Two Handle Widespread Bathroom Faucet in Stainless

Model#: 3564-SSMPU-DST
Two Handle Widespread Bathroom Faucet in Stainless
Model#: 3564-SSMPU-DST
List Price: $54200
PRODUCT FEATURES
The Delta® Ashlyn® collection blends timeless design with dependable, long-lasting performance. Powered by DIAMOND Seal® Technology, the diamond-embedded valve helps reduce leak points and keeps your faucet performing like new for life, lasting up to twice as long as the industry standard. InnoFlex® PEX supply lines add durability by keeping water safely contained within the faucet. WaterSense® labeled for efficient performance that uses at least 20% less water, Ashlyn delivers everyday reliability you can feel good about—backed by Delta’s Lifetime Limited Warranty.
  • LASTS 2X LONGER: Diamond Seal® Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.
  • LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines deliver long-lasting durability and are tested to withstand 20% more extreme pressure for 1,000 hours without leaking — far beyond plumbing standards.*
  • WATER EFFICIENT: Delta® WaterSense® labeled faucets use at least 20% less water than the industry standard—helping you save water without compromising performance.
  • READY FOR INSTALLATION: Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • ADA-COMPLIANT DESIGN: ADA-compliant lever handles make it easy to adjust volume and temperature
  • BUILT TO LAST: Quality is our top priority, so all our products must meet stringent quality and performance standards
  • LIFETIME LIMITED WARRANTY: You can install with confidence, knowing all Delta kitchen faucets are backed by our warranty
  • FLEXIBLE INSTALLATION: Fits 3-hole, 4-16 inch installations
Special Information
Warning Image
California Prop 65 WARNING
Eco-Friendly
WaterSense® Labeled
Technology and Special Features
EZ Anchor®
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Water-Efficient
Diamond Seal® Technology
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
3-hole 4-16" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
Overall Height (in.) :
5-1/4
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 3 out of 5 by from Great couldn’t use in new bathroom remodel though due to size The item is not able to be installed into my bathroom. It’s beautiful. So I gave it to my mom who it actually fit in her bathroom. There was too much to hook up in my small vanity in my bathroom underneath didn’t have enough room for all of the pieces She said that it’s beautiful and that it works very well!!! Can’t wait to start my kitchen remodel and bedroom Hopefully this brand has other things I can look for because they have very good products I gave three stars because of the fact that I could not use it myself because it said that it would be compatible but when we got it, it was a lot of pieces
Date published: 2026-06-11
Rated 4 out of 5 by from Love the style and quality but wish I had gotten spotless and the push down drain. I also really hope to purchase the Roman tub faucet to match but pricing is quite high
Date published: 2026-04-10
Rated 4 out of 5 by from I wish I had gotten the spotless faucet and disappointed it wasn't the drain that is just pushed...turns out it was the Ashlyn I wanted but a different model...disappointing for the cost but my fault for rushing. Design overall aesthetic is same
Date published: 2026-04-02
Rated 5 out of 5 by from My new Chrome faucet is guaranteed for life! Very high-quality Delta product with smooth chrome finish. I have dealt with light cheap plastic-like faucets in the past, and I could tell this Delta two handle faucet. is excellent and reliable in comparison. The fixtures are well made of metal and have a solid heft to them. I’m sure they will last an extremely long time. The label even says guaranteed for life! Satisfied with this product.
Date published: 2026-03-29
Rated 5 out of 5 by from Delta faucet Works fine and has a great nickel finish, very please with purchase!
Date published: 2026-03-14
Rated 3 out of 5 by from Nice quality, difficult dimensions I’m honestly only rating this 3 stars right now because it’s been a whole struggle and I have yet to fully install or get to use the faucet yet. SO MANY PROBLEMS. The problems are not all with the faucet. We went to replace our faucet and realized our sink was rusty. We then went to buy a new sink and decide to full send and get a new vanity. That was an ordeal to install with lots of issues that came up. So now hip deep in a renovation just to review this faucet we finally are ready to install it. It doesn’t fit the new vanity sink holes…. So my husband is now trying to figure out how to accommodate. I will return to give an update once it’s finally installed. The product itself is such nice quality. It’s really a beautiful looking piece. I’m excited to have this as our main bathroom faucet.
Date published: 2026-03-06
Rated 4 out of 5 by from Sleek modern design It was really easy to install, good thorough instructions. The quality is very good, no leaks and the finish looks durable. It’s a sleek modern vibe, the handles are a good size. The only thing I didn’t love was how shiny the finish is. But it seems durable and great quality!
Date published: 2026-03-05
Rated 5 out of 5 by from Sleek design and easy to install This sleek design makes for a nice touch of class to our bathroom. The assembly was easy enough for a woman to install it without any problems. The water flows quickly and quietly through the faucet without any leaking components. I would highly recommend this product and design when considering what type of faucet you’re wanting to use in your bathroom.
Date published: 2026-03-04
  • y_2026, m_8, d_6, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_167
  • loc_en_US, sid_3564-SSMPU-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 11ms
  • reviews, product
Q&A

does my warranty cover service ?

Asked by: will
Hello! Thank you for contacting Delta Faucet Company! All parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. For more warranty informatoin, please referto the link below! https://www.deltafaucet.com/warranty We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-09-26

Due to the damage to the chrome coating of the handle, can I buy the handle separately?

Asked by: He shengxiang
Hi He shengxiang, Yes, the handles are part number H264. Please view the parts breakdown in the link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-3564-MPU-DST.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-29

I pulled up the mechanism on the faucet to close the drain and now I can’t get it to stay down.  Is there a trick?  

Asked by: Laurie
Hello Laurie, Thank you for your question. We are happy to help with your question about the Delta Faucet 3564-BLMPU-DST! Check that the lift rod and horizontal rod are free to move below the sink. The connection to the horizontal rod can be adjusted for the sink height. If the issue remains, disconnect the lift rod to see if the issue is with the movement of the horizontal rod in the drain or the movement of the lift rod in the faucet. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I’m looking aerator 

Asked by: Sohail
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-21

I cannot push or pull the sink stopper Handel it is stuck on all my faucets why is this? 

Asked by: Smoores
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2026-02-11

The handles are loose on this faucet. Plumber said we needed a special tool to take a part and reinstall/fix.  Said tool comes from delta.  Do you know what this might be? 

Asked by: Sara Brunetti
Hi Sara, Thank you for your question about the Delta Faucet model 3564-MPU-DST. I'm sorry to hear the handle is loose, we are happy to help! The EZ anchor nuts are tightened above the sink with the included anchor nut wrench RP92395. https://www.deltafaucet.com/parts/product/RP93495.html See the installation manual for more information: https://media.deltafaucet.com/MandI/77310%20Rev%20I.pdf Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2022-12-06

What is the thread size on this faucet?

Asked by: Kak86
Hi Kak86, Thanks so much for contacting Delta Faucet Company! The ASHLYN® Two Handle Widespread Bathroom Faucet MODEL#: 3564-MPU-DST aerator is 13/16"-27 male. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-21

Are the handles included with the Ashlyn faucet for the $413.00 price?

Asked by: Jean
Hello Jean, Thank you for your question about the Delta Faucet model 3564-BLMPU-DST ASHLYN® Two Handle Widespread Lavatory Faucet - Metal Pop-Up. I apologize for any difficulty finding this information. We are happy to help! Yes, this faucet model includes the H264 handle set. See the part diagram for more information on included parts: https://media.deltafaucet.com/PartsDiagram/DPD-L-3564-MPU-DST_A.pdf Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

How do I access the aerator of this faucet in order to clean it and allow full water flow?

Asked by: LarDog8
Hi LarDog8! Thank you for your question! I will be happy to help. You need the RP54977 aerator wrench to remove and clean it. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP54977 Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

My bath faucet Ashlyn 3564-mph-dst. I need part RP77416 or RP 77417 for replacement. It was installed in a new home 3 years ago. Your website says it is discontinued! Where can I find this part?

Asked by: Bop38

How do I tighten the spout on the ASHLYN® Two Handle Widespread Bathroom Faucet with EZ Anchor?

Asked by: Gayla
Thank you for your question, Gayla! I have included a link to the Maintenance and Installation sheet for model 3564-MPU-DST. Please refer to page 6 for instructions on how to tighten the spout. Feel free to contact us directly, if you need further assistance. https://media.deltafaucet.com/MandI/77310%20Rev%20H.pdf Best Regards, Benjamin
Answered by: Benjamin
Date published: 2024-03-28

Very stiff drain lifting mechanism on my matte black Ashlyn 3564. Can I lubricate? Ideas?

Asked by: Steve
Hello Valued Customer, Thank you for contacting Delta Faucet Company! The horizontal rod on the pop-up below the counter may be too tight to move. Loosen the nut just a little so there is no leaking. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-03-19

How do I remove the aerators to clean?

Asked by: jkenn
Hi jkenn, Thank you for your question about the Delta Faucet model 2564-SSMPU-DST. The aerator can be unscrewed from the end of the spout with the included plastic aerator wrench. A replacement aerator and wrench are available as RP54977. https://www.deltafaucet.com/parts/product/RP54977.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-01-08

How can I remove the aeration part from the faucet?

Asked by: JuJu74
Hello Customer! Thank you for your question and we are happy to help. The Delta 3564-MPU-DST aerator can be removed with the tool RP54977-1.2. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Carrie
Date published: 2025-04-07

How to change cartridge on 3564 faucet

Asked by: Roy p
Hi Roy p, Thanks so much for contacting Delta Faucet Company! The ASHLYN® MODEL#: 3564-MPU-DST handles have a button covering the set screw which would need to be loosened to remove the handle. Please see the link below, page 5 for installation instructions. https://media.deltafaucet.com/MandI/77310%20Rev%20I.pdf From there you can remove the bonnet and anchor nuts, then pull straight up on the valve assembly. Install valve assembly correctly for proper handle rotation. Replacement DST valves are shipped in the HOT orientation. For COLD valve operation, lift the stop, rotate it 90 degrees clockwise and push it back down into position. Install valve with arrow toward spout. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I need to order a plate that the handle sits on mine is bent. I don't see it in the parts list what do I do.

Asked by: Tina
Hello Tina, Thank you for contacting Delta Faucet Company. I am sorry to hear that your Ashlyn® Two Handle Widespread Bathroom Faucet With EZ Anchor® In Chrome MODEL#: 3564-MPU-DST handle base is bent, which can be very frustrating. I am so glad that you contacted us, so we can get this taken care of for you! I have included the parts diagram link showing the handle base replacement part number is RP77420, please see the link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-3564-MPU-DST_A.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

What is the part number for the aerator?

Asked by: Frank
Hi Frank, Thank you for your question about the Delta Faucet model 2564-SSMPU-DST. Replacement aerators are available as RP54977 or RP54977-1.2. https://www.deltafaucet.com/parts/product/RP54977.html https://www.deltafaucet.com/parts/product/RP54977-1.2.html Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Can this be used on pedestal sink?

Asked by: Gracie
Hi Valued Customer, Thank you for your question! Yes, the faucet can be installed on a pedestal sink. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2026-02-09

Where is the Ashlyn bathroom sink faucet made?

Asked by: Mike
Hi Mike, Thank you for your question about the Delta Faucet model 3564-RBMPU-DST Ashlyn® Two Handle Widespread Bathroom Faucet With EZ Anchor® In Venetian Bronze. We will be happy to assist you as quickly as possible. As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

which aerator wrench do I need for this faucet. none came with the house

Asked by: Linda
Hello Valued Customer, Thank you for contacting Delta Faucet Company! The 3564-MPU-DST uses a 3/32" inch allen wrench to remove and tighten the handles. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-02-16

We purchased the Ashlyn 3564 faucet to use on our pedestal sink several months ago. As the remodel winds down, our plumber has informed us that the sink has 1 1/8 inch holes and the faucet requires 1 1/4 inch holes. Any suggestions? love this faucet.

