Two Handle Widespread Bathroom Faucet in Venetian Bronze

Hi Tory, Thank you for your question! The RP72130 Decorative InnoFlex Covers can be purchased separately to cover the PEX supply lines. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP72130 Best regards, Jon

Hello KP3273, Thank you for your question. The Stainless Steel finish on the Delta Trinsic Lavatory 3559-SSMPU-DST faucet does not have the SpotShield finish at this time. Please see the link below of our finish unit. https://www.deltafaucet.com/service-parts/frequently-asked-questions/finish/primary-content-area/frequently-asked-questions/faq-item-2#answer-27987ea1-77e8-4eee-a9e2-f1fa8c0366fa Best regards, Tanya

Thank you for your question, Robert! The aerator for this model has a thread size of M16.5x1-6g. Although we do not manufacture an adapter for this size, you may find one locally from a plumbing supplier. Best regards, Edward

Hi B,Thank you for your question! The 3559 widespread lavatory faucet does not swivel. We do not currently have any wide spread lavatory faucets that swivel. Best regards, Brandis

Hi, Jay M! Thank you for your question. The Metal Pop Up drain assembly that comes with the 3559-BLMPU-DST will be in the same Matte Black (BL) finish. Best Regards, Rosanna

Hi, UrlBa! Thank you for your question. The stopper on the drain assembly for the Delta 3559-BLMPU-DST can be removed by first unscrewing the pivot seal and gasket from the drain pipe. Unscrew the nut from the strap. Remove the horizontal rod. The stopper can now be removed from the top of the sink. Here is a link to show these parts on the parts diagram: https://media.deltafaucet.com/PartsDiagram/DPD-L-3559-MPU-DST.pdf Best Regards, Rosanna

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi, Debbie26! Thank you for your question. The Delta RP71260 Aerator Wrench is the correct wrench for the Delta 3559-MPU-DST Faucet. Best Regards, Rosanna

Hello Eric, Thank you for your question. The Delta Trinsic Lavatory 3559-MPU-DST faucet is designed with a flow rate of 1.2 GPM at 60 PSI. If you are getting a lesser flow than that, we would advised removing and cleaning the aerator in the end of the spout. You may also want to flush out the valve body, so that these parts do last as long as possible. Please first turn off the water supply to the faucet. Gather an adjustable wrench, some towels and a bucket. Disconnect the hot side Innoflex line. Move the handle to the full on position, middle temp. Point the hot side Innoflex line into a bucket. Turn on the cold supply valve full. Let a gallon or two flow into the bucket. Shut off cold supply. Check bucket for debris. If no debris, empty bucket and run one more time. Move handle to off position. Reattach hot side line. Turn on both water supply valves. Best regards, Tanya

Hi, Anthony! Thank you for your question. We recommend a 2 1/2" clearance to backsplash so that this fits not only at the top of the sink but also to be able to be installed and have room under the sink. Best Regards, Rosanna

Thank you for your question. The handles come in a set and are sold as part number H259CZ. You can order these directly from the warranty center by calling 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best regards, Edward

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Dennis, Thank you for your question! There is no adjustment for the handles on the 3559-MPU-DST. Best regards, Brandis

Hi, Kevin! Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Best Regards, Rosanna

Hi Jim, Thank you for your question regarding our Delta Faucet 3559-RBMPU-DST. The faucet uses an RP60400 cartridge. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Valued Customer. Thank you for contacting Delta Faucet Company! We apologize for the inconvenience you are experiencing and we are happy to help! We manufacture push-pop-up drains with and without overflow holes. The push-pop-up drain with overflow holes is 33W576RB. https://www.deltafaucet.com/parts/product/33W576RB.html https://www.deltafaucet.com/where-to-buy We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Greg, Thank you for reaching out to Delta Faucet Company! The outlet connector for our 3559-RBMPU-DST is RP60457. It can be found online or locally. Please refer to the parts diagram for more part information, and the link to find our dealers local to you. https://media.deltafaucet.com/PartsDiagram/DPD-L-3559-MPU-DST%20Rev%20D.pdf https://www.deltafaucet.com/where-to-buy We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Greg, Thank you for reaching out to Delta Faucet Company! We apologize that this information was not readily available to you and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi LS88, Thank you for your question about the Delta Faucet model 3559-RBMPU-DST. The handle set screws are located under the red and blue indicators or covers. Carefully work out the cover to get to the set screw. I recommend a nonmetal tool like a toothpick or a business card. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Tams, Thank you for your question about the Delta Faucet model 3559-SSMPU-DST. Three RP73168 gaskets are included for under the handles and under the spout. The gasket could be visible. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello dumpem, Thank you for contacting us. I apologize for the issue you are experiencing with your Delta faucet lift rod and I am happy to help you. The curve of the Delta Faucet model 3559-MPU-DST Two Handle Widespread Bathroom Faucet lift rod should be facing up towards the faucet. For assistance with the installation of the lift rod and strap, please refer to pages 5 and 10 of the below installation guide. https://media.deltafaucet.com/MandI/109016%20Rev%20A.pdf Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi CML Charlotte, Thanks so much for contacting Delta Faucet Company about the 3559-MPU-DST! If the handles are leaking when the unit is on the stems would need replaced, we would also advise flushing. I have included a link below to the parts diagram for the sink faucet. I have also included a link to the deck mount tub filler rough, as well. https://media.deltafaucet.com/PartsDiagram/DPD-L-3559-MPU-DST%20Rev%20D.pdf https://media.deltafaucet.com/PartsDiagram/DPD-B-R2707_A.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello, Michelle! Thank you for contacting us regarding our Delta Faucet DELTA® Trinsic® Two Handle Widespread Bathroom Faucet In Chrome MODEL#: 3559-MPU-DST. I am sorry for the issue with the handles, I know this can be frustrating, but I am happy to help you! Here is the maintenance and installation sheet the information for the handles are on page 2 and 3. https://media.deltafaucet.com/MandI/109016%20Rev%20A.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Needhelp, Thank you for your question about the Delta Faucet model 3559-BLMPU-DST. A set of replacement handles is available as part number H259BL. https://www.deltafaucet.com/parts/product/H259BL.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello John, Thank you for your question! We will be happy to help you today! Unfortunately, we do not have a widespread lavatory faucet that swivels in Champaign Bronze. Please contact us back for any further questions. Best Regards, Renna

Hello CapeTown, Thank you for your question, I would be happy to assist you. The flow rate of this faucet is 1.2 gallons per minute. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards,Joshua

Hi Megan! Thank you for your question! We always recommend cleaning Delta faucets with a 50/50 solution of white vinegar and water to ensure the product will stay clean yet leave the finish undamaged. Best Regards, Tim

Hello! Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Joe C! Thank you for your question and we are happy to help! The correct cartridges for the Delta 3559-SSMPU-DST are the RP60400. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi led123, Thank you for your question about the Delta Faucet model 3559-MPU-DST. I am sorry this information was not readily available, and I am happy to help! We recommend using plumbers tape for the connection between the drain body and the tailpiece to prevent leaks. See an installation video here: https://support.deltafaucet.com/s/article/How-to-Install-a-Delta-Pop-Up-Sink-Drain-1628025862069 Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist