3- and 6-Setting Diverter Rough

Hello Rod1626, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. Please follow the below link to see the 4 available cartridges that are compatible with the Delta Faucet model R11000 3- And 6-Setting Diverter Rough. The cartridges will be located at the end of the page of products. https://www.deltafaucet.com/search-results?q=diverter+cartridge&lang=en_US Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Sheri, Thank you for your question about the Delta Faucet R11000. This diverter valve is not recommended for use with a tub filler that uses R65700 or R3500-WL valves. These valves are not designed to add a diverter after the water is mixed. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi DBEI, Thanks so much for contacting Delta Faucet Company! Yes, the R11000 and T118 trim kit would allow for both shower heads to be run simultaneously or independently, with the tub spout being run from the bottom port of the main R10000 rough valve. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Good afternoon Maggie! Thank you for your question! I am happy to help you. You would need to plug the right port of the diverter valve by inserting the plug into the valve. Please contact us back for any further questions. Best Regards, Frank

Hi Brian60, thank you for your interest in the R11000! The valve is compatible with any of our 6 Setting Diverter Trim Kits that include the 6 setting cartridge. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist

Hi Daniel, Thank you for your question about the Delta Faucet R11000. This diverter valve does not control the temperature. R10000 and R22000 are valve roughs for mixing hot and cold water. Please reach out with any additional questions! Best Regards, Bryan

Hello Dan NY plumber, Thank you for contacting us, I would be happy to help you. We recommend to use a strap wrench to loosen the bonnet. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello mike, Thank you for your question. We are happy to help! The Delta Faucet T11640 diverter valve used the R11600 valve rough. If you have R11600 installed you will need RP42410 (cartridge assembly), RP37902 (3 function stem extender) OR RP37903 (6 function stem extender), and RP37890 (extension screw) to use a new trim. RP42412 (trim sleeve) may be needed for installations between 3.5 and 4.0 inches deep from the finished wall surface. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Thank you for your question, linda326! Any Delta model number that starts with a T119 would be a 6 setting diverter trim that would fit over the Delta R11000 diverter valve. Best Regards, Benjamin

Hello Bisonnuts, Thank you for your question. We are happy to help! You would want to plumb a diverter tub spout to the bottom port of the R10000 according to the installation instructions. Plumb the top port of the R10000 to the bottom port of the R11000 diverter rough. Plug the right port of the R11000 and plumb the shower head arm and hand shower elbow to the top and left ports. The tub spout would be operated with the pull up or pull down diverter on the tub spout. Using a 3 function diverter trim, you can operate the showerhead and hand shower, with a shared setting. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hello, Medina! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! Yes, the handle for the Delta Faucet R11000 diverter rough-in valve will rotate both clockwise and counterclockwise. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi NickS, Thank you for your question about the Delta Faucet R11000. I am sorry this information was not readily available, and I am happy to help! First, check that it is installed so that the word UP is facing upward. A 6-setting diverter trim can be used for three shower features. If using a 3-setting trim, the two shower features should be piped to the left and top outlets and the right outlet should be plugged. While a tub spout can be installed to this diverter, this is not recommended. The water flow will be reduced and the tub will take much longer to fill. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi dal310, Thank you for your question about the Delta Faucet model R10000 MultiChoice® Universal Tub / Shower Rough. We will be happy to assist you as quickly as possible. 2 showerheads, a hand shower, and 4 body sprays will be four or five shower features, depending on how the body sprays are plumbed. The maximum flow rate will depend on the trim kit or cartridge used with this valve rough. The R11000 diverter rough can use a 6-setting trim for three shower features plus three shared settings. You may need more than one R10000 mixing valve for all the shower features. Especiallially if more than two will be running at once. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Lisa, Thanks so much for contacting Delta Faucet Company! We recommend using the rough-in valve kit R22000 with the Angular Modern Monitor® 14 Series Valve Trim MODEL#: T24867-CZ. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi summy824, Thank you for your question about the Delta Faucet model R11000. Unfortunately, we don't currently carry a diverter trim to use all three outlet ports at once. Our 6-setting trims have three individual settings and three shared settings, for up to two shower features at once. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Dfroe, thank you for contacting Delta Faucet Company! The extension kit for the R11000 is RP75137 and will extend the stem of the diverter cartridge by 1" inch. We appreciate your inquiry. Please reach out directly if you have any questions! Best Regards, Kyra Digital Communications Specialist

Hi Bill, Thanks for your question regarding R11000! The quickest resolution is to return the product to the place of purchase. However, if the store is not able to assist you, please contact us back as we would need further information to process a warranty claim. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Lucky! Thank you for your question! I am happy to help. The Delta R11000 rough does not have settings. The cartridge is included with the trim unit and it is the cartridge that determines how many settings the trim will have. There are Delta Trims available that have either 3 or 6 settings. The 3 setting trims offer 2 individual positions and 1 shared position. The Delta 6 setting trims offer 3 individual settings and 3 shared positions. Please reach out to us directly if you need further assistance. Best Regards, Antoine

Hello Valued Customer, Thank you for contacting Delta Faucet Company! The flow rate through our R11000 valve will vary on the PSI to the home, mixer valve, and other components that are being installed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Michael, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet 3- And 6-Setting Diverter Rough MODEL#: R11000 provides approx. 5.3 GPM @ 60 PSI, when both items are used the flow is shared. If your flow is lower than normal, we would recommend a flush. Please see the step-by-step instructions below. Start by turning the water off to the shower unit. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either an 1/8" or 3/32" allen screw. So you will need to use the appropriate size allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. 2) After removing the handle, remove the trim sleeve. The sleeve is threaded at the valve opening. It unscrews counterclockwise. 3) After removing the sleeve, you will need to pull the cartridge straight out. Once the cartridge is removed, you will have an open valve body. 4) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 5) Re-install the cartridge and re-assemble in reverse of how it was disassembled. Check the full handle rotation. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole Digital Communications Specialist

Hi Bissy, Thank you for your question about the Delta Faucet model R11000 3- And 6-Setting Diverter Rough. We will be happy to assist you as quickly as possible. If using a 3-setting diverter trim, the right outlet should be capped. If a different outlet is capped the diverter handle will not control the shower features correctly. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Jamesm61, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our 3- And 6-Setting Diverter Rough MODEL#: R11000, and I am happy to help you! The 6 setting diverter cartridge would allow for 3 items to be used, shared, and individually. However, if you install this unit and the left port is capped, you will have a dead spot that may cause an issue with an inspection(if needed). The 6 setting diverter cartridge that you may use is part number RP51919, please see the link below. https://www.deltafaucet.com/parts/product/RP51919.html Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Blondie, I am sorry don't have good water flow from the body jet. It sounds like there may be debris in the jet. I would suggest removing the jet and run water through the valve for 30-60 seconds. Then soak the jet in a 50/50 solution of vinegar and water for at least 30 min. Rinse thoroughly and reinstall. Please contact us back if you have further questions or need further assistance. Best Regards, Yvette

Hi BT2022, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you. We do not recommend using our tub spouts with a diverter valve, this could decrease the pressure from the spout. We would recommend you use a Delta Faucet 17 series trim kit for separate volume and temperature controls. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Steve, Thank you for your question! We apologize for the inconvenience you are experiencing and will be happy to help you. Information needed to install the Delta R11000 valve can be found in the Maintenance and Installation manual as well as the Technical Specifications below. Although there is not a specific size recommended for this valve, you will also want to consult the Technical Specifications for the trim that will be used to ensure this fits appropriately in regards to the maximum and minimum allowance. https://media.deltafaucet.com/MandI/70551%20Rev%20F.pdf https://media.deltafaucet.com/SpecSheet/dsp-b-r11000_F.pdf Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Richard, Thank you for your question! I am happy to help you! Our Delta R11000 would accept the 3 separate items or shared, and the trim you get would determine how many items you can use. For your items I would recommend any of our T119 trim kits, It would come with a shared cartridge. The non-shared cartridge is RP71718, please see the link below. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP71718 Please contact us back with any further questions. Best Regards, Nicole

Hi AO2ICE, Thank you for your question! Yes, for a shower faucet with the shower head and hand shower, you would have an R11000 diverter valve and an R10000 mixing valve. When the design is finalized, any Delta MultiChoice valve trim can be used, and any Delta diverter trim. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Lck2010, Thank you for your question about the Delta Faucet model R11000 3- And 6-Setting Diverter Rough. I apologize for any difficulty finding this information. We are happy to help! Yes, the R11000 has one input port and three output ports. A 6-setting diverter trim kit used with this valve will have three individual settings and three shared settings. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan