Essa®
View Full Essa® Kitchen Collection

Single Handle Pull-Down Bar / Prep Faucet in Matte Black

Model#: 9913-BL-DST
Add to Favorites
Find local Delta® installers.
Essa®
View Full Essa® Kitchen Collection
Single Handle Pull-Down Bar / Prep Faucet in Matte Black
Model#: 9913-BL-DST
List Price: $52800
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14.5
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 514ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'SocketTimeoutException:Read timed out';
Q&A

ESSA MODEL 9113-AR-DST. Is the EXTERIOR of the pull-down spout METAL or PLASTIC? None of my local stores have it on display. Just spoke to Delta Customer Service, who told me it is metal, but I am reading online that it is "non-metallic". Please clarify.

Asked by: Rella
Hi Rella, thank you for contacting Delta Faucet Company! Our wand assemblies are non-metallic. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have 2 MODEL#: 9913-RB-DST faucets. one in the kitchen never gets as hot as the faucet in the laundry room (or any other fixture). I have flushed the supply lines as suggested in another Q&A. Is there a limit stop on this faucet? other suggestions?

Asked by: MIkeOC
Hello MIkeOC, Thank you for your question! I am happy to help you! Our Delta 9913-RB-DST does not have a temperature limit stop, However, I recommend turning off both hot and cold shut off. Then make sure the water heater temperature is set to 120 or lower, When turning back on the hot and cold please open them equally to prevent crossflow. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Does this faucet come with an escutcheon plate? Or do I need to order one seperatly? If so can yo please provide the number?

Asked by: Cinthia
Hello Cinthia! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta ESSA® Single Handle Pull-Down Kitchen Faucet MODEL#: 9113-DST does not come with the escutcheon but can be ordered separately. The part number is RP70714. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Does this model come in Brush Nikel?

Asked by: Tom B
Hi Tom B, Thanks so much for contacting Delta Faucet Company! Unfortunately, the ESSA® Single Handle Pull-Down Bar / Prep Faucet MODEL#: 9913-DST does not come in Brushed Nickel. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-27

I purchased two of these faucets and need to replace the heads on both due to slow flow. I have tried to clean the outward flow area from the outside with little benefit.

Asked by: S Pf
Hi S Pf, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-02-08

I have the D9113TARDST .... this is the one WITH touchless ..... I need NO TOUCHLESS ..... is that item D9113ARDST ?

Asked by: David W
Hello David W, Thank you for contacting us, I am happy to help you. Our Delta touch faucets are identified with a T, the model you would be searching for is 9113T-DST. Please see the link below. https://www.deltafaucet.com/kitchen/product/9113T-DST Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Is there any method to adjust the hot/cold mix?? The water from the faucet gets warm but not real hot. Bathroom gets real hot! any help would be appreciated. Thanks

Asked by: Michael

I have a Delta 9113-AR-DST in the arctic stainless. It has a small scratch in the neck of the faucet. Is there any way to remove that scratch? Thanks.

Asked by: Joan
Hello Joan, Thank you for your question! I am happy to help you! The is no recommendation of removing a scratch from the Delta Faucet ESSA® Single Handle Pull-Down Kitchen Faucet MODEL#: 9113-AR-DST. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Can the aerator be removed and cleaned? Is there a special tool?

Asked by: Gg27
Hi Gg27, Thank you for contacting Delta Faucet Company! The aerator on our 9113-DST cannot be removed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-06-28

very low pressure on hot side ok on cold help

Asked by: linda
Hi, linda! I apologize that you are having low flow on the hot side. I will happy to help. Please watch for an email from me with more information. Please contact us directly with any further issues or questions. Best Regards, James
Answered by: Delta7
Date published: 2024-03-28

how tall is this faucet. I have a minimum height clearance of 17 inches

Asked by: randy
Hello Randy! Thank you for your question. The overall height of the model 9913-DST is 15 3/4 inches. Best regards, Shontay
Answered by: affsvc
Date published: 2024-03-28

Can the spray head be changed?

Asked by: Anonymous
Hi JimByr, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Essa® Single Handle Pull-Down Kitchen Faucet In Arctic Stainless MODEL#: 9113-AR-DST wand can be purchased separately, but they are model specific and is the only one that would fit properly. Please see the link below to the wand assembly RP80524. https://www.deltafaucet.com/parts/product/RP80524.html Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

I purchased this faucet a year ago and now the water does not come out with pressure. It worked fine for a little over a year. I removed the part and cleaned it out and put it back. It still doesn’t work. Can I possibly get a new sprayer part

Asked by: Kathie
Hi Kathie, Thanks so much for contacting Delta Faucet Company! It is possible that a flush could resolve this issue with the ESSA® Pull-Down Kitchen Faucet MODEL#: 9113-DST. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the fully open middle position, and then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and repeat with the second line. If this does not help, please let us know. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-04-17

My newly built home has the 9113-AR-DST faucet. There is an exposed 'hole' where the set screw is installed. Is there supposed to be a 'Delta Emblem" in there. The Deltas I had in my previous home had the Red/Blue Delta Emblem.

Asked by: Vero
Hi Vero, Thanks so much for contacting Delta Faucet Company! No, the ESSA® MODEL#: 9113-AR-DST does not have a red/blue button cover for the set screw. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I just had my Delta 9113-DST Essa installed and the flow rate for the hot water is much less than for the cold. Is that the way it was designed?

Asked by: susie
Hello Valued Customer, Thank you for contacting Delta Faucet Company! When water heaters are replaced or when the water is shut off debris can flow through quickly when water is turned back on. With the issue that you are experiencing, the faucet will need to be flushed. Please refer to the information below to flush your faucet. Please also keep a close eye on the flow coming out of each point you flush and if it is low please reply to this e-mail. Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-03-18

The spray seems adequate to remove rust from a car bumper. Is there any way to back it down, its getting us wet? The handle is too sensitive to use to do so regularly. CAN I BUY THE OTHER MODEL HEAD THAT IS 3 SPRAY PATTERNS AND SWAP THEM?

Asked by: DENNIS
Hi DENNIS, Thanks so much for contacting Delta Faucet Company! Unfortunately, model 9113-DST only offers the main RP80524 wand assembly. Installing a different wand may cause docking issues with the spout. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Are all the components of this faucet metal? Our past faucets have *looked* metal online, but end up to be plastic made to have a metal finish. So, I would like to know if both the body/spout/neck portion AND the sprayer head are actual metal. Thank you!

Asked by: Kristen
Hi Kristen, Thank you for your question about the Delta Faucet model 9113-BL-DST. Not all parts of the faucet are metal. Nonmetallic parts are used to ensure a long-lasting, high-quality product. The pull-down spray wand is made of plastic or a plastic mixture. Metal is heavier, susceptible to corrosion, and retains heat. Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2026-02-26

Where is this made? If not made in China, are components made in China?

Asked by: Marboo
Hi Marboo, Thanks so much for contacting Delta Faucet Company about your 9113-AR-DST! As a global manufacturer, we source and assemble several parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Hi there! I’ll be replacing my existing kitchen faucet in my motorhome with the bar/prep faucet. Is there a matching 10” deck plate I can order to go along with this faucet?  My current set up: 3 holes, total 8-inches apart, will need 10-inch plate.Thanks

Asked by: Dolly
Hello Dolly, Thank you for question! We are pleased to assist! The Delta ESSA Single Handle Pull-Down Bar/Prep Faucet does have an optional escutcheon available. Here is a link to the technical specifications sheet to show the dimensions with the escutcheon plate: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20B.pdf Please feel free to contact back us for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

Where is the battery pack located

Asked by: Nevart
Hi Nevart, Thank you for your question. Model 9113-DST does not have Touch2O® Technology so it does not have a battery pack. Model 9113T-DST is a Single Handle Pull-Down Kitchen Faucet with Touch2O® Technology. I have provided the link below providing information regarding that model. https://www.deltafaucet.com/kitchen/product/9113T-DST Best Regards, Simone
Answered by: Simone
Date published: 2024-03-28

Is there only one model of this unit? I understand that there can be a slightly different version made for the big box store which generally contain more plastic fittings rather than brass. I am seeing a large variance in price between big box and others

Asked by: Andyman
Hello Andyman, Thank you for your question regarding Delta Faucet 9113-DST! We apologize this information is not readily available to you, we will be happy to help! The Delta Faucet 9113-DST is the only model of its kind, however, it is part of a collection named Essa. We appreciate your inquiry and look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-03-28

For the 9113-AR-DST faucet, which lever position is for hot water, toward me or away from me (towards the wall)?

Asked by: DeltaFan
Hi Valued Customer, Thank you for your question. Pulling the Delta 9113-DST Faucet handle out and away from the faucet is the cold position. Pulling the handle forward is the hot position. Closing the handle back to the top, closest to the body of the faucet is the off position. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-03-24

What is the difference in the Emery and Essa?  our contractor estimated the essa, basic model and installed the emery, faucet only. Tell me, quality wise what the difference is between essa and emery models. We don’t like the styling on the emery.

Asked by: Susan615
Hi Susan615, thank you for your interest in the 9913-DST! The faucet's internals is the same. The quality is tested to ensure long-lasting performance. The difference is the style of the faucets. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What deck plate is used with delta faucet 9913-AR-DST

Asked by: Joe N
Hello Joe N! Thank you for contacting us at Delta Faucet! I will be happy to help! This Essa bar/prep faucet utilizes the RP70714 escutcheon. https://www.deltafaucet.com/parts/product/RP70714.html Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Where May we acquire a replacement shower/stream replacement head for Essa Single handle pull-down kitchen faucet?

Asked by: Donald

Does Delta #9913 and #9113 use the same escutcheon plate? Purchased 9913, optional plate says it is 10.25 inches. However my old faucet plate measured 10.5" so the lime deposits won't be covered. Can I use plate for 9913 which says 10.5".

Asked by: Deed
Hello, Deed. Thank you for your question. I am happy to help. The escutcheon is the same for both faucets. Please contact us directly if you have any further questions. Best Regards, James
Answered by: Delta7
Date published: 2024-03-28

What size is the set screw? It constantly falls off and has departed this world, I cannot buy whole replacement handle kits everytime the set screw decides to peace out

Asked by: summoningsetscrews
Hi, Thanks for you question. The RP80525 set screw RP72998 has a thread count of #8-32x.43. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-10-25

Hello! When the Essa faucet is in spray mode, can I reduce the water pressure, like I can when it's on stream mode?

Asked by: alicebird
Hi Valued Customer, Thank you for your question regarding our Delta Faucet. Please refer to the Maintenace and Installation instructions in the link below on page 11 for spray settings. https://media.deltafaucet.com/MandI/106557%20Rev%20G.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-01-17

What is the cartridge part number for the Delta Kitchen Faucet 9113-BL-DST?

Asked by: Den44
Hi Den44, Thank you for your question! For the Delta faucet model 9113-BL-DST, a replacement cartridge is RP73000. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-05-26

What is the difference between the ESSA Touch20 with an escutcheon plate and the one without except for the obvious?  Can the model that comes with the escutcheon be mounted without the escutcheon?  Without any issues?!!

Asked by: Roger
Hi Roger, Thanks so much for contacting Delta Faucet Company! The ESSA® MODEL#: 9113T-DST can be used with or without the escutcheon. The ESSA® VoiceIQ™ MODEL#: 9113TV-DST has VoiceIQ technology. That is the main difference. The Bar Prep Faucet does not come with an escutcheon. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_7, d_25, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_8, bvpage2n
  • co_hasquestionsanswers, tq_383
  • loc_en_US, sid_9913-BL-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 66ms
  • questions, product
PART LIST

PART LIST

1 2 >
Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP80525

Essa®

Essa® Metal Lever Handle Kit

List Price: $60.75 - $98.45
Free Ground Shipping All Orders $49+

RP80525

Image-Master-RP70714

Essa®

Essa® Escutcheon w/ Baseplate & Nuts

List Price: $62.65 - $113.15
Free Ground Shipping All Orders $49+

RP70714

Image-Master-RP80524

Essa®

Essa® Spray Assembly - Pull-Down

List Price: $82.40 - $115.30
Free Ground Shipping All Orders $49+

RP80524

Image-RP80528

Delta®

Delta® Gasket

List Price: $20.90
Online Price: $16.72
Free Ground Shipping All Orders $49+

RP80528

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-Master-RP80520

Essa®

Essa® Spout Assembly - Kitchen

List Price: $115.30 - $167.80
Free Ground Shipping All Orders $49+

RP80520

Image-RP80523

Delta®

Delta® Hose Weight Assembly

List Price: $53.40
Online Price: $42.72
Free Ground Shipping All Orders $49+

RP80523

Image-RP47888

Allora®

Allora® Soap / Lotion Dispenser - Body Assembly

List Price: $16.60
Online Price: $13.28
Free Ground Shipping All Orders $49+

RP47888

4.06 18
Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP80522

Delta®

Delta® Hose Assembly

List Price: $91.00
Online Price: $72.80
Free Ground Shipping All Orders $49+

RP80522

5.00 1
Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.