Single Handle Bathroom Faucet in Stainless

Hi, Ryja! Thank you for your question. The 597LF-PNMPU supply line connections are 1/2" connections. Best Regards, Rosanna

Hi, Ksanders78! Thank you for your question, and I am sorry to hear that you are experiencing low flow from your Delta faucet. You may need to flush out the valve body. To flush out the valve body, first turn off the water supply to the faucet.           1. Remove the handle. On the lever handle, you should find a small hex screw that can be loosened with a 3/32" Allen wrench. The handle will lift off when this screw is loose enough.           2. Once the handle has been removed, unscrew the dome-shaped cap. The domed shaped cap will unscrew counter-clockwise.            3. Unscrew the bonnet nut under the cap.          4. After these parts have been removed, you can then pull the valve cartridge assembly straight out.           5. Now, with the valve completely disassembled, place a bucket upside down over the top of the empty brass valve body. Turn the hot and cold water supplies back on and let the water run for about 10 to 15 seconds. The water will come directly up out of the valve and should mostly be deflected back into the sink by the bucket. You might have a little bit of water to clean up, though!           6. Shut off the water supplies. Make sure that the valve cartridge assembly does not have any debris stuck to them and reinstall them. Reinstall the valve cartridge assembly. Reinstall all parts. At this point, you can test the faucet again. If this does not fix the issue, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Hi SJHomeowner, Thank you for your question. The spout from the model 597LF-RBMPU measures 5-13/32" from the faucet center to the center of the water stream. The faucet should fit a sink bowl with your dimensions. Here is a link to the spec sheet for the model 597LF that shows this and other faucet dimensions. http://www.deltafaucet.com/customersupport/documentation/597lf-rbmpu.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave

Hi, Ernie! Thank you for your question. The Delta 597LF-RBMPU faucet does not have an 8" escutcheon option. The escutcheon plate for the faucet is part number RP72711RB. This will fit a 4" center installation. Best Regards, Rosanna

Dear Need2no, Thank you for your question. The Delta Cassidy Lavatory 597LF-MPU has a recommended distance minimum 2 1/2" (64 mm) clearance to the back splash, to ensure room for the lift rod of the faucet. This is the say recommended clearance for all of the standard lavatory Delta faucets. We would advised possible vessel sink style faucets for your install. Best regards, Tanya

Hi, Leslie! Thank you for your question. The Delta 597LF-MPU faucet handle pulls out for cold and pulls toward you for hot. Best Regards, Rosanna

Hello, cooper5ab! Thank you for your question. Unfortunately, we do not have a part to convert the existing pop-up assembly to a push-pop up. However, you can purchase a complete drain assembly such as the 72173 Push Pop-Up with Overflow for use with this faucet. https://www.deltafaucet.com/parts-product-detail?modelNumber=72173 Best regards, Jon

Hi JK, Thank you for your question. The 8" is measured to the faucet centers, this is the measurement between the center of the 2 faucet handles. The model T4797-PNLHP shows a 10"-16" installation to give the lever style handles sufficient space to move freely. This dimension does not include the hand shower. The T4797-PNLHP is too wide for your 9" area. Thanks, Dave

Hello! This model uses the RP73000 valve cartridge. https://www.deltafaucet.com/parts/product/RP73000.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Dear MM, Thank you for your inquiry! Yes, the exterior of the Delta Cassidy Lavatory 597LF-MPU faucet is made of metal. Best regards, Tanya

Hello Jani, Thank you for your question. Delta faucet 597LF-RBMPU is ADA compliant. Best Regards, Courtney

hi mtnbykmyk, Thank you for your question. Unfortunately, we do not have a higher flow or laminar flow aerator for this faucet. Best regards, Jon

Hi KeithA, Thank you for your question. The model 597LF-MPU faucet can be installed on 4" centers. The faucet comes with an optional escutcheon that will cover the unused holes. Thanks, Dave

Hi mow, Thank you for your question! Unfortunately the 597LF-PNMPU does not have another handle option. The H298PN is only compatible with the 2 handle Cassidy faucets. Best Regards, Daniel

Hi, Lizz! Thank you for your question. The handle assembly pulls towards you for hot water on the Delta 597LF-PNMPU Faucet. However, we do recommend a minimum measurement of 2 1/2" (64 mm) Clearance to Back Splash. Best Regards, Rosanna

Hi, Stephen! Thank you for your question. At this time, we do not make another version of the Delta 597LF-PNMPU Faucet with the handle assembly on the left side. We do apologize for any inconvenience this may cause. Best Regards, Rosanna

Hello Valpar3, Thank you for your question. The handle of the Delta Cassidy Lavatory 597LF-MPU faucet is designed for this specific model style. We can not guarantee the parts of our faucet will work/fit with other company faucets or parts. Best regards, Tanya

Thank you for your question, Eric D! Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse the surface thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with Windex® Original Glass Cleaner. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best regards, Edward

Hi KikiB, Thank you for your question! The handle will only rotate forward from the upright position. However, we do recommend to have 2 1/2" clearance from the center of the faucet to the back splash. Best regards, Jon

Hello Kim S, Thank you for your question. The handle temperature rotation of the Delta Cassidy Kitchen 9197-AR-DST and Lavatory 597LF-MPU faucets are just differently designed. However switching the supply lines connections to the valves, below he sink on one of the units would be a suggestion we would have. Best regards, Tanya

Hello Jet333, Thank you for your question! The Delta Cassidy Lavatory 597LF-MPU faucet is only designed with the handle on the right side of the faucet. Best regards, Tanya

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company about 597LF-SSMPU! Leaking under the handle can be caused by the bonnet nut being loose, we would recommend removing the handles and tightening the bonnet nuts. Start by shutting off the water to prevent a possible issues when troubleshooting. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Andrew Somple, Thank you for your question! We apologize for the flow issue you are experiencing and will be happy to help you. Reduced flow is typically caused by the debris. We recommend flushing the unit. To flush the unit: Remove aerator using supplied wrench and turn faucet handle to the full on mixed position. Turn on hot and cold water supplies and flush water lines for one minute. This flushes away any debris that could cause damage to internal parts. Reinstall aerator with wrench. Check all connections at arrows for leaks. Retighten if necessary, but do not overtighten. Please refer to page 4 section 5 of the maintenance and installation guide for more details. I have attached the link below. https://media.deltafaucet.com/MandI/86520%20Rev%20F.pdf Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi joan, Thank you for your question about the Delta Faucet model 597LF-SSMPU. The faucet is typically installed so that pulling the handle forward will increase the temperature. Please reach out with any additional questions! Best Regards, Bryan

Hello! You can remove the handle by pressing in on it firmly and turning it counterclockwise until it fully unthreads from the faucet. https://media.deltafaucet.com/PartsDiagram/DPD-L-597LF-MPU%20Rev%20G.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello! Thank you for your question. I am happy to help you. The letters "SS" in a model number indicate the Stainless Steel finish. Please contact us back if you have any questions or need further assistance. Best Regards, Natasha Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com |

Hello! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! The new aerator part number for this Delta Faucet Cassidy 597LF-MPU lavatory faucet is RP52657-1.2. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi Peter, Thanks so much for contacting Delta Faucet Company! Yes, the CASSIDY™ Bathroom Faucet MODEL#: 597LF-SSMPU has our Brilliance® finish. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi AnnaM, Thank you for your question about the Delta Faucet Cassidy model in stainless 597LF-SSMPU. Models produced after 04/28/2024 have a push pop-up drain, and a replacement is RP101630SS. https://www.deltafaucet.com/parts/product/RP101630SS.html A lift rod type replacement drain is RP26533SS. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist