Single Handle Kitchen Faucet with Spray in Chrome

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Molly, Thank you for your question! The set screw for the 10901LF single handle kitchen faucet is only available with the RP70834 handle kit. Best regards, Brandis

Hi, Mark! Thank you for your question. The seats and springs for the Delta 10901LF faucet can be removed by scooping them out with the end of a small Allen wrench. Place the end of the Allen wrench into the middle of the seats and springs and 'scoop' them out of the valve body. Best Regards, Rosanna

Thank you for your inquiry, John! To replace the diverter assembly in the Delta Foundations Kitchen 10901LF faucet, please follow directions below. First SHUT OFF THE WATER supply to the faucet. 1. Remove the handle. On the lever handle, you should find a small hex screw that can be loosened with a 1/8" Allen wrench. The handle will lift off when this screw is loose enough. 2. Once the handle has been removed, unscrew the dome-shaped cap counter clockwise. 3. Once the cap has been removed, grasp the round metal stem (which is part of the ball assembly) to which the handle was attached and pull it out. The ball will come out, along with the cam and packing. You will need to reinstall these parts later, so be sure to note how they are positioned in the valve. 4. Grab the spout, wiggle it as you pull up on it and take it off the valve. 5. The diverter is the white and brass "button" in the center of the valve. Gently grip it and pull it straight out. You can also pry the diverter out of the valve body by inserting a small screwdriver into the hole directly above the diverter and pushing it out. Be sure to remove any debris that may be in the hole that the diverter fits into. 6. Press the new diverter into place and reinstall the other components in the reverse order. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hi, Mark! Thank you for your question. To remove the spout for the Delta 10901LF faucet, you will want to first, remove the handle and unscrew the bonnet nut. The spout will usually come straight off. Very occasionally, you may have to twist left to right and pull up to remove the spout if it is not coming straight off. Best Regards, Rosanna

Hello Richard, Thank you for your question. There are slight differences between Delta Faucet models 10901LF and B4410LF, the main one is the handle assembly. Best regards, Tanya

Hi Curly, Thank you for your question. To remove the sprayer connection squeeze the top part of the 2 tabs on the sides of the block connector. Push up slightly and pull down to remove. Thanks, Dave

Hi, NotAPlumber! Thank you for your question. The Delta 10901LF Faucet has a 15/16"-27 thread size aerator. Unfortunately, we do not make dishwasher adapters. We recommend to check with the dishwasher manufacturer for the correct aerator adapter. Best Regards, Rosanna