Single Handle Pull-Down Kitchen Faucet in Arctic Stainless

Model#: 9113-AR-DST
Single Handle Pull-Down Kitchen Faucet in Arctic Stainless
Model#: 9113-AR-DST
List Price: $51300
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
15-1/4
Valve Type:
Euromotion DIAMOND(TM) Valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Satisfied A must if you're in the market for an update without changing out the old stainless steel sink
Date published: 2026-04-25
Rated 5 out of 5 by from Sink for laundry room. Worked great for my space. Great quality.
Date published: 2026-04-14
Rated 5 out of 5 by from Excellent faucet choice I wasn't sure how I would like this faucet but I am very pleased with the size and the features. I really like the positioning of the cold water - it is logical in the way that it operates. The pulldown faucet works well and there isn't too much splash in the sink.
Date published: 2026-04-10
Rated 5 out of 5 by from The New Faucet is Great So far, so good. It replaced a faucet from Costco.
Date published: 2026-04-07
Rated 5 out of 5 by from Great Purchase The faucet is lovely. Delta products are well made, functional and beautiful
Date published: 2026-03-29
Rated 5 out of 5 by from Spout shout out Very pleased with the new faucet. Both attractive and highly functional.
Date published: 2026-03-26
Rated 5 out of 5 by from Happy customer Looks and works good and easy installation also customer service is great. It came with cracked electronic base contacted customer service and they sent me a new base.
Date published: 2026-03-18
Rated 5 out of 5 by from Good value Good value functions well
Date published: 2026-03-02
  • y_2026, m_6, d_9, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_597
  • loc_en_US, sid_9113-AR-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

What is the hose length?

Asked by: Teddy
Hi, Teddy! Thank you for your question. The hose assembly, RP80522, that is included with the Delta 9113-AR-DST Faucet is 62". Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Was this faucet made in America?

Asked by: American
Hi American, Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. For more information, please click the link below. https://www.deltafaucet.com/company/buy-american Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-02-10

Is there a way to reduce the water pressure after this is installed? Add an aerator or pressure regulator?

My children turn it on full power and they make a mess. I was hoping to reduce the pressure a bit.
Asked by: TLG
Hi TLG, Thank you for your question. This faucet has a flow rate of 1.8 GPM. The RP61607 adapter will reduce the flow rate to 1.5 GPM. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP61607 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-08-20

I have a 9113T-AR-DST. Can I replace the spray head with a Cassidy ShowerShield head? If yes, Where can I get one?

Asked by: BernieP
Hi, Bernie P. Thank you for your question. Unfortunately, the Cassidy SprayShield spray assembly will not fit the Delta Essa 9113-AR-DST faucet. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What size hole to cut in Quartz Countertop for Delta 9113 faucet (1 hole installation)?

Asked by: Remodeler Quartz
Thank you for your question, Remodeler Quartz! The measurements needed to install this model can be found on the Technical Specifications Sheet below. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20B.pdf Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

Current faucet has a 10" base plate, will this cover it?

Hello. My current faucet has a 10" base plate (not sure the name of this piece) across the top of the sink - the flat piece that mounts over the sink and creates a base to hold the faucet. Will this one cover it? I only see a measurement of 8" and I'm concerned there will be a gap. Thanks
Asked by: JaneOfAllTradesButNotAPlumber
Hi, Jane! Thank you for your question. The 9113-AR-DST faucet does have it's own escutcheon plate. The escutcheon plate is RP70714AR. This is 10 1/2" long. Here is a link to the unit on our website: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP70714AR Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

How does the handle control temperature and pressure?

Does pushing the handle toward the vertical make the water cold or hot? If the water is turned off, does the temperature setting remain - so that one can turn it back on at the same temperature "setting"?
Asked by: Roy
Temperture is mixed through handle control from vertical (cold) (to Hot) in full down or horizontal position. The pressure is always constant but the flow of water is controlled through the movement of handle in and out. It is linear as you move through hot to cold without any noticeable increase of water flow at the half way point. With handle in full open position the flow rate is fixed at 1.2gpm. but the pressure is always the same which is set at the local water pumping station into your home. Usually 60-80 psi
Answered by: Jim36548
Date published: 2024-03-28

I want to install this faucet under my wall cabinets that have an 18" clearance from top of counter top to bottom of wall cabinet. Since faucet is just under 16", will I really be able to maneuver this faucet or will it be too tall for the space?

Asked by: Maddie
Hello Maddie, Thank you for your question. The Delta Essa Kitchen Pull-Down 9113-AR-DST faucet has a total height of 15 3/4" (400 mm) and a requires a minimum 1 1/2" (38 mm) clearance to the back splash. This should work for an 18" installation. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Which soap dispenser matches this model? Thank you.

Asked by: lpkara
Hello lpkara, Thank you for your question regarding the Delta Essa Single Handle Pull-Down Kitchen Faucet and I am happy to help you today. We currently manufacture 9 soap dispensers in the Arctic Stainless finish at this time, although there isn't a specific model that we pair with this faucet in particular. To view all of our available available models, please visit the link below: https://www.deltafaucet.com/search-results?searchTerm=Arctic+Stainless+Soap+Dispenser Any of these models would pair nicely with the Essa faucet. Please feel free to give us a call if we can assist you with anything going forward at 800-345-3358. Thank you, Brandy
Answered by: Brandy
Date published: 2024-03-28

Is the hose compatible with New Zealand Standard? If not, would i be able to get compatible hoses for this faucet? thanks

Asked by: Mauricio
Hello Mauricio, Thank you for your inquiry! The Delta Essa Pull-Down Kitchen 9113-DST faucet come with only the RP80522 hose and clip assembly. There are no other pull-Out hose assemblies made for this unit. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Is the 9113 DST model the same in a big box store and a plumbing supply store? Are there differences in the materials used in the manufacturing?

Asked by: Gail
Hi Gail, Thank you for your question! When comparing the same model, all faucets will be the exact same, regardless of where they are sold. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-24

Do you have to hold the button to make it spray or can you just push it to the spray mode and it will stay like that until you press it again.  This question is for the Essa and Leland models. 

Asked by: Donna
Thank you for your inquiry, Donna! The button on the wand/sprayer assembly of the Delta Essa and Leland Pull-Down kitchen faucets remain in set mode (stream or spray) until it is pressed into the other mode. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Can the aerator on this faucet be changed? Using this faucet with a point of use water heater which only works at a flow rate of 0.5 GPM. A flow restricting aerator is provided with the unit.

Asked by: schillingtm
Hi, schillingtm! Thank you for your question. The 9113T-DST sprayer assembly should have a 1.8 gpm flow rate. If you are getting 0.5 gpm, we recommend to clean the sprayer by soaking this in a solution of 50% white vinegar and 50% water solution. You may soak for an hour or even overnight to clean. If this does not fix the issue, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

What does spout length mean? Also, how long is the hose for pull out?

Asked by: Lynn
Hello Lynn, Thank you for your inquiry! The Delta Essa Kitchen 9113-DST faucet has a spout length/extension of 9-1/4". The hose is 62". Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

does the Delta 9113-DST have a temperature inhibitor?

Asked by: Michael
Hi Michael, Thank you for your question. The Delta Essa Pull-Down Kitchen 9113-DST faucet is not designed with a temperature indicator. This unit does have a hot and indicator on the handle. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

How do you remove the spray head from this faucet?

Asked by: Piasano
Hello, Thank you for your question! You will press a small button on the connector between the hose and wand which will then allow you to turn the wand counterclockwise until it fully unthreads from the hose. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-08-06

does it have a stainless disk/washer rather than ceramic?

Heard ceramic gives out, newer stainless is better?
Asked by: Barbara
Hi Barbara, Thank you for your question! The RP73000 cartridge for the 9113-DST is a ceramic euro motion cartridge. Rather the unit has a ceramic cartridge or not it is built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

My installation is through a quartz countertop through an access hole in the undermount sink. How do I ensure the faucet nut being tightened?

The faucet is the Delta Essa 9113-DST. The countertop is 3cm, quartz and the sink is a Kohler 5818-5U Hartland. Will the nut fit through the sink access hole and sit flush against the countertop underside? Will I be able to tightened the nut using standard tools? There won't be enough room to use a sink wrench. Thank you.
Asked by: Living With Interest
Hi Living with interest, Thank you for your question! The maximum deck thickness for the 9113-DST is 2 1/2". There is no extension kit or different wrench available. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Handle is loose on side of faucet. How do you tighten the handle?

Asked by: Jack
Hi, Jack. Thank you for your question. The set screw on the handle for the Delta 9913-AR-DST Faucet can be tightened with a 3/32" Allen Wrench. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

When will the Delta Essa Touch 2.0 kitchen faucet with touchless technology be available?

Asked by: Rob F
I am in Florida and bought the faucet at Home Depot. CAN I get the part from them?
Answered by: Marcel
Date published: 2026-01-03

How long is the pull-out hose?

Asked by: PebbleStone
Hi PebbleStone, Thank you for your question. The length of the pull-out hose is 54". Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2024-03-28

Is there any way to increase the flow rate? Perhaps a head with a less restrictive head.

Asked by: Greg51
Hi, Greg51! Thank you for your question. The Delta 9113-DST Faucet has a flow rate of 1.80 gpm @ 60 psi. The unit is WaterSense® Labeled. WaterSense® labeled faucets use at least 20% less water than the industry standard—saving you money without compromising performance. At this time, we do not have a different sprayer that increases the flow rate for the faucet. If you feel that you are getting less than 1.80 gpm, we would be more than happy to help you with this. Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Hi. I'm trying to remove the aerator. Do you know which aerator wrench can fit in this model?

Asked by: Booboo
Hi, Doti! Thank you for your question. The Delta 9113-DST faucet sprayer assembly was designed with a non-removable aerator. We recommend to remove the whole sprayer, RP80524AR, to clean or replace the aerator. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How do I change the screen for clogs

Asked by: Lisa
Hi, Lisa! Thank you for your question. The aerator assembly for the Delta 9113-DST is non-removable. To clean, we do recommend to remove the sprayer assembly from the hose assembly. Soak the sprayer in a solution of 50% white vinegar and 50% water mix for an hour or even overnight to clean the debris. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what kind of wrench do I need to remove the handle?

Asked by: Rob
Hello Rob, Thank you for your inquiry! You will need a 1/8" allen wrench to remove the set screw in the handle of the Delta Essa Kitchen Pull-Down 9113-DST faucet. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

What material is this made of? Just want to confirm this is not plastic, and it's a sturdy faucet.

Asked by: chavland
Thank you for your question, chavland! The faucet body and spout are brass. The pull-down wand is non-metallic as this helps prevent heat transfer that can result in scalding. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Do you have a care and cleaning sheet? The installers took boxes and everything away with them.

Asked by: Renee Bauernfeind
Hello Renee, Thank you for your inquiry! Here is the cleaning care instructions from the Maintenance/Installation sheet, that comes with the faucet. Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse the surface thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use. Avoid using the following which can damage your finish: Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid products that state on the label that they remove tarnish and rust and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. Avoid harsh abrasives or polishes. Avoid bleach-based cleaners. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

What is the diameter of the base? What is the diameter of the spout tube?

Asked by: colin62
Hi, colln62! Thank you for your question. The Delta 9913-DST faucet base has a diameter of 2 13/32" (61 mm). The diameter of the spout tube is 1.18" (29.972 mm). Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can this faucet be installed on a laminate counter top - or does it need to be installed on a solid surface such as granite or quartz?

Asked by: Mary
Dear Mary, Thank you for your question. The Delta Essa Kitchen faucet can be installed on any standard sink or countertop material with a maximum deck thickness of 2 1/2". Best regards, Tanya
Answered by: Tanya
Date published: 2016-10-17

The base is loose on the marble countertop, causing the handle to rotate when used. What wrench tool can I use to tighten it? I will have to reach it from underneath the sink. I do not have the tightening tool that came with it. Can I use sealant?

Asked by: RobertSF
Thank you for your question, RobertSF! The RP60924 wrench that was included with your model is recommended however an adjustable wrench will also work to tighten the mount nut and bracket below the counter. We do not recommend applying sealant as this could make future repairs difficult. Please contact us directly if you have questions or need further assistance. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP60924 Best regard, Edward
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2026, m_6, d_10, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_403
  • loc_en_US, sid_9113-AR-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 77ms
  • questions, product
PART LIST

PART LIST

Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-Master-RP80525CZ

Essa®

Essa® Handle

List Price: $60.75 - $98.45
Free Ground Shipping All Orders $49+

RP80525CZ

Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-Master-RP80524CZ

Essa®

Essa® Sprayer

List Price: $82.40 - $115.30
Free Ground Shipping All Orders $49+

RP80524CZ

Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP70714

Essa®

Essa® Escutcheon w/ Baseplate & Nuts

List Price: $62.65 - $113.15
Free Ground Shipping All Orders $49+

RP70714

Image-RP80528

Delta®

Delta® Gasket

List Price: $20.90
Online Price: $16.72
Free Ground Shipping All Orders $49+

RP80528

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-Master-RP80520

Essa®

Essa® Spout Assembly - Kitchen

List Price: $115.30 - $167.80
Free Ground Shipping All Orders $49+

RP80520

Image-RP47888

Allora®

Allora® Soap / Lotion Dispenser - Body Assembly

List Price: $16.60
Online Price: $13.28
Free Ground Shipping All Orders $49+

RP47888

4.06 18
Image-RP80523

Delta®

Delta® Hose Weight Assembly

List Price: $53.40
Online Price: $42.72
Free Ground Shipping All Orders $49+

RP80523

Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2
Image-RP80522

Delta®

Delta® Hose Assembly

List Price: $91.00
Online Price: $72.80
Free Ground Shipping All Orders $49+

RP80522

5.00 1
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.