6-Setting 3-Port Diverter Trim in Venetian Bronze

Hi, Jstila! Thank you for your question. This will need a diverter rough in, R11000, along with the valve body, Delta MultiChoice R10000-UNBX. You will also need the valve trim kit. For more information and assistance, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna

Hi Brian, Thank you for your question. The T11953 diverter trim will reduce the flow rate of your chosen valve trim from the previous question by at least 1.5 gallons per minute. The diverter does not produce flow, it simply directs the water where to go. Thanks, Dave

Hi jl, Thank you for your question! At 60 PSI the maximum flow rate from each port of the valve is about 5.6 gallons per minute. Thanks, Jon

Thank you for your question. Delta Faucet model # T11953 does have an extension kit available that will add 1" to the installation. It is model # RP75137 and can be ordered and purchased from the local retailer or wholesaler.

Hello Jose, Thank you for your question. The Delta Vero 6-Setting T11953 will allow you to divert between three components (A, AB, B, BC, C, CA). You would need to install another valve body Delta MultiChoice R10000-UNBX and also the valve trim kit for fourth component (hand shower, shower head or the two body sprays) installation. Best regards, Tanya

Hello bornmccready, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet VERO® 6-Setting 3-Port Diverter Trim MODEL#: T11953-RB would allow for 3 items to be run off this diverter, We recommend the tub spout to be ported from the T17053-RB. Here is what we recommend: R10000-IP T17053-RB RP53419RB If you are only using a tub spout this should be all you need, if you are adding a showerhead and/or a hand shower then the R11000 and T11953-RB would be needed as well. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Don63, Thank you for contacting Delta Faucet Company! To install a new diverter trim with the older R11600 diverter rough-in you will need the following: RP42410 - cartridge (OBS) RP37890 - extension screw (OBS) RP37902 (3 function stem extender) OR RP37903 (6 function stem extender) Some of these parts can be found online or locally. If you are unable to find parts, the rough-in valve will need to be updated to the R11000. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello SonofaPlumbJob, Thank you for your question about the Delta Faucet model T11953 Vero® 6-Setting 3-Port Diverter Trim In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! We would not recommend plumbing a tub spout to a diverter outlet, only because the flow rate will be less than expected. As the diverter cartridge was designed to supply water to showerheads, body sprays and hand showers, the flow from the tub spout could be noticeably reduced compared to the standard direct flow from the control valve. I would recommend a diverter tub spout plumbed to the tub outlet of the valve rough-in, to ensure a good flow rate into the tub. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan