Single Handle Bathroom Faucet in Chrome

Hi Kath, Thank you for your question about the Delta Faucet model 564-SSMPU-DST. Through normal use, and depending on the water conditions in your area, the cartridge may need to be replaced. It is also possible that there is sediment or debris in your faucet. If your faucet is difficult to turn off or drips from the spout when off, I first recommend removing the faucet aerator and running the water for a minute to flush out any trapped debris or sediment. If the issue remains, the RP101762 or RP50587 cartridge may need to be replaced, depending on when the faucet was made. See the parts diagram for more information: https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20F.pdf Please reach out for further assistance or with any additional questions! Best Regards, Bryan

Thank you for your question, JTKT! Model 564-SSMPU-DST is in the Brilliance Stainless Steel finish, but is not available in the Spotshield Stainless finish. Best Regards, Benjamin

Hi Regg, We’re very sorry to hear about your experience. The handle lifts straight up to remove. I have attached the M&I sheet in the link below. https://media.deltafaucet.com/MandI/115729%20Rev%20B.pdf Sincerely, Themar Digital Communications Specialist

Hello, Thank you for your question! Unfortunately we do not offer a stainless steel set screw cover that will fit this model. You may be able to locate an aftermarket cover that will fit. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Wear! Thank you for your question and we are happy to help. The Delta 564-RBMPU-DST can adjust water temperature by lifting the handle and moving it to the left or right for hot and cold. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Sylvia, Thanks for your question regarding 564-RBMPU-DST! You can purchase parts online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Parts Diagram: https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20E.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The faucet is 7 3/4" (197 mm) without the plate and 8 1/8" (206 mm) with the plate. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Joanne, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Single Handle Bathroom Faucet In Stainless MODEL#: 564-SSMPU-DST would need the cartridge replaced. Date of manufacturing would determine the correct cartridge that you would purchase. Please see the link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20B.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole Digital Communications Specialist

Hi Valued Customer, Thank you for your question! Please refer to the specification sheet in the link below. https://media.deltafaucet.com/SpecSheet/DSP-L-564-MPU-DST%20Rev%20H.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi oboeplayer, Thanks so much for contacting Delta Faucet Company about 564-SSMPU-DST! This faucet includes the push pop up and does not have an option for the lift rod. I am sorry for the inconvenience; However, I have included a couple links below to similar models with a lift rod. https://www.deltafaucet.com/bathroom/product/15768LF-SS.html https://www.deltafaucet.com/bathroom/product/555LF-SS.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello! If your handle does not use a set screw (covered by a decorative button), then to remove it you will press downward on the handle and turn it counterclockwise until it unthreads from the rest of the faucet. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Dr. Mary, Thank you for your question regarding Delta Faucet 564-SSMPU-DST! We apologize for any inconvenience you are experiencing, and we will be happy to help! The Delta Faucet hot/cold indicator is part of the handle, RP101656. We look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist

Hello Laura, Thank you for your question! We are happy to help you. The Delta ASHLYN Single Handle Lavatory Faucet comes with a metal pop-up assembly. It drains by using the lift rod on the back of the spout. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Ricky Bobby, Thank you for your question! Unfortunately there is no extension kit for this model. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Trudy, Thank you for contacting us, I am happy to help you. Our Delta model 564-BLMPU-DST has only one set screw cover, RP54974 is model specific. Please contact us back for any further questions. Best Regards, Nicole

Hi CoCoL, Thanks so much for contacting Delta Faucet Company! Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to a build-up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All-Purpose Cleaner, Fantastik® All-Purpose Cleaner, or Windex® Original Glass Cleaner when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: · Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner, Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid bleach-based cleaners. · Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric, and/or phosphoric acids and caustic agents. · Avoid harsh abrasives or polishes. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello! If your model 564-CZMPU-DST was installed before 05/2022 it will use the RP54977 aerator. If installed after that date it will use the RP101643 aerator. https://media.deltafaucet.com/PartsDiagram/DPD-L-564-MPU-DST%20Rev%20F.pdf https://www.deltafaucet.com/parts/product/RP101643.html https://www.deltafaucet.com/parts/product/RP54977.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Jackson64! Thank you for your question. I am happy to help. The Delta 564-SSMPU-DST faucet has a tube that runs through the spout once the water mixes from the hot and cold water lines. That is the purpose of the other tubes on the faucet. Please see the maintenance and installation sheet page 6 to see an example: https://media.deltafaucet.com/MandI/106357%20Rev%20C.pdf Best Regards, Antoine

Hi KB2002, Thank you for your question about the Delta Faucet model 564-BLMPU-DST. After 2/20/2022, the included drain assembly is a push pop-up operated by pushing on the stopper in the sink. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our 564-BLMPU-DST uses different pop-up assemblies according to the manufacturing date. As the flange is obsolete and no longer being manufactured on one and the flange is not available on the other, the pop-up assembly would need to be replaced. We apologize for any inconvenience this may cause. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist