Single Handle Pull-Down Bar / Prep Faucet in Matte Black

Model#: 9913-BL-DST
Single Handle Pull-Down Bar / Prep Faucet in Matte Black
Model#: 9913-BL-DST
List Price: $52800
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14.5
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 2 out of 5 by from Handle Falls Off and the Faucet Drips I had this faucet installed about Feb 2021. However, about 6 months ago, the handle started to keep falling off because the set screw won't stay secure. Also, the faucet drips about 2 cups of water every day. I live in a drought state, so this is very serious. I researched this and find that you must take the handle assembly apart and replace a cartridge inside of it instead of simply replacing a washer! It's past the warranty period, of course, so I'm stuck with it. I'm not going buy the cartridge and then have to pay a plumber to install a new cartridge every 5 years. This is unacceptable. So I'm just living with this situation and collecting the water it drips each day and pouring it in my garden. But I'm not happy with this situation.
Date published: 2026-08-16
Rated 5 out of 5 by from Great quality bar faucet. Quality product. Looked in the local Home Centers but they seem to go for style & price, not quality. Installation was simple and everything I needed was in the box.
Date published: 2026-07-15
Rated 4 out of 5 by from Attractive faucet but with some concerns Bought this faucet to go with our new Blanco Diamond White sink. Attractive faucet with excellent spout reach. Functionally it works very well but I am surprised the water volume is not a bit more robust. Also, I am surprised that to make the hose connection between the supply and faucet requires an extra (supplied) retainer clip rather than having secure connections at the onset. I've never seen this before and in reviews I have read elsewhere, say the retainer clip can pop off on its own which is very concerning. I hope that does not happen. Finally, the installation instructions (and I have seen many in my lifetime) could have been way better.
Date published: 2026-06-29
Rated 5 out of 5 by from Worked Well The perfect replacement for our kitchen faucet
Date published: 2026-04-14
Rated 5 out of 5 by from Happy with this purchase. So far so good. only been using it for a couple weeks now, but so far it's been great. Went from a two handle to a single handle and the operation of this Faucet is very easy to use. Seems very well made & looks great. A friend installed it for me, which he said was an easy installation.
Date published: 2026-02-25
Rated 5 out of 5 by from Looks and functions as advertised. Love the look of the faucet as well as the function. Works very well and would buy again.
Date published: 2025-12-03
Rated 5 out of 5 by from Looks great! The kitchen faucet looks great an functions as it should. No complaints.
Date published: 2025-11-25
Rated 5 out of 5 by from Kitchen faucet Nice height. Like the lookThe only thing is one has to watch to move it all the way to the top to fully close. Other than that, it works good
Date published: 2025-11-22
  • y_2026, m_9, d_14, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_294
  • loc_en_US, sid_9913-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 54ms
  • reviews, product
Q&A

Does the spray head automatically retract or do you have to push it back up?

Saw a comment on Houzz that it did not retract.
Asked by: Anita
Hose doesn't seem to automatically go back into position, but goes easily with a strong magnet type feeling when it get close.
Answered by: Spydergirl
Date published: 2024-03-28

Is there a similar faucet that will fit in a 2” countertop hole?

Asked by: Stridertjs
Tanya, I meant a 2” diameter hole.  This faucet requires a hole size of 1.25 to 1.5 inches, but the hole in my granite countertop is 2 inches. 
Answered by: Stridertjs
Date published: 2024-03-28

hot/cold? and direction

Does this bar faucet dispense hot and cold water? Does the lever only go in one direction or does pulling forward give hot water and pushing backwards give cold water ? Thank you!
Asked by: Linda
Thank you for your question, Linda! This faucet dispenses hot and cold water. The handle operates by tilting away from the faucet to turn on. The vertical position gives cold water and rotating the handle forward provides hot. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

How do you install the cartridge

Asked by: Peggy
Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. You will need a 1/8" allen wrench to remove the handle assembly. Please be sure to turn off the water at the shut off valve before removing the handle. You may also need an adjustable wrench to loosen the bonnet nut around the valve cartridge assembly. Once the bonnet nut is removed, the cartridge will slide out. Check the valve body for debris then insert the new cartridge, screw on the bonnet nut and please be sure not to over-tighten the bonnet as we recommend tightening a 1/4 turn to a full turn past finger tight. Then attach the handle with the set screw and this repair is complete. Turn on the shut off valves below the counter slowly and test to make sure the water flows correctly. If you have any questions, please contact us directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there an optional aerator for 1.0 gpm

Asked by: Samuel
Thank you for your question, Samuel! Model 9113-DST does not have a removable or replaceable aerator option. The flow rate can be reduced; however, by simply turning down the shut-off supplies slightly below the counter. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Can this faucet be adjusted for hotter water?

Asked by: Maren
Hello! No, there is no adjustment that can be made to increase temperature. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-12-30

Can Essa faucet be offset with d shape sink?  And is the exact product wherever it’s purchased from?

Asked by: Sharjane
H, Sharjane! We appreciate your interest in Delta faucets. All Delta faucets feature the same quality parts, materials, and workmanship, no matter what kind of dealer sells them. Here is a link to the technical specifications sheet to make sure this works for your sink set up: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST_A.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Hole size in counter required for 9913-ar-dst

Asked by: Robert
Thank you for your question, Robert. The hole size should be 1 1/4" to 1 1/2". Please see the Technical Specifications for more information. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-07-18

How long should batteries last

Asked by: BobF
Hi, BobF! Thank you for your question. For the Delta 9113T-DST Faucet and all of our Touch2O Faucets, use 6 AA (included) with a battery life of approximately 1 year or 6 C (not included) with a battery life of approximately 3 years. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what size hole in counter top?

Asked by: bob b
Hi, Bob B! Thank you for your question. The hole size should be 1 1/4" to 1 1/2" (32 mm to 38 mm) for the Delta 9113-AR-DST faucet. Here is a link to the technical specifications sheet for further measurement for the faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20B.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the handle be on either side of the faucet ? Essa Single-Handle Pull-Down Sprayer Kitchen Faucet with MagnaTite Docking in Arctic Stainless

Asked by: Kirkline
Hi, Kirkline! Thank you for your question. We recommend installing this faucet with the handle on the right. You may install it with the handle on the front or left side, but the temperature adjustment will be opposite of the standard operation for single handle faucets. You could compensate for this by swapping the hot and cold supply lines under the sink. However, the red/blue button on the handle will no longer indicate the correct temperature. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the faucet be installed with the handle facing forward

Can the faucet be installed with the handle facing forward and not to either the right of left?
Asked by: Marty
Hi Marty, Thank you for your question! The faucet is designed to have the handle installed on the right. It could be installed with the handle on the front, but it will only rotate to the left from the 12 o'clock position. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Soap Dispenser

Is there a particular soap dispenser model that goes with the 9113 faucet model?
Asked by: griega99
Hello Griega99, Thank you for your question! The RP1001 is the soap dispenser listed on the parts diagram of this faucet. However, we encourage our customers to get what they think looks best in their home. Here is a link to all available Delta soap dispensers: http://www.deltafaucet.com/kitchen/accessories/filter-results.html?sort=pricehighlow&type=type-kitacc-soapdispenser&function=kitchen-accessories I hope this helps!
Answered by: DeltaFaucet9
Date published: 2024-03-28

Is it possible to install the controls on the left?

Asked by: Nancy
Hi Nancy, Thank you for your question. The unit is designed for the handle to be installed on the right side. Reversing the faucet will cause the handle to rotate backwards. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

how long is the hose? Is there any reason not to use this faucet at the main kitchen sink?

Asked by: plaza
Hello Plaza, Thank you for your question. The Delta Essa Bar/Prep 9913-AR-DST model has a 62" hose assembly. This model can be used/installed as a kitchen faucet, it just smaller than the kitchen version. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Does this bar faucet swivel side to side in case you need to push it out of the way to make more room in your sink for a taller item? Also do you have to keep the button pressed down in order to keep it on a different spray mode?

Asked by: Nili
Hi, Nill! Thank you for your question. The Delta 9913-DST faucet spout rotates 360˚. The toggle button on the sprayer does not need to be kept pressed down. The button will stay pressed down after the button is released. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can you swing the on/off handle all the way to cold and then turn on the water or does the water come on as soon as you move the handle When turning off the water do you have to bring the handle back to center or can U turn the water off from any position

Asked by: vista9
Hi, Vista9! Thank you for your question. The handle for the Delta 9113-AR-DST will need to be in the center to turn the water off. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Where does the required 1.5" backsplash clearance measure from? Is it the center of the fixture or the exterior of the fixture?

Asked by: Scott
Dear Scott, Thank you for your inquiry! The recommended distance for the Delta Essa kitchen 9113-AR-DST faucet, is min. 1 1/2" (38 mm) clearance to the Back Splash. Please view the link below for the Technical Specifications for the faucet. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2017-03-07

Can this faucet be mounted on a stainless steel sink or must it be deck mounted?

Asked by: Cappy
Hi Cappy, Thank you for your question. The Delta Essa Kitchen 9113-DST faucet can be installed on any standard sink or countertop material with a maximum deck thickness of 2 1/2". However, we do recommend to use the RP37490 Stabilization Plate if installing on a thin gauge metal sink, to help prevent it from flexing. This plate goes under the sink and can be installed as is or cut to fit. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

can the flow rate be changed to 2.2 gpm? thanks.

Asked by: d7e
No, The flow rate is internally fixed in the diverter. There is no external module connected to the spray hose feed.
Answered by: Jim36548
Date published: 2024-03-28

Does the Essa kitchen faucet have the new Shieldspray feature?

Asked by: Kan12
Hi, Kan12! Thank you for your question. The 9113-DST does not have the new ShieldSpray Technology. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Can the Essa bar prep faucet be used as a cold water faucet only connected to an under sink water filter? The water filter is not an RO type.

Asked by: jomo
Thank you for your question, jomo! This bar prep faucet is not recommended to be used with a filtered system. We would recommend a beverage faucet as they have only one supply line and are designed to be a cold water dispenser only. These models are designed to compliment various collections and can be used with filtered or Reverse Osmosis machines. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does this faucet swivel? It will be installed between two sinks and I don't like to use the pull down to fill a sink. I like to move it between the two sinks without the pull down

Asked by: JMR1
Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. The high-arc, gooseneck design on model 9113-AR-DST swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-11-15

Installing Delta faucet 9113-DST. There's a round plastic part in box (gasket?) that instructions/parts list doesn't mention. What is this? Also, does it matter which direction I orient the mounting plate or can it go either way?

Asked by: Lisa
Hi, Lisa. Thank you for your question. The round plastic part is a gasket that Delta 9113-DST Faucet. This gasket goes inside of the base of your faucet. The round hole should go around the mounting shank, and the hoses should go through the other hole. The mounting hardware should only be able to be oriented one direction. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what is the single hole faucet dimension?

Asked by: andy
Thank you for your question, Andy. Please refer to the Technical Specifications linked below. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-11-29

Is the pull down hose material metal or mesh?

What material is the hose made of - metal or mesh. A mesh hose is quieter. Just curious.
Asked by: SusanM
Hose is a black mesh.
Answered by: Spydergirl
Date published: 2024-03-28

Can the escutcheon plate be modified for a two or one hole installation?

The escutcheon plate appears to be designed for three holes, since it has two threaded cylinders that appear to be designed to fill the two additional holes adjacent to the main faucet hole. In my installation, I need to cover one additional hole that is currently used for a soap dispenser. Can the escutcheon plate be modified for such an installation? Thank you, Mark
Asked by: Mark
Hi Mark, Thank you for your question. We do not recommend to modify the base plate. You may use a matching soap dispenser or hole cover to fill the second hole. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-09

I think my Essa faucet has the hot and cold reversed. If the faucet is pulled all the way forward - toward the blue, but with the red showing - should that be hot or cold? If pushed all the way back, to red, but with blue showing, should that be cold?

Asked by: Lisabeth
Hi, Lisabeth! Thank you for your question. The Delta 9113-DST Faucet handle does rotate out, and away from the faucet body, for on and cold water. Rotate the handle forwards, towards the user, for hot water. If the supply lines are reversed, this will be opposite. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

We have particles in our water and periodically need to remove the screens to clean them. Can we easily remove the screens on the pull down kitchen f

Asked by: DiannaB
Dear DiannaB, Thank you for your question. The Delta Essa kitchen 9113-AR-DST doesn't have a removable aerator. You would soak the whole wand in a 50/50 mixture of white vinegar and tap water for about 30 to 45 minutes to loosen and flush out any debris or particles. Best regards, Tanya
Answered by: Tanya
Date published: 2017-03-07

Whats the difference between a kitchen faucet and a prep faucet??

Asked by: home owner
Hello Home Owner, the difference between the Delta Essa kitchen and bar/prep faucets is the height and reach of the spout assemblies. The Bar/Prep 9913-DST faucet is smaller in size than the kitchen 9113-DST standard kitchen faucet. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2026, m_9, d_15, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_391
  • loc_en_US, sid_9913-BL-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 58ms
  • questions, product
PART LIST

PART LIST

Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP80525

Essa®

Essa® Metal Lever Handle Kit

List Price: $60.75 - $98.45
Free Ground Shipping All Orders $49+

RP80525

Image-Master-RP70714

Essa®

Essa® Escutcheon w/ Baseplate & Nuts

List Price: $62.65 - $113.15
Free Ground Shipping All Orders $49+

RP70714

Image-Master-RP80524

Essa®

Essa® Spray Assembly - Pull-Down

List Price: $82.40 - $115.30
Free Ground Shipping All Orders $49+

RP80524

Image-RP80528

Delta®

Delta® Gasket

List Price: $20.90
Online Price: $16.72
Free Ground Shipping All Orders $49+

RP80528

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-Master-RP80520

Essa®

Essa® Spout Assembly - Kitchen

List Price: $115.30 - $167.80
Free Ground Shipping All Orders $49+

RP80520

Image-RP47888

Allora®

Allora® Soap / Lotion Dispenser - Body Assembly

List Price: $16.60
Online Price: $13.28
Free Ground Shipping All Orders $49+

RP47888

4.06 18
Image-RP80523

Delta®

Delta® Hose Weight Assembly

List Price: $53.40
Online Price: $42.72
Free Ground Shipping All Orders $49+

RP80523

Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2
Image-RP80522

Delta®

Delta® Hose Assembly

List Price: $91.00
Online Price: $72.80
Free Ground Shipping All Orders $49+

RP80522

5.00 1
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.