Monitor® 13 Series Valve Only Trim in Stainless

Hi, Becky22! Thank you for your question. Any of our Delta T13, T14, T17, and T17T Series trim kits will work with our Delta MultiChoice R10000 rough valve body. Best Regards, Rosanna

Thank you for you Jake20! The trim plate or escutheon has screw holes that correspond with the brackets and valve body. Further instructions can be found on page 8 of the maintenance and installation manual. https://media.deltafaucet.com/MandI/X00068881_M.pdf Best regards, Edward

Thank you for your question. The 600 series faucets use a different valve system than the 1300 series faucets and they are not interchangeable. However, we do manufacture a renovation kit for the 600 series to upgrade it. Delta Faucet model # RP54870 is available in Chrome, Venetian Bronze, and Stainless Steel. It includes everything except the showerhead, shower arm and flange, and a tub spout if it is needed.

Hi JT, Thank you for your question. The model T13020 does not offer temperature memory. Our 17 series faucets offer both temperature and volume control. This will allow you to leave the temperature control at your desired setting and turn off the water volume. When you turn on the faucet volume the next time you use the faucet the water temperature should be the same. Model T17230 would be an example of this series. Thanks, Dave

Thank you for your question Jay Baumstein! The Delta T13020 does not require a set screw cover. When you turn the handle to shut off the faucet, any water that is in the hole will drip out. Best regards, Christina

Hi, Sarah! Thank you for your question. The Delta Monitor T13020 Valve Trim Kit will fit the older 1300 Valve Body. The new trim kit does come with the RP46074 valve cartridge assembly. This cartridge will not fit the older 1300 valve body. The original RP19804 valve cartridge assembly will need to be used with the new trim kit. Best Regards, Rosanna

Thank you for your question, Tom1948! I apologize for the confusion and inconvenience this may have caused, however 13/14 series Monitor shower utilizes a pressure balance spool which works with both the hot and cold influx of water. The pressure balance spool inside the valve cartridge, requires both hot and cold water in order to operate correctly and will not work with only one side turned on. Best regards, Edward

Hello! The only difference is the handle styles. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Lisa, Thank you for your question. You have a 1600 series tub/shower. Unfortunately, this trim will not work with your valve. To use a current trim kit, you would need to install an R10000 rough-in valve. However, you may replace the trim parts individually with the parts listed below: RP7577 escutcheon: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP7577 RP6081 sleeve: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP6081 RP196 screws: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP196 RP6079 bonnet: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP6079 The handle may be replaced with the H71 knob or any H7_ lever handle, such as H79. https://www.deltafaucet.com/search-results?searchTerm=H71%2C+H79 Best regards, Jon

Hello Helo, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Classic Monitor® 13 Series Valve Only Trim In Chrome is compatible with Delta Faucet MultiChoice® Universal Tub / Shower Rough - Universal Inlets / Outlets MODEL#: R10000-UNBX. Thank you for being a loyal Delta customer. Please contact us back with any further questions. Best Regards, Themar

Hello Haxton3, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model T13020-SS Monitor® 13 Series Valve Only Trim handle does not move in and out to adjust the water flow. Both the flow and temperature are controlled by rotating the single lever handle counterclockwise. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Bdoc, Thanks so much for contacting Delta Faucet Company! The T13020-SS is not manufactured in Matte Black, I have included a link below to our current Matte Black trim kits. https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?cgid2=Delta_Bathroom_Showering_Tub-and-Shower-Faucets&prefn1=clearance&prefv1=false&prefn2=finish&prefv2=Matte_Black&prefn3=narrowResults&prefv3=hideDiscontinued&prefn4=recertified&prefv4=false Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Desi, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model T13020-SS Classic Monitor® 13 Series Valve Only Trim In Stainless handle controls both the temperature and volume of the water being dispersed. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Francis, Thanks so much for contacting Delta Faucet Company about, T13020-SS! Leaking is caused by debris not allowing the cartridge to seal properly, I have included flushing instructions below, If leaking persists, the RP4993 would need replaced. https://support.deltafaucet.com/s/article/Flushing-a-Tub-Shower-Valve Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Rob7, Thanks so much for contacting Delta Faucet Company! The RP26865 set screw size is #10-32 X .5". Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello! Thank you for contacting Delta Faucet Company! Our T13020 is available in our Stainless Steel, and Chrome finishes only. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Mr. Tom, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet T13020-SS has a variety of different showerheads and tub spouts. Please see the parts breakdown in the link below. https://media.deltafaucet.com/PartsDiagram/DPD-B-T13020%20Rev%20B.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hi drivetrainor, Thanks so much for contacting Delta Faucet Company! The 1300/1400 shower trim pre-2006 would use the RP19804 cartridge, i have included the link below. https://www.deltafaucet.com/parts/product/RP19804.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Thank you for your question, Dann! You can increase the maximum temperature by adjusting the Rotational Limit Stop. Please refer to page 7 of the Installation Instructions for help with this. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best Regards, Benjamin

Hi TomW, Thanks so much for contacting Delta Faucet Company about T13020! The trim kit comes with everything needed for installation except, our universal rough valve. https://www.deltafaucet.com/bathroom/product/R10000-UNWS.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Steve, Thank you for your question about the Delta Faucet model T13020 Classic Monitor® 13 Series Valve Only Trim In Chrome. I am sorry this information was not readily available, and I am happy to help! The model BT13010 is very similar, using the same mixing cartridge they function the same. The difference between the models is the handle shape. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Harmony, Thanks so much for contacting Delta Faucet Company! The CLASSIC Monitor® 13 Series Valve Only Trim MODEL#: T13020 uses a 1/8" Allen wrench to remove the set screw from the handle. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Daniella, Thank you for your question. We apologize for the difficulty installing your handle. We are happy to help! The Delta T13020 valve trim includes handle RP48717 and set screw RP26865. The set screw is size 1/4"-28 x .375 and uses a 3/32" Allen wrench. Best regards, Bryan

Hi Nell, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Our Delta Faucet DELTA® Classic Monitor® 13 Series Valve Only Trim In Chrome MODEL#: T13020 hot water turns on when you turn the handle counterclockwise towards the left Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hello, Johnny! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Classic Monitor® 13 Series Valve Only Trim In Chrome MODEL#: T13020 set screw is RP26865, the size is #10-32 X .5". Here is the link below to the parts break down in the link below. The cartridge is RP46074. https://media.deltafaucet.com/PartsDiagram/DPD-B-T13020%20Rev%20B.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Red26, Thank you for your question about the Delta Faucet model T13020 . A drip is typically caused by wear or damage to the rubber seats. Replacing RP4993 in the legs of the cartridge should fix the drip. If it remains, we recommend replacing the RP46074 cartridge. See more information here: https://support.deltafaucet.com/s/article/My-1300-1400-Series-Monitor-is-leaking-from-the-shower-head-or-spout-What-do-I-need-1628028367129 Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello, David! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Classic Monitor® 13 Series Valve Only Trim In Chrome MODEL#: T13020 cartridge rotational limit stop would need to be adjusted. Here is the link to the Maintenance and Installation sheet the information is on page 9. https://media.deltafaucet.com/MandI/107528%20Rev%20D.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Eddie123, Thanks for your question regarding T13020! Our Delta Faucet shower units require a Delta Faucet rough-in valve. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist