Monitor® 14 Series Tub and Shower in Spotshield Brushed Nickel

Hi Rob 67, Thank you for your question about the Delta Faucet model 144864-OB. The part numbers RP39407OB, RP6023OB, and RP6025OB in oil rubbed bronze are available to order for the shower arm, flange, and trim sleeve. The RP77089OB escutcheon plate and RP102030OB handle kit are not yet available for orders but are expected to being shipping orders on 6/1/2023. See the parts diagram for more information: https://media.deltafaucet.com/PartsDiagram/DPD-B-142864%20Rev%20A.pdf Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Kiko, Thank you for your question about the Delta Faucet shower 142864-SP. To increase the maximum temperature, adjust the Rotational Limit Stop counterclockwise. See the installation instructions or a video here: https://www.youtube.com/watch?v=L3ty-H1V01I Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Heather, Thanks so much for contacting Delta Faucet Company! The GEIST® Monitor® 14 Series Tub And Shower MODEL#: 144864-OB parts diagram can be found at the link below. https://media.deltafaucet.com/PartsDiagram/DPD-B-142864%20Rev%20A.pdf Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello! Thank you for contacting Delta Faucet Company! To adjust your 1400 series temperature for hotter water, please follow the instructions below. You shouldn't need to shut your water off but keep in mind it is still possible for the water to turn on if the stem is rotated. Please gather 1/8" allen wrench for a lever handle and a philips screwdriver for a knob handle. 1. Remove your handle with your 1/8" allen wrench. The set screw should be under the lever of the handle. If you have a knob, please remove the cap on the tip of the handle. You will need a philips head screwdriver to remove the screw. 2. Pull the sleeve assembly off of the valve. This is the cylindrical part behind your handle that hides the valve body. 3. You will see a brass stem and a plastic white piece on the tip of the cartridge. The white piece has notches on it to grip it easier. 4. Please pull the white piece towards you and rotate counter-clockwise for hotter water. *Please note there is a limit of how far this will rotate, if you rotate to the hottest setting it will be the same temperature as your water heater. This is not recommended as it can cause scalding. Please also note that each notch you rotate to can range anywhere between 4 and 16 degrees Fahrenheit.* Now you are able to install your sleeve and your handle onto your valve. Turn your water on and see if this is your desired temperature. If it is, tighten the set screw or the screw and the temperature adjustment on the cartridge is done! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Chris, Thank you for your question about the Delta Faucet model 142864-BL. A bead of silicone can be used to seal the escutcheon to the wall or if the wall is uneven. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Marilyn! Thank you for your question and we are happy to help. This does not affect the lever. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie