Single Handle Pull-Down Kitchen Faucet in Venetian Bronze

Model#: 9113-RB-DST
Single Handle Pull-Down Kitchen Faucet in Venetian Bronze
Model#: 9113-RB-DST
List Price: $67000
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
  • MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
  • LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 500,000 cycles)
  • LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
  • EASY INSTALLATION OPTIONS: This kitchen sink faucet fits 1 or 3-hole configurations and includes integrated InnoFlex® PEX supply lines for faster installation; optional deck plate included
  • QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
  • ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
  • LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Soap Dispenser
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
15-1/4
Valve Type:
Euromotion DIAMOND(TM) Valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Simple minimal design Very happy with appearance and function. Finish is brush stainless steel and does not show finger prints or water spots. Love the simple clean lines too. Received faucet within 3 days of order. All great
Date published: 2026-09-06
Rated 5 out of 5 by from Delta Looks sleek, Performs well
Date published: 2026-08-31
Rated 5 out of 5 by from Great Faucet Very happy with this choice. Quality!
Date published: 2026-08-29
Rated 5 out of 5 by from Not perfect, but great anyway This faucet is described this way: "simply place your hand near the faucet, tap the faucet surface, or use standard handle activation." The part about placing your hand near the faucet is not reliable, but the tap feature is great and overall we like this faucet a lot.
Date published: 2026-08-28
Rated 4 out of 5 by from spray to stream Great faucet,works as described ,only draw back is,when in spray mood and turned off it dose not go back to stream like other models
Date published: 2026-08-27
Rated 2 out of 5 by from Handle Falls Off and the Faucet Drips I had this faucet installed about Feb 2021. However, about 6 months ago, the handle started to keep falling off because the set screw won't stay secure. Also, the faucet drips about 2 cups of water every day. I live in a drought state, so this is very serious. I researched this and find that you must take the handle assembly apart and replace a cartridge inside of it instead of simply replacing a washer! It's past the warranty period, of course, so I'm stuck with it. I'm not going buy the cartridge and then have to pay a plumber to install a new cartridge every 5 years. This is unacceptable. So I'm just living with this situation and collecting the water it drips each day and pouring it in my garden. But I'm not happy with this situation.
Date published: 2026-08-16
Rated 5 out of 5 by from Upgrade It’s been a week! So far good. I like the touch feature. The style is what we were looking for our Upgrade.
Date published: 2026-07-27
Rated 5 out of 5 by from Great kitchen faucet I now have 3 of these units in our main kitchen, (sink and island sink), and in-law suite kitchen. They are reliable, easy to install and look great. I am very happy with this product, which has replaced other, more expensive brands.
Date published: 2026-07-16
  • y_2026, m_9, d_21, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_609
  • loc_en_US, sid_9113-RB-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 9ms
  • reviews, product
Q&A

Can this faucet be installed on a laminate counter top - or does it need to be installed on a solid surface such as granite or quartz?

Asked by: Mary
Dear Mary, Thank you for your question. The Delta Essa Kitchen faucet can be installed on any standard sink or countertop material with a maximum deck thickness of 2 1/2". Best regards, Tanya
Answered by: Tanya
Date published: 2016-10-17

The base is loose on the marble countertop, causing the handle to rotate when used. What wrench tool can I use to tighten it? I will have to reach it from underneath the sink. I do not have the tightening tool that came with it. Can I use sealant?

Asked by: RobertSF
Thank you for your question, RobertSF! The RP60924 wrench that was included with your model is recommended however an adjustable wrench will also work to tighten the mount nut and bracket below the counter. We do not recommend applying sealant as this could make future repairs difficult. Please contact us directly if you have questions or need further assistance. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP60924 Best regard, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Looking for a high-quality kitchen faucet and am looking at the 9113-AR-DST. I want to buy one that is manufactured (assembled) in the US; can you tell me if this unit is?

Asked by: TomC
Thank you for your question, TomC! We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does the spray head automatically retract or do you have to push it back up?

Saw a comment on Houzz that it did not retract.
Asked by: Anita
Hose doesn't seem to automatically go back into position, but goes easily with a strong magnet type feeling when it get close.
Answered by: Spydergirl
Date published: 2024-03-28

Is there a similar faucet that will fit in a 2” countertop hole?

Asked by: Stridertjs
Tanya, I meant a 2” diameter hole.  This faucet requires a hole size of 1.25 to 1.5 inches, but the hole in my granite countertop is 2 inches. 
Answered by: Stridertjs
Date published: 2024-03-28

hot/cold? and direction

Does this bar faucet dispense hot and cold water? Does the lever only go in one direction or does pulling forward give hot water and pushing backwards give cold water ? Thank you!
Asked by: Linda
Thank you for your question, Linda! This faucet dispenses hot and cold water. The handle operates by tilting away from the faucet to turn on. The vertical position gives cold water and rotating the handle forward provides hot. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How do you install the cartridge

Asked by: Peggy
Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. You will need a 1/8" allen wrench to remove the handle assembly. Please be sure to turn off the water at the shut off valve before removing the handle. You may also need an adjustable wrench to loosen the bonnet nut around the valve cartridge assembly. Once the bonnet nut is removed, the cartridge will slide out. Check the valve body for debris then insert the new cartridge, screw on the bonnet nut and please be sure not to over-tighten the bonnet as we recommend tightening a 1/4 turn to a full turn past finger tight. Then attach the handle with the set screw and this repair is complete. Turn on the shut off valves below the counter slowly and test to make sure the water flows correctly. If you have any questions, please contact us directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there an optional aerator for 1.0 gpm

Asked by: Samuel
Thank you for your question, Samuel! Model 9113-DST does not have a removable or replaceable aerator option. The flow rate can be reduced; however, by simply turning down the shut-off supplies slightly below the counter. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Can this faucet be adjusted for hotter water?

Asked by: Maren
Hello! No, there is no adjustment that can be made to increase temperature. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-12-30

Can Essa faucet be offset with d shape sink?  And is the exact product wherever it’s purchased from?

Asked by: Sharjane
H, Sharjane! We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Here is a link to the technical specifications sheet to make sure this works for your sink set up: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST_A.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Hole size in counter required for 9913-ar-dst

Asked by: Robert
Thank you for your question, Robert. The hole size should be 1 1/4" to 1 1/2". Please see the Technical Specifications for more information. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-07-18

How long should batteries last

Asked by: BobF
Hi, BobF! Thank you for your question. For the Delta 9113T-DST Faucet and all of our Touch2O Faucets, use 6 AA (included) with a battery life of approximately 1 year or 6 C (not included) with a battery life of approximately 3 years. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what size hole in counter top?

Asked by: bob b
Hi, Bob B! Thank you for your question. The hole size should be 1 1/4" to 1 1/2" (32 mm to 38 mm) for the Delta 9113-AR-DST faucet. Here is a link to the technical specifications sheet for further measurement for the faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20B.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the handle be on either side of the faucet ? Essa Single-Handle Pull-Down Sprayer Kitchen Faucet with MagnaTite Docking in Arctic Stainless

Asked by: Kirkline
Hi, Kirkline! Thank you for your question. We recommend installing this faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You could compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button on the handle will no longer indicate the correct temperature. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a soap dispenser that looks good with this? I have a 4 hole configuration and need to fill the 4th hole...

Asked by: Liz
Thank you for your question, Liz. We recommend the RP50781, RP1001, 72065T or 72055T to coordinate with the Essa collection. Here is a link to browse our complete selection of soap dispensers: https://www.deltafaucet.com/kitchen/accessories/soap-dispensers Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Can the faucet be installed with the handle facing forward

Can the faucet be installed with the handle facing forward and not to either the right of left?
Asked by: Marty
Hi Marty, Thank you for your question! The faucet is designed to have the handle installed on the right. It could be installed with the handle on the front, but it will only rotate to the left from the 12 o'clock position. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Soap Dispenser

Is there a particular soap dispenser model that goes with the 9113 faucet model?
Asked by: griega99
Hello Griega99, Thank you for your question! The RP1001 is the soap dispenser listed on the parts diagram of this faucet. However, we encourage our customers to get what they think looks best in their home. Here is a link to all available Delta soap dispensers: http://www.deltafaucet.com/kitchen/accessories/filter-results.html?sort=pricehighlow&type=type-kitacc-soapdispenser&function=kitchen-accessories I hope this helps!
Answered by: DeltaFaucet9
Date published: 2024-03-28

Is it possible to install the controls on the left?

Asked by: Nancy
Hi Nancy, Thank you for your question. The unit is designed for the handle to be installed on the right side. Reversing the faucet will cause the handle to rotate backwards. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

how long is the hose? Is there any reason not to use this faucet at the main kitchen sink?

Asked by: plaza
Hello Plaza, Thank you for your question. The Delta Essa Bar/Prep 9913-AR-DST model has a 62" hose assembly. This model can be used/installed as a kitchen faucet, it just smaller than the kitchen version. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Does this bar faucet swivel side to side in case you need to push it out of the way to make more room in your sink for a taller item? Also do you have to keep the button pressed down in order to keep it on a different spray mode?

Asked by: Nili
Hi, Nill! Thank you for your question. The Delta 9913-DST faucet spout rotates 360˚. The toggle button on the sprayer does not need to be kept pressed down. The button will stay pressed down after the button is released. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can you swing the on/off handle all the way to cold and then turn on the water or does the water come on as soon as you move the handle When turning off the water do you have to bring the handle back to center or can U turn the water off from any position

Asked by: vista9
Hi, Vista9! Thank you for your question. The handle for the Delta 9113-AR-DST will need to be in the center to turn the water off. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Where does the required 1.5" backsplash clearance measure from? Is it the center of the fixture or the exterior of the fixture?

Asked by: Scott
Dear Scott, Thank you for your inquiry! The recommended distance for the Delta Essa kitchen 9113-AR-DST faucet, is min. 1 1/2" (38 mm) clearance to the Back Splash. Please view the link below for the Technical Specifications for the faucet. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2017-03-07

Can this faucet be mounted on a stainless steel sink or must it be deck mounted?

Asked by: Cappy
Hi Cappy, Thank you for your question. The Delta Essa Kitchen 9113-DST faucet can be installed on any standard sink or countertop material with a maximum deck thickness of 2 1/2". However, we do recommend to use the RP37490 Stabilization Plate if installing on a thin gauge metal sink, to help prevent it from flexing. This plate goes under the sink and can be installed as is or cut to fit. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

can the flow rate be changed to 2.2 gpm? thanks.

Asked by: d7e
No, The flow rate is internally fixed in the diverter. There is no external module connected to the spray hose feed.
Answered by: Jim36548
Date published: 2024-03-28

Does the Essa kitchen faucet have the new Shieldspray feature?

Asked by: Kan12
Hi, Kan12! Thank you for your question. The 9113-DST does not have the new ShieldSpray Technology. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Can the Essa bar prep faucet be used as a cold water faucet only connected to an under sink water filter? The water filter is not an RO type.

Asked by: jomo
Thank you for your question, jomo! This bar prep faucet is not recommended to be used with a filtered system. We would recommend a beverage faucet as they have only one supply line and are designed to be a cold water dispenser only. These models are designed to compliment various collections and can be used with filtered or Reverse Osmosis machines. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does this faucet swivel? It will be installed between two sinks and I don't like to use the pull down to fill a sink. I like to move it between the two sinks without the pull down

Asked by: JMR1
Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. The high-arc, gooseneck design on model 9113-AR-DST swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-11-15

Installing Delta faucet 9113-DST. There's a round plastic part in box (gasket?) that instructions/parts list doesn't mention. What is this? Also, does it matter which direction I orient the mounting plate or can it go either way?

Asked by: Lisa
Hi, Lisa. Thank you for your question. The round plastic part is a gasket that Delta 9113-DST Faucet. This gasket goes inside of the base of your faucet. The round hole should go around the mounting shank, and the hoses should go through the other hole. The mounting hardware should only be able to be oriented one direction. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is the pull down hose material metal or mesh?

What material is the hose made of - metal or mesh. A mesh hose is quieter. Just curious.
Asked by: SusanM
Hose is a black mesh.
Answered by: Spydergirl
Date published: 2024-03-28

Can the escutcheon plate be modified for a two or one hole installation?

The escutcheon plate appears to be designed for three holes, since it has two threaded cylinders that appear to be designed to fill the two additional holes adjacent to the main faucet hole. In my installation, I need to cover one additional hole that is currently used for a soap dispenser. Can the escutcheon plate be modified for such an installation? Thank you, Mark
Asked by: Mark
Hi Mark, Thank you for your question. We do not recommend to modify the base plate. You may use a matching soap dispenser or hole cover to fill the second hole. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-09
  • y_2026, m_9, d_21, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_421
  • loc_en_US, sid_9113-RB-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 108ms
  • questions, product
PART LIST

PART LIST

Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP80525

Essa®

Essa® Metal Lever Handle Kit

List Price: $60.75 - $98.45
Free Ground Shipping All Orders $49+

RP80525

Image-Master-RP80524

Essa®

Essa® Spray Assembly - Pull-Down

List Price: $82.40 - $115.30
Free Ground Shipping All Orders $49+

RP80524

Image-Master-RP70714

Essa®

Essa® Escutcheon w/ Baseplate & Nuts

List Price: $62.65 - $113.15
Free Ground Shipping All Orders $49+

RP70714

Image-RP80528

Delta®

Delta® Gasket

List Price: $20.90
Online Price: $16.72
Free Ground Shipping All Orders $49+

RP80528

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-Master-RP80520

Essa®

Essa® Spout Assembly - Kitchen

List Price: $115.30 - $167.80
Free Ground Shipping All Orders $49+

RP80520

Image-RP47888

Allora®

Allora® Soap / Lotion Dispenser - Body Assembly

List Price: $16.60
Online Price: $13.28
Free Ground Shipping All Orders $49+

RP47888

4.06 18
Image-RP80523

Delta®

Delta® Hose Weight Assembly

List Price: $53.40
Online Price: $42.72
Free Ground Shipping All Orders $49+

RP80523

Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP80522

Delta®

Delta® Hose Assembly

List Price: $91.00
Online Price: $72.80
Free Ground Shipping All Orders $49+

RP80522

5.00 1
Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2

BUNDLES FEATURING THIS PRODUCT

Only at Online Retailers
Image-Master-FVS9113-SD-DST
Only at Online Retailers

Essa®

Essa® Kitchen Faucet with Soap Bundles

List Price: $541.60 - $802.75
Standard Finishes

FVS9113-SD-DST

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.