Single Handle Pull-Down Bar / Prep Faucet with Touch<sub>2</sub>O® Technology in Matte Black

Model#: 9959T-BL-DST
Single Handle Pull-Down Bar / Prep Faucet with Touch<sub>2</sub>O® Technology in Matte Black
Model#: 9959T-BL-DST
List Price: $1,14200
PRODUCT FEATURES
Touch it on. Touch it off. Whether you have two full hands or 10 messy fingers, Delta® Touch2O® Technology helps keep your faucet clean, even when your hands aren’t. A simple touch anywhere on the spout or handle with your wrist or forearm activates the flow of water at the temperature where your handle is set. The Delta TempSense™ LED light changes color to alert you to the water’s temperature and eliminate any possible surprises or discomfort. Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. Electronic parts are backed by our 5-year electronic parts warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • With Touch2O® Technology a simple touch anywhere on the spout or handle will start and stop the flow of water
  • Helps keep your faucet cleaner, because washing the mess off your hands shouldn't involve making a mess of your faucet
  • LED light signals blue when touch mode is active and flash red when batteries are running low
  • Automatic water flow shut-off after four minutes helps conserve water
  • Integrated TempSense™ LED light shows water temperature, changing from blue to magenta to red as temperature increases
  • Battery operated 6 AA (included) with a battery life of approximately 1 year or 6 C (not included) with a battery life of approximately 3 years
  • Intuitive Touch2O® Technology can sense the difference between a touch and a grab, reducing the chances of false activation
  • Optional A/C adapter EP102157 may be ordered separately
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Water-Efficient
Diamond Seal® Technology
MagnaTite® Docking
VoiceIQ® Compatible
Touch2O® Technology
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 6" or 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
14
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 2 out of 5 by from Beautiful but... I absolutely love the look of this but less than two months in, it started intermittently leaking from the spray nozzle. I've cleaned the nozzle numerous times and tried everything to get it to stop to no avail. VERY disappointing. I did not expect this so early in it's lifetime and it is not returnable.
Date published: 2025-11-29
Rated 5 out of 5 by from Kitchen faucet It’s beautiful and it fits my small kitchen perfectly.
Date published: 2025-11-17
Rated 3 out of 5 by from Magnetic ring detached and broke. Hi, is an excellent product, I would like to know if you sell the magnetic ring, is not on your parts list. Mine detached from the goose neck, and it broke. Is a metal magnetic ring. I Really need this part and instructions of how to attach it.
Date published: 2025-05-15
Rated 5 out of 5 by from Very nice Works as it should … we really like it
Date published: 2025-02-21
Rated 2 out of 5 by from Overengineered. The solenoid ("brain") failed and had to be replaced within the first 3 months after installation. Delta sent a new solenoid which seemed to work fine. However, two years later, it is again malfunctioning. If you turn on the faucet, it randomly turns itself off without being touched. It is very annoying and I'd just as soon have a traditional faucet that works with the handle for on & off. No more of the touch on & off. The six batteries need to be replaced about every four months; expensive and also very annoying. The spray feature works very well.
Date published: 2025-01-12
Rated 5 out of 5 by from One Way to Improve a Beautiful Faucet. The faucet is beautiful. I would have appreciated better, easier-to-follow directions for the on/off feature. I'm still working on the temperature feature.
Date published: 2024-12-19
Rated 2 out of 5 by from Hot and cold labels not consistent I have both this faucet and the Trinsic single-handle bathroom vanity faucet. The cold and hot label are in the opposite direction. For one faucet, when you pull towards the wall, it is hot; in the other, it is cold. It is dangerous for young children, and annoying for us and guests as it is not consistent. Is there any way this can be fixed?
Date published: 2024-11-02
Rated 4 out of 5 by from Great!! But handle needs a cover. Installed this a few years ago: Love it! However the handle needs a cover so it doesn’t activate the on/off switch for water supply when trying regulate the volume/temp. Frustrating but manageable. Hopefully Delta has a handle cover (can’t find one).
Date published: 2024-06-24
  • y_2026, m_11, d_6, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.50
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_176
  • loc_en_US, sid_9959T-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Q&A

I have a drip occurring when it&rsquo;s on touch. It doesn&rsquo;t drip when manually turned off

Asked by: Lyn B
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-05-19

I would like to replace my Solenoid RP64462. How can I get this part?

Asked by: jbasdeo
Hi, jbasdeo! Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to assist you. The Delta Faucet Solenoid Assembly - Kitchen MODEL#: EP74855 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Customer Service
Date published: 2024-03-28

Necesito saber donde puedo saber el modelo del grifo, ya que tengo que comprar los accesorios ya que no me funciona el sistema t&aacute;ctil en su pagina se ven dos tipos muy similares y no tengo claro cual es el que tengo.

Asked by: Gustavo

I have a delta touchless faucet in my kitchen. I think it&rsquo;s model 915T-DST. Recently the red LED light is on solid no matter what the water temperature is and I can not stop the flow using touch while the water is hot. It will stop when the water cools

Asked by: Bill
Hello, Please accept our sincere apology for the inconvenience you are experiencing. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com as we would like to resolve this matter for you at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-05-29

I have a Trinsic 9159T-CZ-DST faucet and since day 1 it has dripped from the back of the spray holes when using the aerator function. Is there some kind of gasket that can be replaced to stop the constant dripping when using the aerator flow?

Asked by: Mike55
Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-08-27

Why is hot water flow switching off when handle is lowered manually past halfway point (moderate temperature) towards hottest setting?

Asked by: Stan S
Hello Stan! Thank you for your question and we are happy to help. The cartridge may need to be replaced. Please contact us directly for further assistance with warranty replacement parts. Best Regards, Carrie
Answered by: Carrie
Date published: 2025-01-21

My solenoid has begun to squeak whenever I touch-turn the water off. Is there any maintenance that can be done to correct this?

Asked by: Jonathan
Hi Jonathan, Thanks so much for contacting Delta Faucet Company about your 9159T-CZ-DST! The noise you are hearing is caused by debris, we would recommend flushing. I have included a link below to the Help Center, which would include the flushing instructions. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How can I claim my warranty after the faucet begins to fail?

Asked by: Raymundo

Hello! I have this in a champagne gold color in my kitchen and it is dripping and it looks like I might need a new cartridge? Can I get the part number for that or how would I order that?

Asked by: Anonymous
Hello, Please accept our apologies for the inconvenience you are experiencing with a leak. We are happy to help! If the faucet drips when the handle is closed, the RP73000 cartridge may need to be replaced for faucets made after 1/01/2018. If it drips when the handle is open and the faucet is touched off, we recommend flushing the faucet, and if the drip continues, the solenoid valve may need to be replaced. See here for more information: https://support.deltafaucet.com/s/article/Touch2O-Drip Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-08-23

The black rocker switch on the nozzle of my faucet, the one that switches between normal/spray, gets stuck in a halfway state between normal and spray. Is there any good way to clean and restore the operation of this switch to what it was like when new?

Asked by: deltadeltadeltacanihelpya

I have this faucet in kitchen for about a year and a half now. Changed batteries earlier this month worked fine for few weeks now there is very little water come out when fully turned on. Like low water pressure, but everything in house works fine.&nbsp;

Asked by: Redtbird
Hello Redtbird, Thank you for your question! I am sorry that you are experiencing low flow from your Delta Faucet Trinsic Single Handle Pull-Down Kitchen Faucet With Touch2O Technology In Champagne Bronze MODEL# 9159T-CZ-DST and would be more than happy to help! Reduced flow is typically caused by debris, which can get caught in a few different areas of the faucet. Please try the following steps, so we can better assist you: 1) First, please unscrew the wand from the hose and turn the faucet on for 4 minutes to flush the lines and see if you get good flow out of the end of the hose. Please check for debris in the wand and re-attach it. Be careful not to let go of the hose with the wand removed, or it may retract into the faucet. 2) Next, turn the handle to the off position, place a bucket under the sink, disconnect the solenoid assembly from the gray PEX tube and check for debris in the screen at the top of the solenoid assembly. If the solenoid assembly is gray, the screen cannot be removed. If it is black, you can use a pair of needle-nose pliers to take the screen out and clean it. 3) Finally, reattach everything and test the flow rate from the wand again. If this does not resolve the issue, please contact us directly. You can reach our customer service team at 1-800-345-3358, Monday through Friday from 7 am to 7 pm and Saturday 8 am to 5 pm CST. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

I'm looking for the replacement part for the magnetic ring that sits at the bottom of the base and keeps the spout attached and flush. It came out and is completely rusted and deteriorated. I didn't see it in the parts list.

Asked by: Nate
Hi Nate, Thank you for your question about the Delta Faucet model 9159T-AR-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! A magnet replacement kit is available as RP80977. https://www.deltafaucet.com/parts/product/RP80977.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-04-16

What cartridge model is be used for this faucet ? Is there way to change it ? where can I get it if I want to get a new one

Asked by: bob27
Hi bob27, Thanks for your question regarding 9159T-AR-DST! Yes, the cartridge can be replaced after removing the handle. For models produced after 1/1/2018, the cartridge is RP73000; however, for models produced before 1/1/2018, the cartridge is RP60114. You can purchase parts online or locally. Please see our Where to Buy page for help finding dealers in your area or online. Please contact us directly if you have any questions or need additional assistance. https://www.deltafaucet.com/where-to-buy Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How do I replace the batteries?

Asked by: Stac
Hello Stac, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! I have included a link to our Delta Faucet TRINSIC&reg; Single Handle Pull-Down Kitchen Faucet With Touch2O&reg; Technology MODEL#: 9159T-BL-DST installation sheet, please see page 8 for battery replacement instructions. https://media.deltafaucet.com/MandI/106559%20Rev%20D.pdf Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Is there a way to replace the magnet that holds the sprayer to the post? The original rusted away...

Asked by: Grant99
Hi Grant99, Thank you for your question about the Delta Faucet model 9159T-BL-DST. Please accept our sincere apology for the inconvenience you are experiencing with the magnet. We are happy to help! A magnet replacement is available as RP80977 https://www.deltafaucet.com/parts/product/RP80977.html Please reach out for assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-05-06

The faucet was installed, and functions manually just fine. However, when touched, the light goes on, but no water comes out. How do i troubleshoot?

Asked by: SRRRRRRRRR

Does this product have an instruction sheet that I can refer to in order to understand the little nuances of the product? We had one installed a few days ago but the plumber took the entire box and packaging material with him so we have nothing.

Asked by: CRHAYES
Hello CRHAYES, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! I have included a link to our Delta Faucet Trinsic&reg; Single Handle Pull-Down Bar / Prep Faucet With Touch2O&reg; Technology In Chrome MODEL#: 9959T-DST installation guide and parts diagram, please see below. https://media.deltafaucet.com/MandI/106559%20Rev%20D.pdf https://media.deltafaucet.com/PartsDiagram/DPD-K-9159T-DST%20Rev%20F.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

What size and thread pitch are the locking screws?

Asked by: greggscott47
Hi greggscott47, Thank you for your question about the Delta Faucet model 9159T-AR-DST. The RP6092 nuts for a three-hole installation measures at .43 outter diameter and thread count is .25-20UNC-1B with a thickness of .185. Please reach out for further assistance or with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-09-10

Hot water will be running just fine, then all of a sudden it goes cold and I can't get hot water for a bit. It does not happen anywhere else in the house, so it's now the water heater. My guess is that it may be the cartridge? Part #?

Asked by: Woodzie
HI Woodzie, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! A replacement cartridge will depend on the date of manufacture. I also recommend checking the included check valves are installed on the supply lines. The check valves prevent cross-flow that can affect the temperature. Please reach out for further assisance! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-02-07

Will the faucet still work if I remove the round black rubber piece at the bottom of the faucet that rests on the counter? It really detracts from the look of the faucet for me.

Asked by: Cindy
Hi Cindy, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Trinsic&reg; Single Handle Pull-Down Kitchen Faucet With Touch2O&reg; Technology In Champagne Bronze MODEL#: 9159T-CZ-DST LED base is used to show the temperature of the water while in use, It also allows for the faucet to be isolated from the top of the sink or counter. Removal of the LED base could cause inconsistent operation of your touch faucet. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

The magent in my faucet broke down and fell off. I do not see a magent in the parts section for this faucet model, could it be replaced with other model's magnet? The model I have is&nbsp;9159T-AR-DST.

Asked by: Kate
Hi Kate, We&rsquo;re very sorry to hear about your experience with your magnet. Our team would like to help resolve this for you as quickly as possible, please reach out to us at 1-800-345-3358. Sincerely, Themar Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-10-05

How do I remove the sprayer assembly for the Delta 9159T-DST so that I can clean out the screen? &nbsp;Does the sprayer assembly just unscrew from the water line?

Asked by: John K
Hello! Thank you for your question! I will be happy to help. Yes, you can simply press the small button on the end of the hose assembly and twist it counterclockwise and remove it from the wand. In order to clean it simply soak the wand assembly in a 50/50 solution of white vinegar and water. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Our faucet just stopped working. Can't turn water on with the touch or with the handle. We know the water works so it is a faucet issue. For a few days it would work sporadically but now not at all. How do I know what needs to be replaced?

Asked by: sarad0827
Hello Anonymous, I am sorry that you faucet is not turning on. I have sent you and email to assist with this. For further assistance call us at 1-844-923-5368 or email us at concierge@deltafaucet.com. Best Regards Violet
Answered by: Delta
Date published: 2024-03-28

Is there a max warm water temp for this faucet?

Asked by: Russ G
Hi SteveP, Thank you for your question regarding our Delta Faucet 9959T-DST. This faucet does not have a rotational limit stop for the handle. We have reached out to you directly by email to further assist you. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

I've had my faucet for just over 1-year and now we are getting barely a trickle of hot water out of it. &nbsp;The hot water pressure and temperature in the rest of the house is working normal.&nbsp;

Asked by: Apps
Hello! Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-12-06

After replacing the cartridge, I've had a lot of difficulty fitting the cap back on over the rubber band, and not exactly sure how the spring should be positioned. The faucet works but the handle is very stiff and hard to move. How do I fix this?

Asked by: zach26
Hi zach26! Thank you for your question and we are happy to help. The Delta 9159T-DST should have the narrow part of the spring facing towards the handle. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2023-08-04

size of hole needed in counter top to install model 9159-AR-DST

Asked by: Brad
Hello, Brad! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! Thi Delta Faucet 9159T-AR-DST Trinsic Single Handle Pull-Down Kitchen Faucet With Touch2O&reg; Technology requires a hole size between 1 1/4&quot; to 1 1/2&quot;. Please see the following technical specification sheet for more information. https://media.deltafaucet.com/SpecSheet/DSP-K-9159T-DST%20Rev%20G.pdf Please contact us directly if further assistance is needed at this time.&nbsp; We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Through daily use, the mounting nut has become cross threaded on the large threaded stem that passes through the hole in the sink damaging the threads on the stem. Is the stem replaceable?

Asked by: Tim R
Hi Tim R, I am sorry you are having issues with your faucet and I would be happy to help. The shank is not a replaceable part. Please watch for an email from me with more information. We'd be happy to help you with this! Best Regards, Yvette
Answered by: Delta7
Date published: 2024-03-28

How do I seek warranty coverage since there is rust coming out of my faucet wand to gooseneck portion of my faucet. There are no other problems and no leaks just rust in the &ldquo;seal&rdquo;

Asked by: Curt
Hi Curt, Thanks so much for contacting Delta Faucet Company about 9159T-AR-DST! We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

We are on an acreage with a well. The water pressure varies from 30 psi to 60 psi. We find that our &quot;Deck FCT Trinsic touch 20&quot; has very low water flow. Is there any type of flow restrictor that can be removed to improve flow? The tap is clean.

Asked by: Jbrent
Hello Jbrent, Thank you for your question! We apologize for the low flow you are experiencing with your Delta faucet and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. We do not recommend removing the flow restrictor from the Delta Faucet model 9159T-AR-DST Single Handle Pull-Down Kitchen Faucet With Touch2O&reg; Technology wand assembly and there is not a removable aerator. Reduced flow is typically caused by debris. If only one side is affected, there is debris in the supply line. To flush the supply line, first shut off the hot and cold water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the middle position, fully open, then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and turn on both supplies. Check flow from the faucet. If this does not help, please let us know. Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28
  • y_2026, m_11, d_6, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.50
  • cp_5, bvpage2n
  • co_hasquestionsanswers, tq_266
  • loc_en_US, sid_9959T-BL-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 67ms
  • questions, product
PART LIST

PART LIST

Image-EP102157 Secondary Image-EP102157

Delta

Delta A/C Power Supply

List Price: $81.00
Online Price: $81.00
Free Ground Shipping All Orders $49+

EP102157

4.35 31
Image-EP100855 Secondary Image-EP100855

Delta

Delta VoiceIQ® Module

List Price: $250.85
Online Price: $160.12
Free Ground Shipping All Orders $49+

EP100855

4.27 100
Image-EP92546

Delta

Delta Solenoid Assembly

List Price: $260.00
Online Price: $172.40
Free Ground Shipping All Orders $49+

EP92546

3.47 51
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.