https://media.deltafaucet.com/SpecSheet/dsp-l-564-mpu-dst_D.pdf Best regards, Jon

Hi RINDY, Thank you for your question. Unfortunately, we do not make another button for the handle. You can remove the button, however, we recommend to keep it in place as it will prevent buildup from forming around the set screw. Best regards, Jon

Hello, Thank you for your question! Please see the following link for more information. https://www.deltafaucet.com/parts/product/RP101762.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Wiscplayer, Thank you for your question. The Ashlyn model 564-MPU-DST single handle faucet became available to order on 9/12/2014. You should be able to order this faucet from your local retailer or wholesaler that sells Delta products.

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello John, Thank you for your question! That is an outlet connector and spout hose as explained the instructions for this model. It is present because of the design and shape of the faucet.

Hi, Woodcrvr! Thank you for your question. The Metal Pop Up Drain Assembly for the Delta 564-RBMPU-DST Faucet includes overflow holes and would recommend to be used in a sink with overflow holes. Best Regards, Rosanna

Hello! The handle can be removed by pressing downward firmly on the handle and turning it counterclockwise until it fully unthreads from the faucet. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Toothdoc! Thank you for contacting us at Delta Faucet! I will be happy to help! Please see the link below for installation instructions for the Delta Faucet Ashlyn lavatory faucet model 564-MPU-DST. https://media.deltafaucet.com/MandI/106357%20Rev%20C.pdf Best Regards, Tim

Hello cassg, Thank you for contacting us, I would be happy to help you. Brilliance® finishes, designed to not corrode, tarnish or discolor for a “like-new” look for life, are developed by embedding molecules deep into the faucet’s surface, creating a bond that is virtually indestructible with an incredibly reflective shine. We recommend cleaning the faucet with 50/50 white vinegar and water, this will help get rid of any spots. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please refer to the Maintenance and installation sheet in the link below. https://media.deltafaucet.com/MandI/115729%20Rev%20A.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Wear! Thank you for your question and we are happy to help. The Delta 564-MPU-DST temperature can be controlled by moving the lever up and to the left or right for hot and cold. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi LuAnne, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. The Delta Faucet Ashlyn® Single Handle Bathroom Faucet In Chrome MODEL#: 564-MPU-DST Escutcheon - 1 Hole Bathroom In Chrome MODEL#: RP77266 can purchase parts online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Debbie, Thanks for your question regarding 564-MPU-DST! I've provided the Technical Specification Sheets of both models below to better assist you. 564-MPU-DST: https://media.deltafaucet.com/SpecSheet/DSP-L-564-MPU-DST%20Rev%20G.pdf 538-MPU-DST: https://media.deltafaucet.com/SpecSheet/DSP-L-538-DST%20Rev%20F.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the inconvenience you are experiencing and we are happy to help! The aerator wrench varies on the manufacturing date of your faucet. To find the manufacturing date of your faucet, please either refer to the box or the sticker located on the hot water line. The parts can be found in the link below! https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20F.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Laronda, Thank you for your question about the Delta Faucet 564-MPU-DST. Please accept our apologies for the inconvenience you are experiencing with a drip. We are happy to help! Flushing the faucet with the aerator removed can help flush out debris trapped in the faucet that may be causing the issue. Or the RP50587 cartridge may need to be replaced. https://www.deltafaucet.com/parts/product/RP50587.html Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi LTD55! Thank you for your question! I will be happy to help. Unfortunately the escutcheon is not available as a separate component. However, drain assemblies can be purchased separately. Best Regards, Tim

Hi Dixie, thank you for your interest in the 564-MPU-DST! To remove the handle, pull straight up. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello Edward, Thanks so much for contacting Delta Faucet Company! The Ashlyn® Single Handle Bathroom Faucet Model#: 564-MPU-DST fits 1 or 3-hole 4" installations. This faucet includes a 6-inch deck plate. Please refer to the parts diagram for more details. I have attached the link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20E.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Ricky, We’re very sorry to hear about your experience. Our team would like to help resolve this for you as quickly as possible, please reach out to us at 1-800-345-3358. Sincerely, Carrie Digital Communications Specialist

Hello! Please see the following parts diagram to determine which aerator wrench your faucet will use. https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20F.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist