Delta®

Floor Mount Tub Filler - Rough

Model#: R4700-FL
Add to Favorites
Find local Delta® installers.
Delta®
Floor Mount Tub Filler - Rough
Model#: R4700-FL
List Price: $37000
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
This rough-in kit may be installed prior to choosing the specific trim and finish. Allows for construction or a renovation project to proceed without delays when narrowing down a design style. Trim kit is sold separately and is required to complete the unit. Save time, effort, and money on future renovation updates because there’s no need to alter plumbing in the floor.
  • Rough-in kit only
  • Must purchase trim kit to complete the unit
  • Machined brass body with stainless steel mounting plate
  • Cartridge ships with trim
  • 1/2 in. sweat rough-in
  • Product ships with test plugs and plasterguard
Special Information
Warning Image
California Prop 65 WARNING
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Quick Start Guide
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Installation Information
Single hole installation
Single hole installation
Overall Height (in.) :
5-1/2
Valve Type:
Single-function pressure balance cartridge

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Floor mount bracket Must have to prevent rocking.
Date published: 2026-01-15
Rated 1 out of 5 by from Beware of little plastic stops. The plastic temporary stops break and will not hold pressure. Caused a flood in clients home.
Date published: 2025-04-24
Rated 5 out of 5 by from It was an Awesome rough in very easy and clean Easy to install minimal tools needed
Date published: 2024-10-21
Rated 5 out of 5 by from Perfect above floor fit Perfect for our needs. We could not do a sub floor plate install so this was perfect and the fit was exact.
Date published: 2023-11-28
Rated 5 out of 5 by from Authentic Product Work exactly as expected!!
Date published: 2023-08-23
Rated 5 out of 5 by from Gorgeous Beautiful and elegant. The sitting position is a bit different than a standard tub, but works well.
Date published: 2023-08-13
Rated 5 out of 5 by from Works well Rough in works well. I use it on every job.
Date published: 2023-06-02
Rated 5 out of 5 by from My Review The product I need and quick shipping
Date published: 2023-01-28
  • y_2026, m_6, d_16, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_R4700-FL, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

Cassidy freestanding faucet?

Rough in? What is the difference between the R4700-FL and the R4700-FLWS? Which is better for the Cassidy Faucet Is there an alternative to the above? I am concerned with lead in the products above.
Asked by: SC
Hi SC, Thank you for your question. The R4700-FLWS has supply stops that allow you to shut off the water at the valve during installation. It also will accepts threaded supply connections. The R4700-FL does not have stops and requires soldering. These are the only rough-in valves for our freestanding tub fillers. Please know that all of our products meet or exceed industry standards for performance and safety. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

What's the GPM for the valve and the also the GPM for the high flow cartridge?

Asked by: Jim
Hi Jim, Thank you for your question. The floor mount tub filler flows at a rate of 6-9 gallons per minute with the pressure balanced cartridge and 10-12 GPM using the high flow cartridge depending on your household water pressure. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

What freestanding tub filler, in polished chrome , works w this valve

Asked by: heath
Hi, Heath! Thank you for your question. We have numerous floor mount tub fillers in our Chrome finish. Here is a list that are available at this time: T4768-FL T4774-FL T4767-FL T4752-FL T4797-FL 144759-FL T4759-FL You can also view them here: https://www.deltafaucet.com/bathroom/bathing/tub-fillers Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

We had a contractor install a Delta R4700-FLWS rough-in valve with a Delta T4756-BLLHP-FL floor mount tub filler trim. The water doesn't come out as hot as the shower or sinks in the same room. Is there a mixing valve in the rough-in that controls this?

Asked by: Greg
Hello Greg, Thank you for contacting Delta Faucet Company. I am sorry to hear that your Floor Mount Tub Filler - Rough MODEL#: R4700-FL is not getting hot enough, which can be very frustrating. I am so glad that you contacted us, so we can get this taken care of for you! The shower unit can be adjusted, I have attached a link to show how to adjust the RLS on our Delta shower cartridges. This will provide the option of hotter water, also, we recommend making sure the water heater temperature is set to 120 or lower. https://www.youtube.com/watch?v=By5b7uazCqM Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

What is the difference between the R4700-FL and R4700-FLWS?

Asked by: HoJo
Hi HoJo, Thank you for your question! Model R4700-FLWS includes shut-off stops which allows you to close water off to the valve without having to turn the home's water shut-off valve off. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-29

I know that the Delta R10000 is basically the same rough as the R60000. Is this true with this floor rough R4700-FL and the Brizo R70100? Basically I am wondering if an R4700-FL is roughed in will a Brizo T70150-PC trim fit it? Thanks.

Asked by: Nick
Hello Nick, Thank you for contacting us, I would be happy to help you. Correct the Delta R4700-FL would accept the trim kit model T70150-PC. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

Are there extensions kits available for the R4700-FL floor mount tub filler? If so, what are the lengths available?

Asked by: Ed11
Hi Ed11, Thank you for your question about the Delta Faucet RP63228! We are happy to assist you! We have a variety of freestanding tub fillers available. Please review the link below to browse our collections. https://www.deltafaucet.com/bathroom/bathing/tub-fillers?prefn1=narrowResults&prefv1=hideDiscontinued&prefn2=recertified&prefv2=false&cgid2=Delta_Bathroom_Bathing_Tub-Fillers_Free-Standing-Tub-Fillers Please contact us directly with any further questions. We appreciate your loyalty to Delta Faucet Company. We look forward to better serving you in the future! Best Regards, Kyra Digital Engagement Specialist (800) 345-3358 Monday - Friday 8:00 AM - 7:00 PM ET Saturday 9:00 AM - 6:00 PM ET
Answered by: Customer Service
Date published: 2024-03-28

I'm looking at a t4797 fl lhp to go with this. Is the height adjustable? The tub in this case is 24" and the spout is 40" . it seems too tall.

Asked by: Keviv
Hello Keviv, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model T4797-FL-LHP Single Handle Floor Mount Tub Filler Trim With Hand Shower - Less Handle spout height is not able to be adjusted. Please contact us back directly with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

I'm trying to test my installation but the test plugs leak

Asked by: Vickie

In this interchangeable with any of your other bath fillers?

Asked by: Cheryl
Hello, Cheryl! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! Yes, this Delta Faucet model R4700-FL Floor Mount Tub Filler Rough will accommodate our free-standing tub fillers. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

How do you adjust the temperature on the floor filler? Is it a screwdriver or allen wrench?

Asked by: MrTeach
Hi MrTeach, Thanks so much for contacting Delta Faucet Company about, R4700-FL! The temperature can be adjusted through the cartridge, I have included a link below to the installation guide of the trim kit. See page 6 for adjusting the RLS. https://media.deltafaucet.com/MandI/107565%20Rev%20D.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-05-01

There is no measurement for how high the risers can be above the finished (tiled) floor. I have installed the rough in on top of the stringer and worry that the risers might be too long to go inside the T4759-FL Faucet. Please advise

Asked by: Ruthless
Hello Ruthless, Thank you for contacting us, I would be happy to help you. Please see page 3 in the link below, this has the installation information needed for mounting the rough. Since there are different ways to install, the install sheet provides the thickness of the stringer and the thickness of the finished floor. As long as these measurements are made then the trim kit would adapt properly. https://media.deltafaucet.com/MandI/74821%20Rev%20G.pdf Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

What are the sizes of the inlet supply lines?

Asked by: Rich 1968
Hi Rich 1968! Thank you for your question and we are happy to help. The supply lines are 1/2". With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2023-04-06

How do you remove the valve once installed into faucet.

Asked by: Gramps
Hello Gramps, Thank you for contacting us! I am happy to help you! To remove the valve from the Delta R4700-FL you will need to remove the handle, trim sleeve, and bonnet. You are able to pull the valve out once those parts are removed from the trim. Please note that the water should be turned off either when disassembling the faucet. Please contact us with any questions or for further assistance. Best Regards, Emma
Answered by: Delta7
Date published: 2024-03-28

I need a floor mount faucet that accommodates a delta R4700 FL rough in valve, can you tell me what would work with this valve???

Asked by: carrie
Hi carrie, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Floor Mount Tub Filler - Rough MODEL#: R4700-FL will work with any of our current freestanding tub fillers, please see the link below. https://www.deltafaucet.com/bathroom/bathing/tub-fillers?prefn1=narrowResults&prefv1=hideDiscontinued&prefn2=recertified&prefv2=false&cgid2=Delta_Bathroom_Bathing_Tub-Fillers_Free-Standing-Tub-Fillers Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

Instructions say to use a plastic liner to prevent direct contact with concrete...what is the mil needed?

Asked by: jimb
Hi jimb, Thank you for contacting Delta Faucet Company! Our R4700-FL does not require a plastic liner, however, our R4700-FLWS does to prevent direct contact of concrete for the rough and supply connections. There is not a specific liner we recommend. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-06-11

can I get instructions to install rough in for tub filler in concrete slab?

Asked by: Rico

Are you able to use this with a concrete slab or would the flws be a better option?

Asked by: IanK
Hello IanK, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model R4700-FL Floor Mount Tub Filler - Rough can have a concrete slab installation. Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

wondering flow rate per minute @ 60psi

Asked by: KB61
Hello Anonymous, Thank you for contacting us, I am happy to help you. Our Delta R4700-FL flows at a rate of 6-9 gallons per minute with the pressure balanced cartridge and 10-12 GPM using the high flow cartridge depending on your household water pressure. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

This seems great for new construction but not for a remodel.  Specifically, how do you place the stringer with an existing subfloor without cutting a hole in the ceiling below or ripping up the subfloor?

Asked by: Paul
Hi Paul, Thank you for your question about the Delta Faucet model R4700-FL Floor Mount Tub Filler - Rough. I am sorry this information was not readily available, and I am happy to help! Yes, a mounting stringer would need to be in place to install this rough. You would need access under the subfloor. We apologize for any inconvenience this causes. See the installation instructions for more information. https://media.deltafaucet.com/MandI/74821%20Rev%20G.pdf Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Do you have a rough in that I can connect using PEX?

Asked by: Adam
Hi Adam, Thank you for your question! Unfortunately we do not offer that installation type at this time. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-22

The floor that my customer has in his bath has been changed and has gotten thicker. Is there an extension kit for the r4700fl? Please advise.

Asked by: john
Hi john, Thank you for your question about the Delta Faucet model R4700-FL. This rough has a maximum floor thickness of 2 1/2". The similar model R4700-FLWS allows for up to 3" of floor thickness if needed. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

Do you make extension nipples for these or longer ones. I have one roughed in a about 3/4 low

Asked by: Dirty
Hello Dirty, Thank you for your question! I will be happy to assist. Unfortunately, we do not manufacture any extensions for R4700-FL. Please contact us back if you need further assistance. Best Regards, Kyra
Answered by: Delta7
Date published: 2024-03-28

We have a new construction project, and want to install a free standing pedestal faucet on a concrete slab. I notice most installations are on a raised floor with joists- how do we accomplish this on a slab?

Asked by: Dennis
Hello Dennis, Thank you for your question! I am happy to help you! Our Delta Faucet model R4700-FL can be installed on a concrete slab, Please see page 6 of the installation guide for concrete installation steps. https://media.deltafaucet.com/MandI/74821%20Rev%20G.pdf Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Are there supply tubes for the R4700-FL that can use Propress fittings?

Asked by: Greg
Hi Greg, Thanks so much for contacting Delta Faucet Company about, R4700-FL! We do not have alternative supply tubes for different connections, I am sorry for any confusion this may have caused. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-30

My sister's plumber installed the mounting plate directly on top of the subfloor instead of on top of the 2x12 riser under the subfloor per the instructions. When called on it, he says its nothing to worry about and it will work just fine. Thoughts?

Asked by: Travis M
Hi Travis, Thank you for your question about the Delta Faucet model R4700-FL Floor Mount Tub Filler - Rough. I am sorry this information was not readily available, and I am happy to help! We recommend installing the rough according to the installation instructions. Installing the mounting plate to the stringer provides stability for the tub filler trim. https://media.deltafaucet.com/MandI/74821%20Rev%20G.pdf Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Do you make the same rough in but instead of sweating in connections, one can be use with pex connections?

Asked by: MikefromNC
Hi MikefromNC, Thank you for your question! Unfortunately, we do not offer pex for this style valve at this time. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-11
  • y_2026, m_6, d_16, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_35
  • loc_en_US, sid_R4700-FL, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 52ms
  • questions, product
PART LIST

PART LIST

Image-RP74816

Trinsic®

Trinsic® Test Plug - Floor Mount Tub Filler

List Price: $17.95
Online Price: $14.36
Free Ground Shipping All Orders $49+

RP74816

Image-RP74817

Trinsic®

Trinsic® Plasterguard - Floor Mount Tub Filler

List Price: $20.80
Online Price: $16.64
Free Ground Shipping All Orders $49+

RP74817

Image-RP74814

Trinsic®

Trinsic® Threaded Studs - Floor Mount Tub Filler

List Price: $40.95
Online Price: $32.76
Free Ground Shipping All Orders $49+

RP74814

Image-RP74815

Trinsic®

Trinsic® Supply Tubes Rough w/ O-Rings - Floor Mount Tub Filler

List Price: $91.45
Online Price: $73.16
Free Ground Shipping All Orders $49+

RP74815

Image-RP74812

Trinsic®

Trinsic® O-Rings - Rough Tubes

List Price: $11.40
Online Price: $9.12
Free Ground Shipping All Orders $49+

RP74812

5.00 2
Image-RP74813

Trinsic®

Trinsic® Mounting Plate - Floor Mount Tub Filler

List Price: $152.10
Online Price: $121.68
Free Ground Shipping All Orders $49+

RP74813

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.