Single Handle Pull-Down Bar / Prep Faucet in Chrome

Model#: 9913-DST
Single Handle Pull-Down Bar / Prep Faucet in Chrome
Model#: 9913-DST
List Price: $45600
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14.5
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Worked Well The perfect replacement for our kitchen faucet
Date published: 2026-04-14
Rated 5 out of 5 by from Happy with this purchase. So far so good. only been using it for a couple weeks now, but so far it's been great. Went from a two handle to a single handle and the operation of this Faucet is very easy to use. Seems very well made & looks great. A friend installed it for me, which he said was an easy installation.
Date published: 2026-02-25
Rated 5 out of 5 by from Looks and functions as advertised. Love the look of the faucet as well as the function. Works very well and would buy again.
Date published: 2025-12-03
Rated 5 out of 5 by from Looks great! The kitchen faucet looks great an functions as it should. No complaints.
Date published: 2025-11-25
Rated 5 out of 5 by from Kitchen faucet Nice height. Like the lookThe only thing is one has to watch to move it all the way to the top to fully close. Other than that, it works good
Date published: 2025-11-22
Rated 5 out of 5 by from Best design and instant upgrade to your kitchen. Beautiful design. Instant upgrade to the look of my kitchen. Easy to clean. Delivers a steady stream of water. The pull down is a great feature which allows clean up to be a breeze. The controls are easy to manage. I also bought the soap dispenser which adds to the design. It was installed by my plumber who highly recommended Artic Steel due to its beauty and smug proof design. I am so pleased with this faucet. I needed to replace my Delta faucet after 20 years it was time for it to retire.
Date published: 2025-11-19
Rated 5 out of 5 by from Beautiful and functional! It's beautiful, sturdy and functional! We ordered it for our bar with a small sink. Being able to pull the sprayer out to get hard to reach places without getting the whole bar wet is huge!
Date published: 2025-09-11
Rated 2 out of 5 by from Terrible Sprayer An otherwise nice kitchen faucet with a terrible sprayer. Although the sprayer appears to have an aerator it is not replaceable and does not aerate at all. All it does is splash everything after bouncing the water stream off of the bottom of the sink.
Date published: 2025-07-18
  • y_2026, m_6, d_10, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_291
  • loc_en_US, sid_9913-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
Q&A

does the spray or stream lock when pushing button or do you have to hold for continuous spray?

Asked by: tribeca
Thank you for your inquiry, Tribeca! The spray and stream features of the Delta Essa Bar/Prep 9913-DST faucet will stay engaged until the button for the other feature is pressed. You do not have to hold the button for the selected features. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Does this faucet have poly tubes for hot and cold water supply? My plumber said the faucet should have braided flexible hot and cold supplies not poly supplies. So before I return this faucet, can you please tell me if they are poly tubes. Thank you.

Asked by: Caryl
Hi, Caryl! Thank you for your question. The Delta 9913-DST faucet has InnoFlex PEX hot and cold supply lines. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Can the handle be installed on the left side?

Asked by: Rlon
Dear Rion, Thank you for your question. The unit is designed for the handle to be installed on the right side. Reversing the faucet will cause the handle to rotate backwards. Best regards, Tanya
Answered by: Tanya
Date published: 2017-03-18

How to choose between standard and bar/prep sizes?

Hi, I am renovating a kitchen and putting in two sinks, one of which will be a Franke TCX110-18 in a kitchen island. I am trying to decide which faucet will be a better fit for this sink, the 9113-DST (standard) or the 9913-DST (bar/prep). Can you please advise which version of the faucet would be suitable for this sink? The sink's inner dimensions are 16x18" so I am wondering if the bar/prep faucet might be too small. Do you have any guidelines on how to choose between the standard and bar/prep faucets?
Asked by: gosko
Dear Gosko, Thank you for your inquiry! The Delta Essa Pull-Down Kitchen and Bar/Prep faucets will both work for your faucet install. It would be your own personal preference of the size you would need for the install. Please see below, the Technical Specification document for both faucets for further assistance. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

how large of hole needs drilled in my countertop for my Single Handle Pull Down Bar Faucet, single hole.  Is 32mm sufficient or 1.25 inches?

Asked by: Steve
Hi, Steve! Thank you for your question. The Delta 9913-DST faucet hole size can be between 1 1/4" to 1 1/2" (32 mm to38 mm). Here is a link to the technical specifications sheet for further measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I just received my black delta essa pull down kitchen faucet, and i have noticed that the pull down nozzle head of the faucet is made of plastic. is there a specific reason for this?

Asked by: shana
Hi, shana! Thank you for your question. Our Delta kitchen sprayer assemblies are made of plastic due to safety issues so as hot water goes through metal, we recommend to not touch the metal as it may scald skin. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. If you have any questions or need help, please feel free to contact our customer service department at 1-800-345-3358 or email us at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

What is the difference between the Delta Essa 9113T-ar-dst and the 9913T-ar-dst ?  Thanks!

Asked by: Chaz
Thank you for your question, Chaz! Delta model 9113T-AR-DST is a Touch activated single handle kitchen faucet. Model 9913T-AR-DST is the shorter Bar Prep version of this faucet but is not Touch activated. Both models are featured in the Arctic Stainless finish. https://www.deltafaucet.com/product-comparison?modelNumber=9113T-AR-DST&modelNumber=9913T-AR-DST Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Will the sprayer stay on without having to hold the button down

I'm considering your bar/prep faucet and a similar one by Moen. On the Moen faucet it apparently requires the button to be held or pressed constantly to keep the sprayer on. I prefer to be able to press the button once and keep the sprayer going and then press it again to return to a stream. How does yours work?
Asked by: Strangebru
Hi Strangebru, Thank you for your question! The button on the model 9913-DST single handle bar/prep faucet will stay diverted to the mode you put it on. It will not switch unless you press it again. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

I am looking for a cold filtered water faucet to put along side my main sink cold/hot water faucet.  Would the Essa bar/prep faucet be a good choice for this. I would like the faucet to match the Essa Single Handle Pull-Down Kitchen Faucet.

Asked by: jomo
Thank you for your question, jomo! The Essa Bar Prep faucet would work as a matching cold or hot water faucet but is not recommended to be used with a filtered system. We do offer beverage faucets that have only one supply line and are designed to be a cold water dispenser only. Although there is not an "Essa" beverage faucet, they are designed to compliment various styles and collections. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

I am planning to buy Delta faucet 9913 DS or 9113 DS. It has 1.8 gpm. We have very poor water pressure. Can I replace that aerator with one that will give me more gpm?

Asked by: SusieQ
Hi, Susie80! Thank you for your question. We do not have an aerator with a greater flow rate for this Delta 9913-DST faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How do you replace the batteries

Asked by: Kathy
Hi, Kathy! Thank you for your question. The Delta 9913T-DST Bar / Prep Faucet with Touch2O® Technology batteries can be replaced by removing the top lid off of the battery pack, under the sink. Once the lid is off of the battery pack, the battery case holder can be pulled straight out from the pack. Replace batteries as needed. This is shown on page 8, on the Maintenance and Installation Guide, here: https://media.deltafaucet.com/MandI/92519%20Rev%20K.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what is the difference between Delta 9913-dst and 9113-dst?

Asked by: Bo
Hello Bo, Thank you for your question. Delta model 9913-DST is a bar/prep faucet while model 9113-DST is a standard size kitchen faucet. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-12-02

Would like to see the 3 hole faucet Essa.

Asked by: Jo Ann
Hi, Jo Ann! Thank you for your question. Unfortunately, we do not have a photograph of the Delta 9913-DST Faucet with the escutcheon plate. Here is a link to the technical specifications sheet to show the dimensions with the escutcheon plate: https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20B.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Delta Faucet Essa Single-Handle Kitchen Sink Faucet with Pull Down Sprayer and Magnetic Docking Spray Head, Arctic Stainless 9113-AR-DST vs D9113DST, my question is are the different product codes different products? If so what are differences. Thanks

Asked by: Steve
Hi Steve, Thank you for your question. The Delta Essa Kitchen Pull-Down 9113-DST (Chrome) and 9113-AR-DST (Arctic Stainless) are the same exact faucets, just different finish colors. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Does the sprayer of the 9113 ar dst stay in spray mode at very low flow rates? Which Delta models are best at staying on spray at very low flow and not switching back to regular flow at low flow rates?

Asked by: Keith
Hello Keith1! Thank you for your question regarding the Delta 9113-AR-DST! I am happy to help. The sprayer settings for the Delta model 9113-AR-DST are controlled by a switch that is on the wand. Even at low pressure, the sprayer will not change settings unless it is switched. Please reach out to us directly if you need further assistance. Best Regards, Antoine
Answered by: Delta Faucet
Date published: 2024-07-02

Is the hose compatible with New Zealand Standard? If not, would i be able to get compatible hoses for this faucet? thanks

Asked by: Mauricio
Hello Mauricio, Thank you for your inquiry! The Delta Essa Pull-Down Kitchen 9113-DST faucet come with only the RP80522 hose and clip assembly. There are no other pull-Out hose assemblies made for this unit. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Is the 9113 DST model the same in a big box store and a plumbing supply store? Are there differences in the materials used in the manufacturing?

Asked by: Gail
Hi Gail, Thank you for your question! When comparing the same model, all faucets will be the exact same, regardless of where they are sold. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-24

what size hole in the countertop is required for this fixture?

Asked by: paul
Dear Paul, Thank you for your inquiry! The Delta Essa Kitchen Pull-Down 9113-AR-DST faucet requires 1 1/4" to 1 1/2" (32mm to 38mm) hole size. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20A.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Do you have to hold the button to make it spray or can you just push it to the spray mode and it will stay like that until you press it again.  This question is for the Essa and Leland models. 

Asked by: Donna
Thank you for your inquiry, Donna! The button on the wand/sprayer assembly of the Delta Essa and Leland Pull-Down kitchen faucets remain in set mode (stream or spray) until it is pressed into the other mode. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Installation with soap and dishwasher air gap?

With the 9113-AR-DST installed in a standard 3 hole sink where the left hole is for soap, center for faucet and right for dishwasher air gap with the air gap that is 4" away from center of the faucet and 2" high get in the way of the handle operation for the 9113-AR-DST?
Asked by: Ron
Hi, Ron! Thank you for your question. There should be no problem with the handle hitting the air gap. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-04-21

Can the aerator on this faucet be changed? Using this faucet with a point of use water heater which only works at a flow rate of 0.5 GPM. A flow restricting aerator is provided with the unit.

Asked by: schillingtm
Hi, schillingtm! Thank you for your question. The 9113T-DST sprayer assembly should have a 1.8 gpm flow rate. If you are getting 0.5 gpm, we recommend to clean the sprayer by soaking this in a solution of 50% white vinegar and 50% water solution. You may soak for an hour or even overnight to clean. If this does not fix the issue, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

What does spout length mean? Also, how long is the hose for pull out?

Asked by: Lynn
Hello Lynn, Thank you for your inquiry! The Delta Essa Kitchen 9113-DST faucet has a spout length/extension of 9-1/4". The hose is 62". Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

does the Delta 9113-DST have a temperature inhibitor?

Asked by: Michael
Hi Michael, Thank you for your question. The Delta Essa Pull-Down Kitchen 9113-DST faucet is not designed with a temperature indicator. This unit does have a hot and indicator on the handle. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

will this model fit a 13/8" hole that is on my granite top?

Asked by: diane77
Thank you for your question Diane77! Yes, the Delta 9113-AR-DST, will fit your 1 3/8" counter top hole. https://media.deltafaucet.com/SpecSheet/DSP-K-9113-DST%20Rev%20B.pdf Best Regards, Christina
Answered by: DeltaFaucet7
Date published: 2024-03-28

Where can I find the list of codes for the electronics in the faucet? Ours is flashing RED 3 times, then BLUE. The faucet is in a new construction house, so we didn’t get any of the manuals and I can’t find anything on your site related to the electricals

Asked by: damianshaver
Thank you for your question, damianshaver! Three blinking red lights will indicate that the batteries will need changed. Information on this model can be found in the maintenance and installation manual for the touch version of this faucet on page 12 and I will include a link below for reference. https://media.deltafaucet.com/MandI/92519%20Rev%20H.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

How does arctic stainless steel finish compare to a brushed stainless steel?

Sink is brushed stainless steel (satin). Was wondering if the arctic stainless is also a brushed or shiny finish? Thanks!
Asked by: K
Hi K, Thank you for your question. Arctic Stainless is a brushed finish. Over the years, the color of stainless steel used on appliances and sinks has migrated from warmer tones, with more red in the color spectrum, to lighter tones where blue is more predominant. Arctic Stainless features cooler metallic tones, following a trend seen throughout the kitchen. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Reg. faucet mounting options Mdl. (9113-AR-DST)

I have an stainless steel drop in from top sink, no deck/counter top to mount faucet too. Can this faucet be installed directly to the thin metal sink with included install kit installed directly to the underside metal of sink? Faucet Mdl. 9113-ar-dst Thank you for your help in advance Zeke
Asked by: Zeke
Thank you for your question, Zeke. You may install this faucet onto a metal sink. However, we do recommend to use the RP37490 Stabilization Plate if installing on a thin gauge metal sink, to help prevent it from flexing. This plate goes under the sink and can be installed as is or cut to fit. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP37490 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-12-26

does it have a stainless disk/washer rather than ceramic?

Heard ceramic gives out, newer stainless is better?
Asked by: Barbara
Hi Barbara, Thank you for your question! The RP73000 cartridge for the 9113-DST is a ceramic euro motion cartridge. Rather the unit has a ceramic cartridge or not it is built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

We are considering the Mod. 9113AR-DSTkitchen faucet. However we have heard that the faucet doesn't stay in a fixed position when the water is on. ??

Asked by: dot
Dear Dot, Thank you for your question. The spout assembly of the Delta Essa Pull-Down Kitchen 9113-AR-DST faucet is designed to swings 360 degrees. However, this should not happen when the water is turned on. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

My installation is through a quartz countertop through an access hole in the undermount sink. How do I ensure the faucet nut being tightened?

The faucet is the Delta Essa 9113-DST. The countertop is 3cm, quartz and the sink is a Kohler 5818-5U Hartland. Will the nut fit through the sink access hole and sit flush against the countertop underside? Will I be able to tightened the nut using standard tools? There won't be enough room to use a sink wrench. Thank you.
Asked by: Living With Interest
Hi Living with interest, Thank you for your question! The maximum deck thickness for the 9113-DST is 2 1/2". There is no extension kit or different wrench available. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28
  • y_2026, m_6, d_10, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_380
  • loc_en_US, sid_9913-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 9ms
  • questions, product
PART LIST

PART LIST

Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-Master-RP80525CZ

Essa®

Essa® Handle

List Price: $60.75 - $98.45
Free Ground Shipping All Orders $49+

RP80525CZ

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-Master-RP80524CZ

Essa®

Essa® Sprayer

List Price: $82.40 - $115.30
Free Ground Shipping All Orders $49+

RP80524CZ

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP70714

Essa®

Essa® Escutcheon w/ Baseplate & Nuts

List Price: $62.65 - $113.15
Free Ground Shipping All Orders $49+

RP70714

Image-RP80528

Delta®

Delta® Gasket

List Price: $20.90
Online Price: $16.72
Free Ground Shipping All Orders $49+

RP80528

Image-Master-RP80520

Essa®

Essa® Spout Assembly - Kitchen

List Price: $115.30 - $167.80
Free Ground Shipping All Orders $49+

RP80520

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-RP80523

Delta®

Delta® Hose Weight Assembly

List Price: $53.40
Online Price: $42.72
Free Ground Shipping All Orders $49+

RP80523

Image-RP47888

Allora®

Allora® Soap / Lotion Dispenser - Body Assembly

List Price: $16.60
Online Price: $13.28
Free Ground Shipping All Orders $49+

RP47888

4.06 18
Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP80522

Delta®

Delta® Hose Assembly

List Price: $91.00
Online Price: $72.80
Free Ground Shipping All Orders $49+

RP80522

5.00 1
Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.