Essa®
View Full Essa® Kitchen Collection

Single Handle Pull-Down Bar / Prep Faucet in Chrome

Model#: 9913-DST
Add to Favorites
Find local Delta® installers.
Essa®
View Full Essa® Kitchen Collection
Single Handle Pull-Down Bar / Prep Faucet in Chrome
Model#: 9913-DST
List Price: $45600
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14.5
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Worked Well The perfect replacement for our kitchen faucet
Date published: 2026-04-14
Rated 5 out of 5 by from Happy with this purchase. So far so good. only been using it for a couple weeks now, but so far it's been great. Went from a two handle to a single handle and the operation of this Faucet is very easy to use. Seems very well made & looks great. A friend installed it for me, which he said was an easy installation.
Date published: 2026-02-25
Rated 5 out of 5 by from Looks and functions as advertised. Love the look of the faucet as well as the function. Works very well and would buy again.
Date published: 2025-12-03
Rated 5 out of 5 by from Looks great! The kitchen faucet looks great an functions as it should. No complaints.
Date published: 2025-11-25
Rated 5 out of 5 by from Kitchen faucet Nice height. Like the lookThe only thing is one has to watch to move it all the way to the top to fully close. Other than that, it works good
Date published: 2025-11-22
Rated 5 out of 5 by from Best design and instant upgrade to your kitchen. Beautiful design. Instant upgrade to the look of my kitchen. Easy to clean. Delivers a steady stream of water. The pull down is a great feature which allows clean up to be a breeze. The controls are easy to manage. I also bought the soap dispenser which adds to the design. It was installed by my plumber who highly recommended Artic Steel due to its beauty and smug proof design. I am so pleased with this faucet. I needed to replace my Delta faucet after 20 years it was time for it to retire.
Date published: 2025-11-19
Rated 5 out of 5 by from Beautiful and functional! It's beautiful, sturdy and functional! We ordered it for our bar with a small sink. Being able to pull the sprayer out to get hard to reach places without getting the whole bar wet is huge!
Date published: 2025-09-11
Rated 2 out of 5 by from Terrible Sprayer An otherwise nice kitchen faucet with a terrible sprayer. Although the sprayer appears to have an aerator it is not replaceable and does not aerate at all. All it does is splash everything after bouncing the water stream off of the bottom of the sink.
Date published: 2025-07-18
  • y_2026, m_6, d_10, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_291
  • loc_en_US, sid_9913-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

Is there a serviceable part in the faucet that can be replaced that would affect cold water flow only? It seems my supply lines have good pressure, but the cold water flow is very light. The warm water does not seem to be affected. Thanks

Asked by: Barry
Hello! Thank you for contacting Delta Faucet Company! Please refer to the information below to flush your faucet. Please also keep a close eye on the flow coming out of each point you flush and if it is low please reply to this e-mail. Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2026-02-13

Regarding the 9913-BL-DST Essa Pull Down Bar Faucet. Is there a kit available to convert this faucet to touch sensor?

Asked by: David T
Hello David T, Thank you for your question! I am happy to help you! Our Delta Faucet ESSA® Single Handle Pull-Down Bar / Prep Faucet MODEL#: 9913-AR-DST can be upgraded to the touch faucet by purchasing the necessary parts, I have added a list of parts and the link to the parts diagram below. RP92714 EP92546 RP92543 RP78741 https://media.deltafaucet.com/PartsDiagram/DPD-K-9113T-DST.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

I have the 9113-AR-DST faucet. How can I move the on/off handle from the right side to the front like this picture 

Asked by: Essa faucet handle change
Hi Essa faucet handle change, Thank you for your question about the Delta Faucet 9113-AR-DST. The spout swivels 360 degrees, so for a single-hole installation, the faucet hub can be turned to have the handle on the front. If the optional 3-hole escutcheon is used, unfortunately, the faucet hub would not fit on the escutcheon tabs with the handle in front. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-05-06

Is there a way to fix a sprayer head that constantly sets itself in between stream and spray? This faucet has been an issue since we installed.

Asked by: poschspice
Hi, poschspice! Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. Our Delta Faucet Essa® Single Handle Pull-Down Kitchen Faucet In Chrome MODEL#: 9113-DST with a 3 function sprayer returns to position 2 if left in position 1 when the water is turned off. While ShieldSpray® Models return to position 3 when button 1 is released. Please refer to the maintenance and installation guide for more details, I have attached the link below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Kelley
Answered by: Customer Service
Date published: 2024-03-28

Does the spray setting on 9113-DST remain on, even after the water is turned off and then on?

Asked by: Bill

Can I replace the 9113 DST head with another head that I can clean the aerator?

Asked by: Chrys
Hi Chrys! Thank you for your question and we are happy to help. The Delta 9113-DST spray head can only use the RP80524 and the aerator cannot be removed. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2023-03-06

We had to reinstall and we are missing the clip that connects the hose from the faucet and the pull out spray that keeps them from separating. How do I get this part? Thank you

Asked by: Cottage Kitchen
Hi Cottage Kitchen, Thanks for your question regarding 9113-BL-DST! You can purchase RP60911 online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy https://media.deltafaucet.com/PartsDiagram/DPD-K-9113-DST%20Rev%20E.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Purchased the 9113-RB-DST Faucet Using the "single hole" installation.  I feel it needs a "trim ring" that the sits on the sink counter and underneath the faucet itself.  Is one available for this model?  Needs the support and appearance is not the best.

Asked by: Jim A
Hello Jim A, Thank you for your question. We are happy to help! The Delta 9113-RB-DST faucet does not include a trim ring for single hole installation. We recommend RP37490 thin deck aid to provide stiffness to thin gauge sinks if the faucet needs additional support. Please reach out directly if you have any questions or need additional assistance with the faucet installation. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

My faucet it’s being use only for 8 months and the handle fell, I put it back but keep falling. 

Asked by: VPM1
Hi VPM1, Thanks so much for contacting Delta Faucet Company regarding 9113-BL-DST! The set screw for this handle is RP72998 and has a thread count of #8-32x.43. Please contact us directly if you have any questions or need additional assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Water start/stop by touch previously worked on all faucet parts but recently will not work on top piece (curved head).  Why will touch feature work for base/handle but not top?

Asked by: JimJ
Hi Valued Customer, Thank you for your question. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-11-12

Does this faucet come with soap dispenser? Or any extras, as I have three holes to fill. Thanks

Asked by: Pamela
Thank you for your question, Pamela! No, model 9113-DST does not come included with a soap dispenser. However, the RP100736 soap dispenser is the recommended match for model 9113-DST. That soap dispenser would need to be purchased separately. https://media.deltafaucet.com/PartsDiagram/DPD-K-9113-DST.pdf Best Regards, Benjamin
Answered by: Benjamin
Date published: 2024-03-28

Should the hot water turn on when the handle is turned towards you or away from you? Also does the handle only move 25% of the circle? Thank you.

Asked by: jim62
Hello jim62, Thank you for your question! I am happy to help you! Our Delta 9113-DST handle would pull towards you for hot water, and the handle only tilts out for on and cold then moves forward for hot. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Can I replace a pex line? I cut the cold water one by accident

Asked by: Darin
Hi Darin, Thanks so much for contacting Delta Faucet Company! No, the ESSA® Pull-Down Kitchen Faucet MODEL#: 9113-AR-DST PEX supply lines cannot be replaced. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-07

How do you get faucet working after you’ve changed dead batteries?

Asked by: PalHal
Hi Big Daddy, thank you for your interest in the 9113-AR-DST! Our Delta Faucet takes two types of batteries; we would like you to try energizer or name brand (non-Bulk) battery replacements. Another option would be C cell batteries; this can be done by removing the internal battery holder. Another step would be removing the battery box from the battery wire, waiting a full minute, inserting brand-new batteries into the battery box, and then reconnecting the battery box to the battery box wire. Allowing the full minute without the battery box connected will allow time for any remaining electricity in the solenoid to drain, resetting it. We have reached out to you directly via email in regards to this matter also. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

ESSA MODEL 9113-AR-DST. Is the EXTERIOR of the pull-down spout METAL or PLASTIC? None of my local stores have it on display. Just spoke to Delta Customer Service, who told me it is metal, but I am reading online that it is "non-metallic". Please clarify.

Asked by: Rella
Hi Rella, thank you for contacting Delta Faucet Company! Our wand assemblies are non-metallic. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have 2 MODEL#: 9913-RB-DST faucets. one in the kitchen never gets as hot as the faucet in the laundry room (or any other fixture). I have flushed the supply lines as suggested in another Q&A. Is there a limit stop on this faucet? other suggestions?

Asked by: MIkeOC
Hello MIkeOC, Thank you for your question! I am happy to help you! Our Delta 9913-RB-DST does not have a temperature limit stop, However, I recommend turning off both hot and cold shut off. Then make sure the water heater temperature is set to 120 or lower, When turning back on the hot and cold please open them equally to prevent crossflow. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Does this faucet come with an escutcheon plate? Or do I need to order one seperatly? If so can yo please provide the number?

Asked by: Cinthia
Hello Cinthia! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta ESSA® Single Handle Pull-Down Kitchen Faucet MODEL#: 9113-DST does not come with the escutcheon but can be ordered separately. The part number is RP70714. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Does this model come in Brush Nikel?

Asked by: Tom B
Hi Tom B, Thanks so much for contacting Delta Faucet Company! Unfortunately, the ESSA® Single Handle Pull-Down Bar / Prep Faucet MODEL#: 9913-DST does not come in Brushed Nickel. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-27

I purchased two of these faucets and need to replace the heads on both due to slow flow. I have tried to clean the outward flow area from the outside with little benefit.

Asked by: S Pf
Hi S Pf, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-02-08

I have the D9113TARDST .... this is the one WITH touchless ..... I need NO TOUCHLESS ..... is that item D9113ARDST ?

Asked by: David W
Hello David W, Thank you for contacting us, I am happy to help you. Our Delta touch faucets are identified with a T, the model you would be searching for is 9113T-DST. Please see the link below. https://www.deltafaucet.com/kitchen/product/9113T-DST Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Is there any method to adjust the hot/cold mix?? The water from the faucet gets warm but not real hot. Bathroom gets real hot! any help would be appreciated. Thanks

Asked by: Michael

I have a Delta 9113-AR-DST in the arctic stainless. It has a small scratch in the neck of the faucet. Is there any way to remove that scratch? Thanks.

Asked by: Joan
Hello Joan, Thank you for your question! I am happy to help you! The is no recommendation of removing a scratch from the Delta Faucet ESSA® Single Handle Pull-Down Kitchen Faucet MODEL#: 9113-AR-DST. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Can the aerator be removed and cleaned? Is there a special tool?

Asked by: Gg27
Hi Gg27, Thank you for contacting Delta Faucet Company! The aerator on our 9113-DST cannot be removed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-06-28

very low pressure on hot side ok on cold help

Asked by: linda
Hi, linda! I apologize that you are having low flow on the hot side. I will happy to help. Please watch for an email from me with more information. Please contact us directly with any further issues or questions. Best Regards, James
Answered by: Delta7
Date published: 2024-03-28

Can the spray head be changed?

Asked by: Anonymous
Hi JimByr, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Essa® Single Handle Pull-Down Kitchen Faucet In Arctic Stainless MODEL#: 9113-AR-DST wand can be purchased separately, but they are model specific and is the only one that would fit properly. Please see the link below to the wand assembly RP80524. https://www.deltafaucet.com/parts/product/RP80524.html Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

I purchased this faucet a year ago and now the water does not come out with pressure. It worked fine for a little over a year. I removed the part and cleaned it out and put it back. It still doesn’t work. Can I possibly get a new sprayer part

Asked by: Kathie
Hi Kathie, Thanks so much for contacting Delta Faucet Company! It is possible that a flush could resolve this issue with the ESSA® Pull-Down Kitchen Faucet MODEL#: 9113-DST. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the fully open middle position, and then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and repeat with the second line. If this does not help, please let us know. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-04-17

My newly built home has the 9113-AR-DST faucet. There is an exposed 'hole' where the set screw is installed. Is there supposed to be a 'Delta Emblem" in there. The Deltas I had in my previous home had the Red/Blue Delta Emblem.

Asked by: Vero
Hi Vero, Thanks so much for contacting Delta Faucet Company! No, the ESSA® MODEL#: 9113-AR-DST does not have a red/blue button cover for the set screw. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I just had my Delta 9113-DST Essa installed and the flow rate for the hot water is much less than for the cold. Is that the way it was designed?

Asked by: susie
Hello Valued Customer, Thank you for contacting Delta Faucet Company! When water heaters are replaced or when the water is shut off debris can flow through quickly when water is turned back on. With the issue that you are experiencing, the faucet will need to be flushed. Please refer to the information below to flush your faucet. Please also keep a close eye on the flow coming out of each point you flush and if it is low please reply to this e-mail. Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-03-18

The spray seems adequate to remove rust from a car bumper. Is there any way to back it down, its getting us wet? The handle is too sensitive to use to do so regularly. CAN I BUY THE OTHER MODEL HEAD THAT IS 3 SPRAY PATTERNS AND SWAP THEM?

Asked by: DENNIS
Hi DENNIS, Thanks so much for contacting Delta Faucet Company! Unfortunately, model 9113-DST only offers the main RP80524 wand assembly. Installing a different wand may cause docking issues with the spout. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What is the correct part number to order a new sprayer nozzle? Ours is plugged with sand and silt. Do they make a replacement that can be cleaned if it continues to plug up? Thank you Jim

Asked by: Jptz99
Hello Jptz99, Thank you for your question regarding the Delta Faucet Essa® Single Handle Pull-Down Bar / Prep Faucet, model 9913-BL-DST! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Please try soaking it in a 50/50 white vinegar and water solution for about 1 hour, then rinse and wipe with a soft cloth. This will help dissolve mineral buildup. The sprayer assembly is part number RP80524BL. https://media.deltafaucet.com/PartsDiagram/DPD-K-9113-DST%20Rev%20E.pdf Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_6, d_10, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_8, bvpage2n
  • co_hasquestionsanswers, tq_380
  • loc_en_US, sid_9913-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 24ms
  • questions, product
PART LIST

PART LIST

1 2 >
Image-RP37490

Delta®

Delta® Stabilization Plate

List Price: $29.40
Online Price: $23.52
Free Ground Shipping All Orders $49+

RP37490

3.20 5
Image-RP63265

Delta®

Delta® Adapter - Slip Joint

List Price: $58.55
Online Price: $46.84
Free Ground Shipping All Orders $49+

RP63265

Image-Master-RP80525CZ

Essa®

Essa® Handle

List Price: $60.75 - $98.45
Free Ground Shipping All Orders $49+

RP80525CZ

Image-RP63264

Delta®

Delta® Adapter Kit - PEX Compression (10)

List Price: $92.90
Online Price: $74.32
Free Ground Shipping All Orders $49+

RP63264

Image-RP80619

DELTA

DELTA Bonnet Nut

List Price: $23.55
Online Price: $18.84
Free Ground Shipping All Orders $49+

RP80619

Image-Master-RP80524CZ

Essa®

Essa® Sprayer

List Price: $82.40 - $115.30
Free Ground Shipping All Orders $49+

RP80524CZ

Image-RP63263

Delta®

Delta® Adapter Kit - PEX Compression (4)

List Price: $45.35
Online Price: $36.28
Free Ground Shipping All Orders $49+

RP63263

3.67 3
Image-Master-RP70714

Essa®

Essa® Escutcheon w/ Baseplate & Nuts

List Price: $62.65 - $113.15
Free Ground Shipping All Orders $49+

RP70714

Image-RP80528

Delta®

Delta® Gasket

List Price: $20.90
Online Price: $16.72
Free Ground Shipping All Orders $49+

RP80528

Image-Master-RP80520

Essa®

Essa® Spout Assembly - Kitchen

List Price: $115.30 - $167.80
Free Ground Shipping All Orders $49+

RP80520

Image-RP80977

Delta®

Delta® Magnet Replacement Kit

List Price: $69.80
Online Price: $55.84
Free Ground Shipping All Orders $49+

RP80977

3.02 54
Image-RP80523

Delta®

Delta® Hose Weight Assembly

List Price: $53.40
Online Price: $42.72
Free Ground Shipping All Orders $49+

RP80523

Image-RP47888

Allora®

Allora® Soap / Lotion Dispenser - Body Assembly

List Price: $16.60
Online Price: $13.28
Free Ground Shipping All Orders $49+

RP47888

4.06 18
Image-RP60923

Delta®

Delta® Friction Spacers & Clip - Kitchen

List Price: $24.35
Online Price: $19.48
Free Ground Shipping All Orders $49+

RP60923

5.00 2
Image-RP80522

Delta®

Delta® Hose Assembly

List Price: $91.00
Online Price: $72.80
Free Ground Shipping All Orders $49+

RP80522

5.00 1
Image-RP60924

Delta®

Delta® Wrench - DIAMOND™ Seal Technology Faucets

List Price: $25.90
Online Price: $20.72
Free Ground Shipping All Orders $49+

RP60924

5.00 2
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.