Single Handle Pull-Down Bar / Prep Faucet in Matte Black

Model#: 9913-BL-DST
Single Handle Pull-Down Bar / Prep Faucet in Matte Black
Model#: 9913-BL-DST
List Price: $52800
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14.5
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Great quality bar faucet. Quality product. Looked in the local Home Centers but they seem to go for style & price, not quality. Installation was simple and everything I needed was in the box.
Date published: 2026-07-15
Rated 4 out of 5 by from Attractive faucet but with some concerns Bought this faucet to go with our new Blanco Diamond White sink. Attractive faucet with excellent spout reach. Functionally it works very well but I am surprised the water volume is not a bit more robust. Also, I am surprised that to make the hose connection between the supply and faucet requires an extra (supplied) retainer clip rather than having secure connections at the onset. I've never seen this before and in reviews I have read elsewhere, say the retainer clip can pop off on its own which is very concerning. I hope that does not happen. Finally, the installation instructions (and I have seen many in my lifetime) could have been way better.
Date published: 2026-06-29
Rated 5 out of 5 by from Worked Well The perfect replacement for our kitchen faucet
Date published: 2026-04-14
Rated 5 out of 5 by from Happy with this purchase. So far so good. only been using it for a couple weeks now, but so far it's been great. Went from a two handle to a single handle and the operation of this Faucet is very easy to use. Seems very well made & looks great. A friend installed it for me, which he said was an easy installation.
Date published: 2026-02-25
Rated 5 out of 5 by from Looks and functions as advertised. Love the look of the faucet as well as the function. Works very well and would buy again.
Date published: 2025-12-03
Rated 5 out of 5 by from Looks great! The kitchen faucet looks great an functions as it should. No complaints.
Date published: 2025-11-25
Rated 5 out of 5 by from Kitchen faucet Nice height. Like the lookThe only thing is one has to watch to move it all the way to the top to fully close. Other than that, it works good
Date published: 2025-11-22
Rated 5 out of 5 by from Best design and instant upgrade to your kitchen. Beautiful design. Instant upgrade to the look of my kitchen. Easy to clean. Delivers a steady stream of water. The pull down is a great feature which allows clean up to be a breeze. The controls are easy to manage. I also bought the soap dispenser which adds to the design. It was installed by my plumber who highly recommended Artic Steel due to its beauty and smug proof design. I am so pleased with this faucet. I needed to replace my Delta faucet after 20 years it was time for it to retire.
Date published: 2025-11-19
  • y_2026, m_7, d_24, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_293
  • loc_en_US, sid_9913-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

how long is the lever to turn on the water of the Delta Essa faucet?

Asked by: Desmond

I have the Essa 9113-DST and the aerator is clogged. I have tried soaking it in vinegar, CLR, and nothing seems to clean out the sand like stuff clogging it. Can I just buy an aerator? Everything else is working fine. Thank you

Asked by: Gladiator14
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for pre sale or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2026-01-06

How much clearance do I need between the mixer handle and the backsplash? Does a 10.5 inch plate come with the product?

Asked by: Steve
Hi Valued Customer, Thank you for your question regarding our Delta Faucet 9113-DST. The min. 1 1/2" (38 mm) Clearance to back splash. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 pm., and Saturdays from 9 a.m. to 6 p.m. EST. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-05-24

If the faucet is turned off while in spray mode will it still be in spray mode when turned back on, or will it revert back to stream mode?

Asked by: zrice
Hi zrice, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Single Handle Pull-Down Kitchen Faucet In Arctic Stainless MODEL#: 9113-AR-DST has 3 button spray wand, I have listed the button settings below. Button 1 - Standard Flow Aerator Button 2 - 1.5 GPM at 60 psi Maximum Aerator Button 3 - Spray Mode Note - 3 Function Sprayer returns to position 2 if left in position 1 when the water is turned off. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

If the essa kitchen faucet has plastic hoses is it possible to upgrade to braided stainless hoses? Can you help me understand about the rusting issues? Thanks

Asked by: Peggy
Hi Peggy, Thank you for contacting Delta Faucet Company! Our Essa, 9113-AR-DST faucet has PEX tubing and it cannot be changed. We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-02-16

We have a Essa Faucet like this one and the sprayer quite working. What do we need to do to replace the head.

Asked by: Craig
Hi Craig, Thank you for your question about the Delta Faucet model 9913-DST. We are happy to help! I first recommend soaking the sprayer in 50/50 white vinegar and water, then rinsing. If the issue remains, a replacement sprayer is available as RP80524. https://www.deltafaucet.com/parts/product/RP80524.html Please contact us directly for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

When the handle is fully open to the back, what is the total distance from the spout center? I need to get the measurements exactly because of our backsplash behind the sink. I have looked at the specs, but still can't tell for sure.

Asked by: Joanne
Hi Joanne, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Essa® Single Handle Pull-Down Kitchen Faucet In Arctic Stainless MODEL#: 9113-AR-DST handle tilts out for on and cold, then pulls forward for hot. This faucet requires a minimum of 1 1/2" Clearance from the faucet to the backsplash. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

The trigger on the spray head of my 9113-AR-DST faucet does not function properly. There is no clicking sound when trigger is depressed and it doesn't switch from spray to regular. Can I replace the trigger or spray head?

Asked by: Ed G
Hi Ed G, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Single Handle Pull-Down Kitchen Faucet In Arctic Stainless MODEL#: 9113-AR-DST wand assembly can be replaced, it is part number RP80524. We do recommend soaking the wand in a 50/50 solution of white vinegar and water, due to build up or debris, it can cause the button to stick or not switch settings easily. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

Replacing sink and want to no longer use the optional 3 hole mounting hardware. I want to install the faucet to single hole. What part is needed to install the faucet as a single hole? Is there a gasket and a mount plate I can purchase from you?

Asked by: Mike
Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! The RP70714 will allow you to install the faucet over 3 holes. It can be purchased on our website at the following link. Please reach out directly with further questions. Best Regards, Kayla https://www.deltafaucet.com/parts/product/RP70714.html
Answered by: Customer Service
Date published: 2024-03-28

Does the Essa Single Handle Pull-Down Kitchen Faucet come in brushed nickel or anything but chrome?

Asked by: John
Hi John, Thank you for contacting Delta Faucet Company! Our Essa 9113-DST is available in our Chrome, Arctic Stainless, Champagne Bronze, Matte Black, and Venetian Bronze. To see this model in the other finishes, please refer to 'Standard Finishes' in the link below. Click on the specific finish you would like to see. You can also go to your local showroom to see the faucet and color rings in person. https://www.deltafaucet.com/kitchen/product/9113-DST.html To find a local showroom: https://www.deltafaucet.com/where-to-buy We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-02-20

With this faucet, is the handle down to use hot water and up to use cold? The little C on the dial shows when our handle is down but hot water comes out. When the H is showing, the handle is up and cold water runs. Is this the way it is supposed to be?

Asked by: Janice

What is the item # for deck/face place for the 9913 AR DST and where can I get it?

Asked by: Linda
Thank you for your question, Linda! The part number for the escutcheon plate on model 9913-AR-DST is RP70714AR. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP70714AR Best Regards, Benjamin
Answered by: Benjamin
Date published: 2024-03-28

Is this the same as essa-BL-DST bronze and is there a soap dispenser that matches?

Asked by: AmyS
Hello AmyS, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet ESSA® Essa® Single Handle Pull-Down Kitchen Faucet In Venetian Bronze MODEL#: 9113-RB-DST is the same faucet as the 9113-BL-DST, the only difference is the finish. Also, we would recommend the RP700736RB soap dispenser to match. Please see the link below. https://www.deltafaucet.com/bathroom/product/RP100736RB.html Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Looking for a Delta faucet 9913-DST-AR. Also, what does DST mean? What does AR mean?

Asked by: Letsgobrandon
Hello Customer! Thank you for your question and we are happy to help. The Delta Essa® Single Handle Pull-Down Bar / Prep Faucet In Arctic Stainless MODEL#: 9913-AR-DST "AR" indicates the Arctic Stainless finish and the "DST" indicates that it is a Diamond Seal Technology faucet. With any further questions or concerns, please do not hesitate to reach out to us again. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Carrie
Date published: 2024-03-28

Is there a serviceable part in the faucet that can be replaced that would affect cold water flow only? It seems my supply lines have good pressure, but the cold water flow is very light. The warm water does not seem to be affected. Thanks

Asked by: Barry
Hello! Thank you for contacting Delta Faucet Company! Please refer to the information below to flush your faucet. Please also keep a close eye on the flow coming out of each point you flush and if it is low please reply to this e-mail. Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2026-02-13

Regarding the 9913-BL-DST Essa Pull Down Bar Faucet. Is there a kit available to convert this faucet to touch sensor?

Asked by: David T
Hello David T, Thank you for your question! I am happy to help you! Our Delta Faucet ESSA® Single Handle Pull-Down Bar / Prep Faucet MODEL#: 9913-AR-DST can be upgraded to the touch faucet by purchasing the necessary parts, I have added a list of parts and the link to the parts diagram below. RP92714 EP92546 RP92543 RP78741 https://media.deltafaucet.com/PartsDiagram/DPD-K-9113T-DST.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Is there an anti-scald adjustment and how is it done?

Asked by: Jeff
Hi Jeff, Thank you for your question regarding our Delta Faucet 9913-DST. This cartridge is not adjustable and does not actually control the temperature coming into the faucet but rather simply controls the amount of hot and cold water allowed to mix in the valve. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

I have the 9113-AR-DST faucet. How can I move the on/off handle from the right side to the front like this picture 

Asked by: Essa faucet handle change
Hi Essa faucet handle change, Thank you for your question about the Delta Faucet 9113-AR-DST. The spout swivels 360 degrees, so for a single-hole installation, the faucet hub can be turned to have the handle on the front. If the optional 3-hole escutcheon is used, unfortunately, the faucet hub would not fit on the escutcheon tabs with the handle in front. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-05-06

Is there a way to fix a sprayer head that constantly sets itself in between stream and spray? This faucet has been an issue since we installed.

Asked by: poschspice
Hi, poschspice! Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. Our Delta Faucet Essa® Single Handle Pull-Down Kitchen Faucet In Chrome MODEL#: 9113-DST with a 3 function sprayer returns to position 2 if left in position 1 when the water is turned off. While ShieldSpray® Models return to position 3 when button 1 is released. Please refer to the maintenance and installation guide for more details, I have attached the link below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Kelley
Answered by: Customer Service
Date published: 2024-03-28

What is the different between Arctic stainless and Chrome. Are they both spot free?

Asked by: Kathy
Hi Kathy, Thanks for your question regarding 9913-DST! Arctic Stainless is a glossy finish with icy tones. Chrome is cool, high-gloss finish. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-19

Does the spray setting on 9113-DST remain on, even after the water is turned off and then on?

Asked by: Bill

Can I replace the 9113 DST head with another head that I can clean the aerator?

Asked by: Chrys
Hi Chrys! Thank you for your question and we are happy to help. The Delta 9113-DST spray head can only use the RP80524 and the aerator cannot be removed. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2023-03-06

We had to reinstall and we are missing the clip that connects the hose from the faucet and the pull out spray that keeps them from separating. How do I get this part? Thank you

Asked by: Cottage Kitchen
Hi Cottage Kitchen, Thanks for your question regarding 9113-BL-DST! You can purchase RP60911 online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy https://media.deltafaucet.com/PartsDiagram/DPD-K-9113-DST%20Rev%20E.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Purchased the 9113-RB-DST Faucet Using the "single hole" installation.  I feel it needs a "trim ring" that the sits on the sink counter and underneath the faucet itself.  Is one available for this model?  Needs the support and appearance is not the best.

Asked by: Jim A
Hello Jim A, Thank you for your question. We are happy to help! The Delta 9113-RB-DST faucet does not include a trim ring for single hole installation. We recommend RP37490 thin deck aid to provide stiffness to thin gauge sinks if the faucet needs additional support. Please reach out directly if you have any questions or need additional assistance with the faucet installation. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

My faucet it’s being use only for 8 months and the handle fell, I put it back but keep falling. 

Asked by: VPM1
Hi VPM1, Thanks so much for contacting Delta Faucet Company regarding 9113-BL-DST! The set screw for this handle is RP72998 and has a thread count of #8-32x.43. Please contact us directly if you have any questions or need additional assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Water start/stop by touch previously worked on all faucet parts but recently will not work on top piece (curved head).  Why will touch feature work for base/handle but not top?

Asked by: JimJ
Hi Valued Customer, Thank you for your question. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-11-12

Does this faucet come with soap dispenser? Or any extras, as I have three holes to fill. Thanks

Asked by: Pamela
Thank you for your question, Pamela! No, model 9113-DST does not come included with a soap dispenser. However, the RP100736 soap dispenser is the recommended match for model 9113-DST. That soap dispenser would need to be purchased separately. https://media.deltafaucet.com/PartsDiagram/DPD-K-9113-DST.pdf Best Regards, Benjamin
Answered by: Benjamin
Date published: 2024-03-28

Should the hot water turn on when the handle is turned towards you or away from you? Also does the handle only move 25% of the circle? Thank you.

Asked by: jim62
Hello jim62, Thank you for your question! I am happy to help you! Our Delta 9113-DST handle would pull towards you for hot water, and the handle only tilts out for on and cold then moves forward for hot. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Can I replace a pex line? I cut the cold water one by accident

Asked by: Darin
Hi Darin, Thanks so much for contacting Delta Faucet Company! No, the ESSA® Pull-Down Kitchen Faucet MODEL#: 9113-AR-DST PEX supply lines cannot be replaced. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-07

How do you get faucet working after you’ve changed dead batteries?

Asked by: PalHal
Hi Big Daddy, thank you for your interest in the 9113-AR-DST! Our Delta Faucet takes two types of batteries; we would like you to try energizer or name brand (non-Bulk) battery replacements. Another option would be C cell batteries; this can be done by removing the internal battery holder. Another step would be removing the battery box from the battery wire, waiting a full minute, inserting brand-new batteries into the battery box, and then reconnecting the battery box to the battery box wire. Allowing the full minute without the battery box connected will allow time for any remaining electricity in the solenoid to drain, resetting it. We have reached out to you directly via email in regards to this matter also. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_7, d_25, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_7, bvpage2n
  • co_hasquestionsanswers, tq_383
  • loc_en_US, sid_9913-BL-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 53ms
  • questions, product
PART LIST

PART LIST

Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP80525

Essa®

Essa® Metal Lever Handle Kit

List Price: $60.75 - $98.45
Free Ground Shipping All Orders $49+

RP80525

Image-Master-RP70714

Essa®

Essa® Escutcheon w/ Baseplate & Nuts

List Price: $62.65 - $113.15
Free Ground Shipping All Orders $49+

RP70714

Image-Master-RP80524

Essa®

Essa® Spray Assembly - Pull-Down

List Price: $82.40 - $115.30
Free Ground Shipping All Orders $49+

RP80524

Image-RP80528

Delta®

Delta® Gasket

List Price: $20.90
Online Price: $16.72
Free Ground Shipping All Orders $49+

RP80528

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-Master-RP80520

Essa®

Essa® Spout Assembly - Kitchen

List Price: $115.30 - $167.80
Free Ground Shipping All Orders $49+

RP80520

Image-RP80523

Delta®

Delta® Hose Weight Assembly

List Price: $53.40
Online Price: $42.72
Free Ground Shipping All Orders $49+

RP80523

Image-RP47888

Allora®

Allora® Soap / Lotion Dispenser - Body Assembly

List Price: $16.60
Online Price: $13.28
Free Ground Shipping All Orders $49+

RP47888

4.06 18
Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP80522

Delta®

Delta® Hose Assembly

List Price: $91.00
Online Price: $72.80
Free Ground Shipping All Orders $49+

RP80522

5.00 1
Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.