3-Setting 2-Port Diverter Trim in Champagne Bronze

Thank you for your question. We do not make a diverter trim in the Brushed Nickel finish. However, Stainless Steel is a brushed finish that is very similar to Brushed Nickel. We recommend comparing them in the store. Best regards, Jon

Hi Larry, We are sorry that you are experiencing a problem with your installation. Unfortunately if the valve is plumbed out too far we do not offer any alternative trim rings or extensions to fix the issue. The valve will have to be replumbed. Step 1 of the attached installation manual shows the dimension at which the diverter rough should be installed. http://www.deltafaucet.com/customersupport/documentation/r11000.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper Thanks, Dave

Thank you for your question. Delta Faucet model T11800 can be used to divert the water to a handheld shower. You will also need the R11000 rough-in valve to complete your faucet.

Hello! Thank you for your question. We recommend using a 6 setting diverter cartridge if you are using the right port. The part number for this is RP51919. Please note, there will be blank settings if you are not using all three ports. Best Regards, Rosanna

Thank you for your question, Linda! Model T11800-RB is part of the Tesla collection. Some examples of the valve trims in this collection are models T17T052,T17052 and T14052. Best Regards, Benjamin

Hi Sbergtc, Thank you for your question. Sweet Lou is correct. Thanks for the contribution. Dave

Thank you for your question, bill! The T11900-PB 6-setting diverter trim and cartridge will allow you to use three separate products individually as well as together in a shared function. If you do not want any of the functions to operate at the same time, the three setting, non-shared cartridge, RP71718 can be purchased separately and used instead. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP71718 Best regards, Edward

Dear Ron, Thank you for your question. The Delta 3-Setting Diverter Trim T11800 comes with the 3-Setting Diverter Cartridge Assembly RP51918. The Delta 6-Setting Diverter Trim T11900 comes with the 6-Setting Diverter Cartridge Assembly RP51919. https://media.deltafaucet.com/PartsDiagram/DPD-B-T11800.pdf Best regards, Tanya

Hi Jerryr, Thank you for your question. Shower trims from our Leland collection models T14278-RBLHP H778, and T17278-RB as well as trims from our Lahara collection T14238-RB and t17238-RB will match the T11800-RB and use the R10000-UNBXHF high flow rough. Thanks, Dave

Rich rev Thank you for your question, and I am glad to help you. Here is a link to the specs for T11800: https://media.deltafaucet.com/SpecSheet/dsp-b-t11800_E.pdf Best regards Eric

Hi Valued Customer, Thank you for your question regarding our Delta Faucet T11800-CZ. Please refer to the Maintenance and Installation manual as well as the Technical Specifications below. https://media.deltafaucet.com/MandI/70551%20Rev%20J.pdf https://media.deltafaucet.com/SpecSheet/dsp-b-r11000_F.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 pm. m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Steve, Thank you for your question! No, this model T11800-CZ can only install onto the R11000 diverter rough-in valve. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello Upgrader, Thank you for your question. I will be happy to assist you! Yes, this works in a shower-only installation. Please contact us back if you need further assistance. Best Regards,

Hello! Thank you for contacting Delta Faucet Company! Our T11800 uses two ports, and possibly a shared option. The flow may vary depending on the PSI to the home and the components that are installed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Piercy! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. For the Delta Faucet 3-Setting 2-Port Diverter Trim In Venetian Bronze MODEL#: T11800-RB valve installation, please refer to the maintenance and installation link below: https://media.deltafaucet.com/MandI/92343%20Rev%20B.pdf. As for the shower head, we recommend flushing the valves of the shower after new installations. To do so, please follow the instructions below: Turn off the hot and cold supply to the valve. This may involve shutting off the water to the entire residence, or for the room or fixture. [Or there may be supply stops on the valve itself behind the escutcheon requiring removal of the handle.] Turn the volume control on to relieve any pressure behind the valve. Remove the handle, There may also be a trim sleeve to slide off of the valve. If you have supply stops on the valve itself, you will remove the escutcheon plate to access those. Remove the bonnet. A strap wrench works best to not deform the bonnet. Caution: Be careful not to twist the valve. Remove the cartridge by wiggling as you pull, taking care to protect the stem. If the cartridge has a metal stem, reattach the handle to provide a better grip. Check inside the valve for any other components and remove those. Once all the parts have been removed from the valve, close the shower curtain or door. Caution: the water may be very hot. Turn both of the water supply valves on full and let the water run for 60-90 seconds. Perform any maintenance on the removed components. Reassemble the shower valve. Check for leaks. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hi Levick13, Thank you for your question about the Delta Faucet model T11800. Unfortunately, this diverter trim is not part of a specific collection. We carry a variety of valve trims to complement most styles. See our current selection here: https://www.deltafaucet.com/bathroom/bathing/tub-and-shower-faucets/shower-valve Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet T17T038-SS. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Yes, the trims and valves are compatible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Frank, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing finding this information. We will be happy to assist you in resolving this issue as quickly as possible. The Delta Faucet 3-Setting 2-Port Diverter Trim In Chrome MODEL#: T11800 set screw is #10-32 x.5. The screw is available to order as RP26865. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Vikigar, Thanks for your question regarding T11800-SS! There are not any larger escutcheons for this model. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! The 3-Setting 2-Port Diverter Trim MODEL#: T11800 handle can be removed by using an allen wrench to remove the set screw. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi dave! Thank you for your question and we are happy to help. Unfortunately, the entire handle would need to be replaced. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Gary, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet 3-Setting 2-Port Diverter Trim In Chrome MODEL#: T11800 would be the best match for the Lahara collection, unfortunately we do not have a matching diverter trim. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Bernie, Thank you for your question! I am happy to help you! Our Delta T11800-SS accepts the RP51918, which is a 3 function shared cartridge. Please see the link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-B-T11800_B.pdf Please contact us back for any further questions. Best Regards, Nicole

Hi Shelley! Thank you for your question! Unfortunately we don't offer another escutcheon for this model. We apologize for any inconvenience this may have caused. Best Regards, Tim

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We do not manufacture a larger escutcheon plate, however, our Victorian collection has a back plate that will add another inch on one side, and a half inch on the other. Please refer to the link below! Backplate - https://www.deltafaucet.com/parts/product/RP42414.html Trim showing the back plate - https://www.deltafaucet.com/bathroom/product/T11855.html#documents-and-specs We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist