3-Setting Custom Shower Bundle - 14 Series in Chrome

Hello Jonathan! Thank you for your question and we are happy to help. The Delta FVS6-SA2101-SS is made of several materials which may include but are not limited to: Bronze, Brass, Zinc, Stainless Steel, Copper, PEX-C, Silicon, Synthetic rubber, Vinyl, Nylon, and, Plastics. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi Valued Customer, Thank you for your question regarding our Delta Faucet FVS6-SA2101. Unfortunately, we do not offer a 1700 series trim kit similar to this trim. The 1700 series would need to be purchased separately. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Ryan! Thank you for your question and we are happy to help. The Delta FVS6-SA2101-BL bundle is not available without the rough in. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello, Thank you for your question. I have included the flushing instructions below. To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Please contact us back if you have any questions or need further assistance. We appreciate your business and look forward to continuing to serve you. Best Regards, Themar Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist