Monitor 17 Series Valve Trim Only in Chrome

Hi Valued Customer, Thank you for your question regarding our Delta Faucet T17033. The first position allows the LEAST amount of hot water to mix with the cold water in the system. In the first position, the water will be the coldest possible when the handle is turned all the way to hot. As you move the rotational limit stop counterclockwise, you progressively add more and more hot water in the mix. The last position to the left will result in the greatest amount of hot water to the mix, and the greatest risk of scald injury if someone accidentally turns the valve handle all the way to the hot side while showering or filling a tub. To adjust the temperature of the water coming out of the valve, pull the disc back to a position where it is possible to remove the rotational limit stop and readjust the teeth engagement position to the desired temperature. Clockwise will decrease the outlet temperature, counterclockwise will increase the outlet temperature. Temperature change per tooth (notch) could be 4° - 16°F based on inlet water conditions. Repeat as necessary. Push disc until fully seated. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Alan, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! Once the set screw is loosened, the handle will pull off the cover. The cover is unscrewed to access the adapter and another screw. See figure C-3 on page 11 of the installation manual. https://media.deltafaucet.com/MandI/107529%20Rev%20F.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Mr Doc, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our Delta Faucet Kayra™ Monitor 17 Series Valve Trim Only In Chrome MODEL#: T17033, and I am happy to help you! Faucets that have the “Only at Delta Trade” banner indicate that the faucet is exclusively sold at Delta Trade and cannot be ordered from a general retailer. These would include Impression Showrooms and Wholesalers. You will want to check the Where To Buy section on the website for locations near you. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Ffjj0270, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Kayra™ Monitor 17 Series Valve Trim Only In Chrome MODEL#: T17033 can not be used as a diverter it controls the volume and temperature. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hi Valued Customer, Our Delta product is a mixture of metallic and non-metallic material, Quality is very important to us, and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello rosie, Thank you for contacting us, I would be happy to help you. The escutcheon plate for model T17033-BL is 6 5/8" (162 mm) Dia Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello Help, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet KAYRA™ Kayra™ Monitor 17 Series Valve Trim Only In Matte Black MODEL#: T17033-BL accepts the R10000-UNBX rough valve, please see the link below. https://www.deltafaucet.com/bathroom/product/R10000-UNBX.html Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hello Jean, Thank you for your question about the Delta Faucet model T17033-SS KAYRA™ Monitor 17 Series Valve Trim Only. I apologize for any difficulty finding this information. We are happy to help! The stainless finish is a brushed, neutral, low-gloss finish. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan