Monitor 14 Series Tub & Shower Trim in Chrome

Hello! Yes, this trim kit will work with your existing RP19804 cartridge. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Peter, Thanks so much for contacting Delta Faucet Company! The MultiChoice® Universal Tub / Shower Rough MODEL#: R10000-UNWS has spots and can use PEX everywhere but the tub spout. The spout has to use copper or galvanized pipes. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Craig, Thanks for your question regarding T14459-PP! You will need to update your Rough-In Valve in the wall to upgrade to a one-handle trim kit. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Shrikant, Thank you for your question about the Delta Faucet model T14459-SS-PP. Unfortunately, this does not include an RP19804 cartridge. If needed, it can be purchased separately. I apologize for the inconvenience this causes. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Amy007, thank you for contacting Delta Faucet Company! To replace your cartridge assembly, please refer to the instructions below. Please shut your water supplies off and gather 1/8" allen wrench and a strap wrench. Please place a washcloth over the drain so you do not lose any small parts. 1. Remove your handle with your 1/8" allen wrench. There is a button on the outside of the handle. 2. Pull the sleeve assembly off of the valve. This is the cylindrical part behind your handle that hides the valve body. 3. You should see a brass valve and a silver bonnet nut. Use your strap wrench to remove the bonnet nut. 4. Pull the cartridge out of the valve. 5. We recommend flushing the valve before installing a new cartridge. Please follow the instructions below to flush your shower valve. Flushing: 1. Since you have your valve open with your water shut off, please secure the parts you removed from your shower. 2. Close the shower door or the curtain, and turn the water back on for about a minute. **Please note, that the hot and cold water will come out of this valve, the hot water is the same temperature as your water heater.** 3. Shut the water off and look for the etched "H" on the cartridge. 4. Please install the cartridge with the "H" facing the left side. 5. You will need to rotate your rotational limit stop. Please refer to page 9, with a #4 in a black box, to adjust to your preferred temperature. https://media.deltafaucet.com/MandI/107528%20Rev%20D.pdf We appreciate your inquiry. Please contact us directly if you need further assistance! Best Regards, Kyra Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet T14459-PP. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Nick, Thanks so much for contacting Delta Faucet Company about, T14059-BL-PP! The button can be removed by using a small tipped nail file, toothpick, or your fingernail. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Karina, thank you for your interest in the T14059-PP! The trim does not control volume of water or temperature. We do offer our Trinsic trim that controls temperature. Please view the link below. https://www.deltafaucet.com/bathroom/product/T17059.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist