Single Handle Pull-Down Kitchen Faucet with Touch<sub>2</sub>O® Technology in Matte Black

Model#: 9159T-BL-DST
Single Handle Pull-Down Kitchen Faucet with Touch<sub>2</sub>O® Technology in Matte Black
Model#: 9159T-BL-DST
List Price: $1,14200
PRODUCT FEATURES
Touch it on. Touch it off. Whether you have two full hands or 10 messy fingers, Delta® Touch2O® Technology helps keep your faucet clean, even when your hands aren’t. A simple touch anywhere on the spout or handle with your wrist or forearm activates the flow of water at the temperature where your handle is set. The Delta TempSense™ LED light changes color to alert you to the water’s temperature and eliminate any possible surprises or discomfort. Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. Electronic parts are backed by our 5-year electronic parts warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • With Touch2O® Technology a simple touch anywhere on the spout or handle will start and stop the flow of water
  • Helps keep your faucet cleaner, because washing the mess off your hands shouldn't involve making a mess of your faucet
  • LED light signals blue when touch mode is active and flash red when batteries are running low
  • Automatic water flow shut-off after four minutes helps conserve water
  • Integrated TempSense™ LED light shows water temperature, changing from blue to magenta to red as temperature increases
  • Battery operated 6 AA (included) with a battery life of approximately 1 year or 6 C (not included) with a battery life of approximately 3 years
  • Intuitive Touch2O® Technology can sense the difference between a touch and a grab, reducing the chances of false activation
  • Optional A/C adapter EP102157 may be ordered separately
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
VoiceIQ® Compatible
Touch2O® Technology
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 6" or 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-3/16
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Great product I replaced this faucet with a new one when the last had issues (over 11 years old). The convenience of the touch faucet is undeniable and when you use a faucet that is different you will find your self tapping it to no avail. Other the issue of the high cost I would put them at every sink.
Date published: 2026-06-27
Rated 5 out of 5 by from Great faucet Great faucet. I live the touch faucet.
Date published: 2026-04-25
Rated 5 out of 5 by from This works just as advertised and is convenient Super cool and easy maintenance
Date published: 2026-04-10
Rated 1 out of 5 by from The quality of this faucet is terrible. We have changed the battery at least 6 times in the last 18 months and now it's just not working at all. Not worth the trouble to have the touch activation or sensor if they don't work properly. Very frustrated customer.
Date published: 2026-02-06
Rated 2 out of 5 by from Beautiful but... I absolutely love the look of this but less than two months in, it started intermittently leaking from the spray nozzle. I've cleaned the nozzle numerous times and tried everything to get it to stop to no avail. VERY disappointing. I did not expect this so early in it's lifetime and it is not returnable.
Date published: 2025-11-29
Rated 3 out of 5 by from Magnetic ring detached and broke. Hi, is an excellent product, I would like to know if you sell the magnetic ring, is not on your parts list. Mine detached from the goose neck, and it broke. Is a metal magnetic ring. I Really need this part and instructions of how to attach it.
Date published: 2025-05-15
Rated 5 out of 5 by from Pretty good We like this pretty well, although it seems more awkward than the previous Brio that we had before when switching between regular water and spray.
Date published: 2025-04-16
Rated 5 out of 5 by from Heavy Duty Quality Faucet! This faucet is quality made! I can’t wait to install it. Everything I have purchased from this company is noticeably excellent and high quality!
Date published: 2025-03-14
  • y_2026, m_9, d_26, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_203
  • loc_en_US, sid_9159T-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

A label under the sink says #9959, but I believe it's 9959T of some sort because it does have the touch technology and the blue LED works. However, the LED won't change to red when the water heats up. Is something not working, or do I have an old model?

Asked by: Nick

9159T-AR-DST (mfg: T09/27/2012) solenoid replacement part? EP92546 or EP74855?

Asked by: Felix
Hi Felix, Thanks so much for contacting Delta Faucet Company about 9159T-AR-DST! The faucet has two solenoid options depending on what year it was manufactured. The hot water supply line will have the manufacturing date. If the faucet was installed before 2018, you would need EP74855. If the faucet was installed after 2018, you would need EP92546. I have included the parts diagram showing this information. https://media.deltafaucet.com/PartsDiagram/DPD-K-9159T-DST%20Rev%20I.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Faucet has constant trickle when touched to turn off so I have to always turn off manually. &nbsp;How can I repair?

Asked by: Nveale3238
Hello, Thank you for contacting us at Delta Faucet. I apologize about the leaking issue with your faucet but am happy to help. I have reached out to you via email at this time to further assist. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Water is dripping from the spout after turning off the faucet through touch (handle is still on). If I shut down the handle completely then the water doesn&rsquo;t drip. How can I handle this problem?

Asked by: Yeun
Hello Yeun, Thank you for contacting us. I apologize for the leak when touched off that you are experiencing with your Delta Faucet model 9159T-DST Single Handle Pull-Down Kitchen Faucet With Touch2O&reg; Technology and I am happy to help you. The leak when off you are experiencing appears to be caused by debris within the solenoid assembly. We recommend doing a flush on your electronic components. Please follow the below steps to resolve your drip: 1. Put the handle in the off position. 2. Remove the blue clip that is attached to the top of the solenoid assembly below the sink. 3. Pull the solenoid off of the faucet connection. Remove the debris screen in the top connection if able and clear any debris with tweezers or a q-tip. 4. Set a bucket under the pex supply line that is exposed. 5. Place the handle in the on position and allow it to run water for 2 full minutes. This will clear the supply line out of any debris. 6. Put the handle back into the off position. 7. Reconnect the solenoid to the faucet and clip it back into place. 8. Now remove the bottom clip from the solenoid where the hose connects and pull the hose off. 9. Turn the water back on for an additional 2 minutes to clear the solenoid assembly of any remaining debris. 10. Reconnect the hose and clip it into place again. Once that is finished, turn the water on to the faucet and run it for 15 seconds. Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

does this faucet have a pull down spray hose?

Asked by: Shari
Hello! Yes, this model includes a hose. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-08-07

The faucet is dripping when in the on position but not on. It does not drip if the handle is in the off position. Do I need to replace the RP73000 cartridge?

Asked by: Alan1
Hi Alan1, Thank you for contacting Delta Faucet Company! We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I would like to have the ability to use the faucet in pure manual mode. I saw that I can disable the touchless mode. Is there a way to disable the TempSense indicator ?

Asked by: Dora
Hi Valued Customer, Thank you for your question regarding our Delta Faucet 9159T-DST. Please refer to the link below on of the Maintenace and installation sheet in the link below on page 11. The TempSense can be unplugged from the solenoid. https://media.deltafaucet.com/MandI/114376%20Rev%20B.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-11-27

The battery compartment will not close anymore and therefore the faucet does not work

Asked by: Carol
Hello! Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2026-01-13

We have a 9159t -dst faucet. It is about 4 years old. Just recently it has started to drip when shot off with touch mode. If turned off manually it does not drip. Could you let me know the possible problem. Thanks you!

Asked by: Jeff
Hello Jeff, Thank you for your question! We apologize for the leak you are experiencing with your Delta Faucet Trinsic Single Handle Pull-Down Kitchen Faucet With Touch2O Technology In Chrome MODEL: 9159T-DST and will be happy to help you. Leaking is typically caused by debris, which can get caught in a few different areas of the faucet. Please try the following steps, so we can better assist you: 1) First, please unscrew the wand from the hose and turn the faucet on for 4 minutes to flush the lines and see if you get good flow out of the end of the hose. Please check for debris in the wand and re-attach it. Be careful not to let go of the hose with the wand removed, or it may retract into the faucet. 2) Next, turn the handle to the off position, place a bucket under the sink, disconnect the solenoid assembly from the gray PEX tube and check for debris in the screen at the top of the solenoid assembly. If the solenoid assembly is gray, the screen cannot be removed. If it is black, you can use a pair of needle-nose pliers to take the screen out and clean it. 3) Finally, reattach everything and test the flow rate from the wand again. If this does not resolve the issue, please let us know the results of the tests. Please also provide your address, phone number, and email along with the approximate date that the faucet was installed and a photo of the sticker on the solenoid assembly. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

We have just installed a Trinsic 9159T-CZ-DST in our kitchen. When looking at the faucet from the sink, what position should the lever be in for cold water? &nbsp;Should it be pointed up or pointed to the front, ie vertical or horizontal?

Asked by: Pking
Hi Pking, Thanks so much for contacting Delta Faucet Company! The 9159T-DST handle should be straight up then tilt out for cold, and pull forward for hot. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Recently, the blue light no longer comes on when operating. I unplugged the battery box and replaced the batteries to reset, and the light blinked red once. The faucet appears to be functioning normally otherwise. Does something need replacement?

Asked by: smppro13

The aerator on my faucet broke off - can I replace it and do you sell a replacement part?

Asked by: Aerator
Hello! Thank you for contacting Delta Faucet Company! The aerator for our 9159T-AR-DST is the wand, RP64069AR. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-11-12

Need a replacement nozzle (A12.181) for my kitchen pull down faucet. Can't find it listed anywhere. Help!

Asked by: Logical1
Hello Logical1! Thank you for your question and we are happy to help! There is no removable aerator for the Delta 9159T-DST. Instead, the entire spray head (RP640690 will need to be replaced. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

My faucet has started not turning on when touched. I have already changed the batteries and the light turns on when touched but no water. Please help. Thx

Asked by: Ryan B
Hi Ryan B, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with Delta Faucet Trinsic&reg; Single Handle Pull-Down Kitchen Faucet With Touch2O&reg; Technology In Arctic Stainless MODEL#: 9159T-AR-DST. Here is what we can do to resolve your issue for you. I would like to have you do a flush of the unit, flushing the touch faucet will fix multiple issues with leaking, flow, and debris. Please see the steps below. I would like you to keep the handle in the center full-on position, then remove the wand. Hold the hose, so it does not fall back into the faucet, then point the hose into the sink. Next, I would like you to turn the faucet on by touch for 40 seconds. Then shut the faucet off by touch and back on for another 40 seconds. Then hold the handle and move it off and then back on without letting go for another 40 seconds. Once this has been done, please re-install the wand and check for leaking. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Next do this again with the hot supply, hook up both hot and cold supply and turn hot and cold valve open fully and equally. Once the faucet has been flushed, you should have flow again. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

We have this faucet and the accessory EP102157 AC Power Supply. I'm not clear how it works with both power supplies. Both are connected into the solenoid unit. When will it use AC power vs using battery power? It stops working when the batteries are low.

Asked by: DSchorow
Hello Valued Customer, Thank you for contacting Delta Faucet Company! When the A/C adapter is installed the faucet will use the power from the A/C adapter first, and if the A/C adapter is not working for any reason, the faucet will pull power from the batteries. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-05-28

The magna tight docking station has rusted out and no longer stays attached. &nbsp;I see the replacement part for the flex hose with the sprayer. But the faucet part is rusted out ? &nbsp;Do you sell this part? &nbsp; What is the warranty? &nbsp;Thank you so much.&nbsp;

Asked by: Robbie
Hi Robbie, Thank you for reaching out to Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

I have a Delta kitchen sink faucet, model # 9159TL-AR-DST. I need to replace the magnet that holds the spray nozzle. It is my understanding that Delta will provide that at no cost. Is that correct?

Asked by: Tony
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-06-05

The faucet stream has become erratic and not a smooth stream. Almost as if the stream is generated from the inside part instead of the outer holes. It&rsquo;s coming out too tight and forceful. Makes a mess. We think a piece might have fallen off possibly.&nbsp;

Asked by: Stevie G
Hi Stevie G, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and are happy to assist! Our 9959T-DST has a maximum flow rate of 1.8 GPM at 60 PSI. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-02-21

Do I need to change solenoid? &nbsp;

Asked by: Nan03
Hi Nan03, Thank you for your question about the Delta Faucet model 9159T-DST. To troubleshoot an issue with the touch function of the faucet, we recommend the video here: https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981 If the issue remains, a replacement solenoid is available as EP92546 for models produced after 01/01/2018. Or as EP74855 for models produced before 01/01/2018. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-07-23

I have a Delta 92519 Touch and all of a sudden the hot water lost pressure. &nbsp;The cold water is normal. Any ideas?

Asked by: Price
Hi Price! Thank you for your question and we are happy to help. We recommend flushing the valves of the Delta 9159T-AR-DST. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2023-05-13

What is the height of the Trinsic faucet?

Asked by: carole
Hello, Carole! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! This Delta Faucet 9959-DST Trinsic Single Handle Pull-Down Bar / Prep Faucet has an overall height of 13&quot;. Please see the following link for more information. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Please contact us directly if further assistance is needed at this time.&nbsp; We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

I have a Trinsic arctic stainless single handle pull down faucet. Model # 9159T-AR-DST The screen fell out of the nozzle. I need additional information regarding a part number and a price.

Asked by: Carmah
Good morning Carmah! Thank you for your question! I do apologize that your aerator is damaged we will be happy to help you. This faucet does not have a replaceable aerator. To repair the faucet, you will need to replace the entire sprayer assembly. The part number for that part is an RP64069. Please contact us back for any further questions. Best Regards, Frank
Answered by: Frank
Date published: 2024-03-28

Can I get a replacement ring for the drain that matches my delta 9959T-CZ-DST

Asked by: CA66
Hello CA66, Thank you for your question. We are happy to help! To match your Delta 9959T-CZ-DST faucet, we offer the kitchen flange and stopper 72030-CZ, kitchen flange and strainer 72010-CZ, and bar/prep sink flange and strainer 72011-CZ. https://www.deltafaucet.com/kitchen/product/72030-CZ.html https://www.deltafaucet.com/kitchen/product/72010-CZ.html https://www.deltafaucet.com/kitchen/product/72011-CZ.html Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

This faucet has worked well for years. It has recently developed a continuous drip when the water is &ldquo;tapped&rdquo; off. However, it does not drip if the water handle is put in the &ldquo;Off&rdquo; or &ldquo;Closed&rdquo; position. Is this a solenoid or cartridge issue?

Asked by: Will07
Hello Will07, Thank you for contacting Delta Faucet Company. I am sorry to hear that your Trinsic&reg; Single Handle Pull-Down Kitchen Faucet With Touch2O&reg; Technology In Arctic Stainless MODEL#: 9159T-AR-DST is leaking when off, which can be very frustrating. I am so glad that you contacted us, so we can get this taken care of for you! I would like to have you do a flush of the unit, flushing the touch faucet will fix multiple issues with leaking, flow, and debris. Please see the steps below. I would like you to keep the handle in the center full-on position, then remove the wand. Hold the hose, so it does not fall back into the faucet, then point the hose into the sink. Next, I would like you to turn the faucet on by touch for 40 seconds. Then shut the faucet off by touch and back on for another 40 seconds. Then hold the handle and move it off and then back on without letting go for another 40 seconds. Once this has been done, please re-install the wand and check for leaking. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. If you have not already, please include your date of installation, full name, street address, city, state, zip code, and phone number for our reference. This allows us to more quickly resolve your issue. We appreciate your business and look forward to continuing to serve you. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

The Faucet stops working sometimes, with touch or manually. We have to wait several minutes and then it starts operating manually, and then with touch. Changed the batteries but it did not seem to help.

Asked by: AnaDhruv

Solenoid help. When the touch faucet is off (we have touched it to turn off), while the handle is on, the faucet drips.When we turn it off by the handle, it doesn't drip from the faucet. What's wrong with the valve in the solenoid? (The filter is clean.)

Asked by: Summer

Is this compliant with California Codes?

Asked by: maddiel
Thank you for your question, maddiel! Delta Trinsic model 9159T-DST passes all compliance legislation that allows it to be sold and shipped in the state of California. https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20G.pdf Best Regards. Benjamin
Answered by: Benjamin
Date published: 2024-03-28

I need to replace the aerator part number A112.18.1M

Asked by: George
Hi George, Thanks so much for contacting Delta Faucet Company! The aerator for model 9959T-AR-DST is not available separately, if you are having flow issues we would recommend soaking the wand and flushing the faucet. Please see the link below to the Help Center for further assistance. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Faucet started dripping, and won't stop when shutong off using the touch feature, but stops when putting the handle in off position. I tried to flush it to clean debri, but got kind of worse. I think the solenoid valva is damaged. How can I replace it?

Asked by: John2015
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-08-07

how do I clean the screen in the faucet. &nbsp;Cant get it off

Asked by: barb
  • y_2026, m_9, d_26, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_9, bvpage2n
  • co_hasquestionsanswers, tq_263
  • loc_en_US, sid_9159T-BL-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 72ms
  • questions, product
PART LIST

PART LIST

Image-EP102157 Secondary Image-EP102157

DELTA

DELTA A/C Power Supply

List Price: $81.00
Online Price: $81.00
Free Ground Shipping All Orders $49+

EP102157

4.35 31
Image-EP100855 Secondary Image-EP100855

DELTA

DELTA VoiceIQ® Module

List Price: $250.85
Online Price: $160.12
Free Ground Shipping All Orders $49+

EP100855

4.27 100
Image-EP92546

DELTA

DELTA Solenoid Assembly

List Price: $260.00
Online Price: $172.40
Free Ground Shipping All Orders $49+

EP92546

3.60 53

BUNDLES FEATURING THIS PRODUCT

Only at Online Retailers
Image-Master-FVS9159T-SD-DST
Only at Online Retailers

Trinsic®

Trinsic® Kitchen Faucet with Soap Bundles

List Price: $1,070.60 - $1,431.75
Standard Finishes

FVS9159T-SD-DST

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.