Single Handle Pull-Down Kitchen Faucet with Touch<sub>2</sub>O® Technology in Matte Black
Model#:
9159T-BL-DST
PRODUCT FEATURES
Touch it on. Touch it off. Whether you have two full hands or 10 messy fingers, Delta® Touch2O® Technology helps keep your faucet clean, even when your hands aren’t. A simple touch anywhere on the spout or handle with your wrist or forearm activates the flow of water at the temperature where your handle is set. The Delta TempSense™ LED light changes color to alert you to the water’s temperature and eliminate any possible surprises or discomfort. Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. Electronic parts are backed by our 5-year electronic parts warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
- With Touch2O® Technology a simple touch anywhere on the spout or handle will start and stop the flow of water
- Helps keep your faucet cleaner, because washing the mess off your hands shouldn't involve making a mess of your faucet
- LED light signals blue when touch mode is active and flash red when batteries are running low
- Automatic water flow shut-off after four minutes helps conserve water
- Integrated TempSense™ LED light shows water temperature, changing from blue to magenta to red as temperature increases
- Battery operated 6 AA (included) with a battery life of approximately 1 year or 6 C (not included) with a battery life of approximately 3 years
- Intuitive Touch2O® Technology can sense the difference between a touch and a grab, reducing the chances of false activation
- Optional A/C adapter EP102157 may be ordered separately
- MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
- Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
- 1 or 3-hole 8" installation
- ADA Compliant
- The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Water-Efficient
Water-Efficient
CalgreenCert Tooltip information here...
Diamond Seal® Technology
Diamond Seal® Technology
DIAMOND™ Seal Technology is Delta’s revolutionary new water delivery system. An internal contact surface made up of tiny diamonds makes the valve leak-free and extraordinarily durable. It also keeps water free of contact with potential metal contaminants.
MagnaTite® Docking
MagnaTite® Docking
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
VoiceIQ® Compatible
VoiceIQ® Compatible
VoiceIQ® capabilities can be added to any Delta® Touch2O® Faucet manufactured after 01/01/2018.
Touch2O® Technology
Touch2O® Technology
Touch2O® Technology lets you turn the water on or off just by touching any part of the handle or faucet. It’s more sanitary, and it lets you save water by stopping it momentarily when your hands are full and you don’t want to reach back and manually turn the handle.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
1 or 3-hole 6" or 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-3/16
Valve Type:
Ceramic Disc
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
Anonymous from
Great faucet
Great faucet. I live the touch faucet.
Date published: 2026-04-25
Rated 5 out of
5
by
Rambo from
This works just as advertised and is convenient
Super cool and easy maintenance
Date published: 2026-04-10
Rated 1 out of
5
by
Disappointed from
The quality of this faucet is terrible.
We have changed the battery at least 6 times in the last 18 months and now it's just not working at all. Not worth the trouble to have the touch activation or sensor if they don't work properly. Very frustrated customer.
Date published: 2026-02-06
Rated 2 out of
5
by
WAN2025 from
Beautiful but...
I absolutely love the look of this but less than two months in, it started intermittently leaking from the spray nozzle. I've cleaned the nozzle numerous times and tried everything to get it to stop to no avail. VERY disappointing. I did not expect this so early in it's lifetime and it is not returnable.
Date published: 2025-11-29
Rated 3 out of
5
by
AleAlberti from
Magnetic ring detached and broke.
Hi, is an excellent product, I would like to know if you sell the magnetic ring, is not on your parts list.
Mine detached from the goose neck, and it broke.
Is a metal magnetic ring. I Really need this part and instructions of how to attach it.
Date published: 2025-05-15
Rated 5 out of
5
by
Barbsnickname from
Pretty good
We like this pretty well, although it seems more awkward than the previous Brio that we had before when switching between regular water and spray.
Date published: 2025-04-16
Rated 5 out of
5
by
Mary Ann from
Heavy Duty Quality Faucet!
This faucet is quality made! I can’t wait to install it. Everything I have purchased from this company is noticeably excellent and high quality!
Date published: 2025-03-14
Rated 2 out of
5
by
aiky from
Overengineered.
The solenoid ("brain") failed and had to be replaced within the first 3 months after installation. Delta sent a new solenoid which seemed to work fine. However, two years later, it is again malfunctioning. If you turn on the faucet, it randomly turns itself off without being touched. It is very annoying and I'd just as soon have a traditional faucet that works with the handle for on & off. No more of the touch on & off. The six batteries need to be replaced about every four months; expensive and also very annoying.
The spray feature works very well.
Date published: 2025-01-12
Q&A
We have a 9159t -dst faucet. It is about 4 years old. Just recently it has started to drip when shot off with touch mode. If turned off manually it does not drip. Could you let me know the possible problem. Thanks you!
Hello Jeff,
Thank you for your question! We apologize for the leak you are experiencing with your Delta Faucet Trinsic Single Handle Pull-Down Kitchen Faucet With Touch2O Technology In Chrome MODEL: 9159T-DST and will be happy to help you.
Leaking is typically caused by debris, which can get caught in a few different areas of the faucet. Please try the following steps, so we can better assist you:
1) First, please unscrew the wand from the hose and turn the faucet on for 4 minutes to flush the lines and see if you get good flow out of the end of the hose. Please check for debris in the wand and re-attach it. Be careful not to let go of the hose with the wand removed, or it may retract into the faucet.
2) Next, turn the handle to the off position, place a bucket under the sink, disconnect the solenoid assembly from the gray PEX tube and check for debris in the screen at the top of the solenoid assembly. If the solenoid assembly is gray, the screen cannot be removed. If it is black, you can use a pair of needle-nose pliers to take the screen out and clean it.
3) Finally, reattach everything and test the flow rate from the wand again.
If this does not resolve the issue, please let us know the results of the tests. Please also provide your address, phone number, and email along with the approximate date that the faucet was installed and a photo of the sticker on the solenoid assembly.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
We have just installed a Trinsic 9159T-CZ-DST in our kitchen. When looking at the faucet from the sink, what position should the lever be in for cold water? Should it be pointed up or pointed to the front, ie vertical or horizontal?
Hi Pking,
Thanks so much for contacting Delta Faucet Company!
The 9159T-DST handle should be straight up then tilt out for cold, and pull forward for hot.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
Recently, the blue light no longer comes on when operating. I unplugged the battery box and replaced the batteries to reset, and the light blinked red once. The faucet appears to be functioning normally otherwise. Does something need replacement?
The aerator on my faucet broke off - can I replace it and do you sell a replacement part?
Hello!
Thank you for contacting Delta Faucet Company!
The aerator for our 9159T-AR-DST is the wand, RP64069AR.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2025-11-12
Need a replacement nozzle (A12.181) for my kitchen pull down faucet. Can't find it listed anywhere. Help!
Hello Logical1!
Thank you for your question and we are happy to help! There is no removable aerator for the Delta 9159T-DST. Instead, the entire spray head (RP640690 will need to be replaced. With any further questions or concerns, please do not hesitate to reach out to us directly.
Best Regards,
Carrie
Date published: 2024-03-28
My faucet has started not turning on when touched. I have already changed the batteries and the light turns on when touched but no water. Please help. Thx
Hi Ryan B,
Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Arctic Stainless MODEL#: 9159T-AR-DST. Here is what we can do to resolve your issue for you.
I would like to have you do a flush of the unit, flushing the touch faucet will fix multiple issues with leaking, flow, and debris. Please see the steps below.
I would like you to keep the handle in the center full-on position, then remove the wand. Hold the hose, so it does not fall back into the faucet, then point the hose into the sink. Next, I would like you to turn the faucet on by touch for 40 seconds. Then shut the faucet off by touch and back on for another 40 seconds.
Then hold the handle and move it off and then back on without letting go for another 40 seconds. Once this has been done, please re-install the wand and check for leaking.
Next, check the supply lines for debris:
Turn the supply off to both the hot and cold-water lines.
Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water.
Next, disconnect the hot water supply line and place it inside a bucket.
Once the line is securely positioned into the bucket, turn on the cold-water supply.
Next do this again with the hot supply, hook up both hot and cold supply and turn hot and cold valve open fully and equally.
Once the faucet has been flushed, you should have flow again.
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
We have this faucet and the accessory EP102157 AC Power Supply. I'm not clear how it works with both power supplies. Both are connected into the solenoid unit. When will it use AC power vs using battery power? It stops working when the batteries are low.
Hello Valued Customer,
Thank you for contacting Delta Faucet Company!
When the A/C adapter is installed the faucet will use the power from the A/C adapter first, and if the A/C adapter is not working for any reason, the faucet will pull power from the batteries.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2025-05-28
The magna tight docking station has rusted out and no longer stays attached. I see the replacement part for the flex hose with the sprayer. But the faucet part is rusted out ? Do you sell this part? What is the warranty? Thank you so much.
Hi Robbie,
Thank you for reaching out to Delta Faucet Company!
We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2024-01-31
I have a Delta kitchen sink faucet, model # 9159TL-AR-DST. I need to replace the magnet that holds the spray nozzle. It is my understanding that Delta will provide that at no cost. Is that correct?
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-06-05
The faucet stream has become erratic and not a smooth stream. Almost as if the stream is generated from the inside part instead of the outer holes. It’s coming out too tight and forceful. Makes a mess. We think a piece might have fallen off possibly.
Hi Stevie G, thank you for contacting Delta Faucet Company!
We apologize for the issues you are experiencing and are happy to assist! Our 9959T-DST has a maximum flow rate of 1.8 GPM at 60 PSI.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2023-02-21
Do I need to change solenoid?
Hi Nan03,
Thank you for your question about the Delta Faucet model 9159T-DST.
To troubleshoot an issue with the touch function of the faucet, we recommend the video here:
https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981
If the issue remains, a replacement solenoid is available as EP92546 for models produced after 01/01/2018. Or as EP74855 for models produced before 01/01/2018.
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-07-23
I have a Delta 92519 Touch and all of a sudden the hot water lost pressure. The cold water is normal. Any ideas?
Hi Price!
Thank you for your question and we are happy to help. We recommend flushing the valves of the Delta 9159T-AR-DST. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2023-05-13
What is the height of the Trinsic faucet?
Hello, Carole!
Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help!
This Delta Faucet 9959-DST Trinsic Single Handle Pull-Down Bar / Prep Faucet has an overall height of 13". Please see the following link for more information.
https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf
Please contact us directly if further assistance is needed at this time.
We appreciate your loyalty to Delta Faucet Company.
Best Regards,
Tim
Date published: 2024-03-28
I have a Trinsic arctic stainless single handle pull down faucet. Model # 9159T-AR-DST The screen fell out of the nozzle. I need additional information regarding a part number and a price.
Good morning Carmah!
Thank you for your question! I do apologize that your aerator is damaged we will be happy to help you.
This faucet does not have a replaceable aerator. To repair the faucet, you will need to replace the entire sprayer assembly. The part number for that part is an RP64069.
Please contact us back for any further questions.
Best Regards,
Frank
Date published: 2024-03-28
Can I get a replacement ring for the drain that matches my delta 9959T-CZ-DST
Hello CA66,
Thank you for your question. We are happy to help!
To match your Delta 9959T-CZ-DST faucet, we offer the kitchen flange and stopper 72030-CZ, kitchen flange and strainer 72010-CZ, and bar/prep sink flange and strainer 72011-CZ.
https://www.deltafaucet.com/kitchen/product/72030-CZ.html
https://www.deltafaucet.com/kitchen/product/72010-CZ.html
https://www.deltafaucet.com/kitchen/product/72011-CZ.html
Best regards,
Bryan
Date published: 2024-03-28
This faucet has worked well for years. It has recently developed a continuous drip when the water is “tapped” off. However, it does not drip if the water handle is put in the “Off” or “Closed” position. Is this a solenoid or cartridge issue?
Hello Will07,
Thank you for contacting Delta Faucet Company. I am sorry to hear that your Trinsic® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Arctic Stainless MODEL#: 9159T-AR-DST is leaking when off, which can be very frustrating. I am so glad that you contacted us, so we can get this taken care of for you!
I would like to have you do a flush of the unit, flushing the touch faucet will fix multiple issues with leaking, flow, and debris. Please see the steps below.
I would like you to keep the handle in the center full-on position, then remove the wand. Hold the hose, so it does not fall back into the faucet, then point the hose into the sink. Next, I would like you to turn the faucet on by touch for 40 seconds. Then shut the faucet off by touch and back on for another 40 seconds.
Then hold the handle and move it off and then back on without letting go for another 40 seconds. Once this has been done, please re-install the wand and check for leaking.
Next, check the supply lines for debris:
Turn the supply off to both the hot and cold-water lines.
Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water.
Next, disconnect the hot water supply line and place it inside a bucket.
Once the line is securely positioned into the bucket, turn on the cold-water supply.
If you have not already, please include your date of installation, full name, street address, city, state, zip code, and phone number for our reference. This allows us to more quickly resolve your issue. We appreciate your business and look forward to continuing to serve you.
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
The Faucet stops working sometimes, with touch or manually. We have to wait several minutes and then it starts operating manually, and then with touch. Changed the batteries but it did not seem to help.
Solenoid help. When the touch faucet is off (we have touched it to turn off), while the handle is on, the faucet drips.When we turn it off by the handle, it doesn't drip from the faucet. What's wrong with the valve in the solenoid? (The filter is clean.)
Is this compliant with California Codes?
Thank you for your question, maddiel! Delta Trinsic model 9159T-DST passes all compliance legislation that allows it to be sold and shipped in the state of California.
https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20G.pdf
Best Regards. Benjamin
Date published: 2024-03-28
I need to replace the aerator part number A112.18.1M
Hi George,
Thanks so much for contacting Delta Faucet Company!
The aerator for model 9959T-AR-DST is not available separately, if you are having flow issues we would recommend soaking the wand and flushing the faucet. Please see the link below to the Help Center for further assistance.
https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
how do I clean the screen in the faucet. Cant get it off
Is there a push-button (in-counter) disposal button recommended to match the finish (champagne bronze) on this sink?
Hello ShuE,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet TRINSIC® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology MODEL#: 9159T-CZ-DST has a matching air switch in CZ, part number 72050-CZ. Please see the link below.
https://www.deltafaucet.com/kitchen/product/72050-CZ.html
Thank you for being a loyal Delta customer. Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
I have a Delta Leland 9159T-DST faucet that was working well but now I get no hot water. All other faucets have hot water. What can I check?
Hi Denny,
Thank you for your question about the Delta Faucet model 9159T-DST Trinsic® Single Handle Pull-Down Kitchen Faucet With Touch2O® Technology In Chrome. I apologize for not having hot water. I know that can be frustrating. We are happy to help!
The issue is likely caused by water debris in the hot water supply or faucet. To flush the faucet, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply.
Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold water line to ensure all particles have been removed from both supplies.
If the issue remains, I recommend replacing the cartridge assembly. See the part diagram for the part number for your date of manufacture.
https://media.deltafaucet.com/PartsDiagram/DPD-K-9159T-DST%20Rev%20F.pdf
Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Love this faucet, but my hose will no longer stay attached to the faucet (hangs there), the little magnet/gasket broke off. Is there a replacement part?
The flow seems quite low. I would like to know if I can remove the cartrige to bump up the flow??
Hi DKiki,
Thank you for your question about the Delta Faucet model 9159T-CZ-DST.
The faucet will not function without the cartridge. The faucet's maximum flow rate is determined by the spray wand. To troubleshoot an issue with reduced flow, I recommend cleaning the debris screen in the top of the solenoid valve, flushing the faucet with the spray wand removed, and soaking the spray wand in a 50/50 mixture of white vinegar and water to help remove any minerals or buildup. See page 11 of the faucet manual for more information:
https://media.deltafaucet.com/MandI/106559%20Rev%20G.pdf
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2025-04-23
My 9159T faucet is leaking when the handle is in the on position in between touches. It stops when I manually turn off. Can you tell me what parts I need to repair it? Is the DELTA Valve MODEL#: RP60114 all I need or are there other parts I need?
Hi FBJJ,
Thank you for your review of the Delta Faucet TRINSIC® Pull-Down Kitchen Faucet MODEL#: 9159T-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are always happy to assist you. Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance.
It is possible that a flush could resolve this issue. To flush the solenoid:
Keep the handle in the off position. Remove the clip that is attached to the braided hose on the bottom of the solenoid. After the hose is removed, place a bucket under the solenoid, and then open the handle. It's helpful to have someone control the handle while the other person is in the cabinet with the bucket.
We would also advise flushing the hot and cold lines.
1. Please be sure to turn the water supply off before beginning this process.
2. Move the handle to the full mixed position.
3. Disconnect the faucet supply line from the hot side.
4. Position a bucket with the supply line connection inside the bucket.
5. Turn on the supply stop on the connected supply line side slowly, directing the water from the disconnected side into the bucket.
6. Reconnect the supply line.
*Please use caution when flushing the hot water.*
You'll want to repeat steps 1-6 for the cold side. Once you've done the flushing, you can turn the water supply back on to the faucet.
We appreciate your business and look forward to continuing to serve you. Please contact us directly if you have any further questions.
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2023-02-09
Where do I buy the part RP808977 for Trinsic 9159T?
Hi Suhail,
Thanks so much for contacting Delta Faucet Company!
The Magnet Replacement Kit MODEL#: RP80977 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2023-02-14
How do you change the cartridge?
Hi fredoxx4!
Thank you for your question and we are happy to help. You will need to shut off your faucets water supply before repairing the faucet. You will then use a 1/8th allen wrench to remove the handle and then a crescent wrench to remove the bonnet nut. You will then be able to replace the cartridge. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2024-02-20
can this faucet be used without the touch feature?
Hello Valued Customer,
Thank you for contacting Delta Faucet Company!
Yes, you can bypass our 9159T-KS-DST to work as a manual faucet.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2025-07-16
My faucet won’t turn on. I have replaced the batteries and still nothing. The light comes on and I sometimes can hear a “click” but nothing happens.
Hi NicBrown,
Thanks so much for contacting Delta Faucet Company about the 9959T-DST!
I have included a link below to our Help Center with a few troubleshooting steps.
https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
PART LIST
PART LIST
View Product
![Image-EP100855]()
DELTA
DELTA VoiceIQ® Module
List Price:
$250.85
Online Price:
$160.12
Free Ground Shipping All Orders $49+
EP100855
4.30
99
View Product
![Image-EP92546]()
DELTA
DELTA Solenoid Assembly
List Price:
$260.00
Online Price:
$172.40
Free Ground Shipping All Orders $49+
EP92546
3.69
51
FEATURED ACCESSORIES
View Product
![Image-EP100855]()
DELTA
DELTA VoiceIQ® Module
List Price:
$250.85
Online Price:
$160.12
Free Ground Shipping All Orders $49+
EP100855
4.30
99
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.