- 1 or 3-hole installation
- Delta MagnaTite Docking holds spray wand firmly in place
- Backed by Delta Faucet's Lifetime Limited Warranty
-
No-Lead Compliant
List Price*:
$352.15
- MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
- Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- 1 or 3-hole 8" installation
- ADA Compliant
- High-arc pull-down swivels 360degrees
DIAMOND™ Seal Technology
Installation Information
1 or 3-hole 8" installation
- Escutcheon: Optional Escutcheon Included
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Spout Height: 15-1/4"
- Spout Length: 9-1/4"
- Fittings Type: 3/8" compression fittings
- Deck Thickness: 2.5"
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: Euromotion DIAMOND™ Valve
Rated 5 out of
5
by
keith from
Delta Essa
Great faucet and works great
Date published: 2018-09-25
Rated 4 out of
5
by
jf from
Great selection for price
I chose Essa in matte black for my kitchen renovation. The fixture has been installed for a month, and so far I have had no issues. The matte black finish looks high-end, and that combined with the Delta functionality made this a good choice for our home.
Date published: 2018-09-11
Rated 2 out of
5
by
Jeremy from
angle of sprayer wayyyyyy to pointed forward!
Like features and look... the angle of the faucet is horrible. if you have a single sink and keep it straight.. it’s shooting atleast 2 inches further forwards then it should. probably not a problem with double sinks that have the faucet turned in either direction.. needs to be adjustable. If u buy this you may need to set the faucet further back if possible.. I wasted my time installing this. Splashes water out non stop.
Date published: 2018-08-23
Rated 5 out of
5
by
moose from
Perfect Addition for Our Recent Kitchen Remodel
So happy with this purchase. I did alot of research on kitchen faucets before I purchased this one. Wanting something that was sleek and not overly modern with simple features. This is just the perfect faucet. Love the sprayer too. I am over the top with this faucet and can not say enough about it.
Date published: 2018-08-08
Rated 5 out of
5
by
Homeowners123 from
Grest features
Perfect size and features
Date published: 2018-08-06
Rated 5 out of
5
by
michael from
easy to use and easy to install
I bought it to replace a kohler kitchen faucet
Date published: 2018-07-24
Rated 5 out of
5
by
lefty from
kitchen sink
Plumber installed this faucet about four weeks ago and we haven't had any problems. I have white cabinets, black counter tops, the faucet is in the island with a white under mount sink and everyone comments on it.
Date published: 2018-06-27
Rated 5 out of
5
by
LaPL from
Great Faucet
Love this faucet. It was easy to install and works great. Really like how Delta stands behind their products.
Date published: 2018-06-26
Is Arctic stainless fingerprint free?
Thank you for your question, jabw! The Arctic Stainless finish is not the same as our SpotShield Stainless finish which does resist water spots and fingerprints. Here is a link with more information on our SpotShield Technology: https://www.deltafaucet.com/design-innovation/innovations/kitchen/spotshield-technology#anchor-products
Best regards, Edward
Date published: 2018-09-29
Can the handle on models 9113-DST ESSA or 9113-AR-DST be changed to the left side. If not are there any similar models with handles that are 2 inches wide?
Hi, Mama!
Thank you for your question. The Delta 9113-DST and 9113-AR-DST faucets can both be installed with the handle on the left side as the spout assembly does turn 360 degrees. Please note, the operation of the handle will be opposite.
Best Regards,
Rosanna
Date published: 2018-09-24
What is the degree/angle of the sprayer? It’s not listed on spec drawing pdf. The stream comes out at a pretty sharp angle projecting water about 2 inches forward by the time it hits the bottom of the sink. Is there a way to adjust more straight?
Hi, Jeremy!
Thank you for your question. The Delta 9113-DST has an approximate angle of 18.3 degrees from the center of the spout to the aerator on the sprayer. There is no adjustment to change the degree of spray. Please make sure to check the level of the basin/countertop is straight. For further assistance, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2018-08-23
Hello, What is the guarantee/warranty on this faucet as far as the finish?
Hi Danise,
Thank you for your question! Our products have a Lifetime Limited Warranty that covers parts and finish to be free of defect in material and workmanship for the original owner/purchaser. You can find out more here:
https://www.deltafaucet.com/service-parts/warranty
Best regards, Jon
Date published: 2018-07-27
Do you have to hold the spray button down while spraying dishes--or just click the spray button once?
Thank you for your question, Betsy! The switch on the wand assembly will toggle between spray and stream, and will stay in the same setting until it is pressed to the other side.
Best regards, Jon
Date published: 2018-07-20
How do you install the cartridge
Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. You will need a 1/8" allen wrench to remove the handle assembly. Please be sure to turn off the water at the shut off valve before removing the handle. You may also need an adjustable wrench to loosen the bonnet nut around the valve cartridge assembly. Once the bonnet nut is removed, the cartridge will slide out. Check the valve body for debris then insert the new cartridge, screw on the bonnet nut and please be sure not to over-tighten the bonnet as we recommend tightening a 1/4 turn to a full turn past finger tight. Then attach the handle with the set screw and this repair is complete. Turn on the shut off valves below the counter slowly and test to make sure the water flows correctly. If you have any questions, please contact us directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com.
Best regards, Edward
Date published: 2018-06-28
Is there a way to increase hot water temperature on the Essa series mixing valve? The kitchen sink water doesnt get hot enough although all other faucets in the house do.
Hello dBee,
Thank you for your question! The Delta Essa Pull-Down Kitchen 9113-DST faucet is not designed with a temperature adjustment on the cartridge assembly for increasing or decreasing the hot or cold water. You may want to flush the hot water supply line and/or supply valve.
Best regards,
Tanya
Date published: 2018-06-18
Is the hose compatible with New Zealand Standard? If not, would i be able to get compatible hoses for this faucet? thanks
Hello Mauricio,
Thank you for your inquiry! The Delta Essa Pull-Down Kitchen 9113-DST faucet come with only the RP80522 hose and clip assembly. There are no other pull-Out hose assemblies made for this unit.
Best regards,
Tanya
Date published: 2018-06-18
Featured Accessories
RELATED PRODUCTS View Collection