Asked by: AmyS
Hello AmyS, Thank you for contacting us, I would be happy to help you. For model 3564-MPU-DST, we require a minimum of 1 1/4". Unfortunately there is nothing else that can be done, the EZ anchor is what holds the faucet to the sink and it needs the hole to be a specific size. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

Can I buy just the set screw for the Ashlyn widespread handle?

Asked by: Kevin076
Hi Kevin076, Thanks so much for contacting Delta Faucet Company! The set screw is not a separate purchase but it is part of the handle assembly, H264. Please reach out with further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

how do you access the aerator for cleaning?

Asked by: DonZ
Hello DonZ, Thank you for your question. We are happy to help! The 2564-SSMPU-DST faucet includes an aerator wrench to unscrew the aerator in the spout. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

How do you access the set screw to tighten the handles without damaging the red and blue marker covers

Asked by: hts9
Hello! You will need to remove the red/blue set screw covers with a small flathead screwdriver or similar tool to access the set screw. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if an issue occurs with the red/blue covers. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-30
  • y_2026, m_8, d_6, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_4, bvpage2n
  • co_hasquestionsanswers, tq_92
  • loc_en_US, sid_3564-SSMPU-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 71ms
  • questions, product
PART LIST

PART LIST

Image-RP93495

DELTA

DELTA Anchor Nut Wrench

List Price: $17.90
Online Price: $14.32
Free Ground Shipping All Orders $49+

RP93495

Image-Master-RP52658

Dryden®

Dryden® Set Screw & Button Set

List Price: $20.50 - $21.60
Free Ground Shipping All Orders $49+

RP52658

Image-RP60457

Leland®

Leland® W-Connector

List Price: $43.30
Online Price: $34.64
Free Ground Shipping All Orders $49+

RP60457

Image-RP41896

Delta®

Delta® Glide Ring - Small

List Price: $17.60
Online Price: $14.08
Free Ground Shipping All Orders $49+

RP41896

Image-Master-RP49146

Victorian®

Victorian® Lift Rod - Bathroom

List Price: $21.35 - $43.40
Free Ground Shipping All Orders $49+

RP49146

Image-Master-H264

Ashlyn®

Ashlyn® Metal Lever Handle Set

List Price: $86.30 - $139.50
Free Ground Shipping All Orders $49+

H264

Image-RP60456

Leland®

Leland® Nut & Washer - Spout

List Price: $43.30
Online Price: $34.64
Free Ground Shipping All Orders $49+

RP60456

Image-RP12517

Delta®

Delta® Horizontal Rod

List Price: $22.50
Online Price: $18.00
Free Ground Shipping All Orders $49+

RP12517

2.86 7
Image-RP54977-1.2

Delta®

Delta® Aerator - Water-Efficient w/ Wrench - 1.2 GPM

List Price: $22.35
Online Price: $17.88
Free Ground Shipping All Orders $49+

RP54977-1.2

5.00 1
Image-RP5648SS

Delta®

Delta® Drain Stopper - Bathroom

List Price: $53.60
Online Price: $42.88
Free Ground Shipping All Orders $49+

RP5648SS

4.25 8
Image-Master-RP104163PC

Ashlyn®

Ashlyn® Spout Escutcheon & Gasket

List Price: $30.85 - $48.35

RP104163PC

Image-RP12516

Delta®

Delta® Strap w/ Screw

List Price: $18.45
Online Price: $14.76
Free Ground Shipping All Orders $49+

RP12516

Image-RP83791

Ashlyn®

Ashlyn® Set Screw Covers

List Price: $11.65
Online Price: $9.32
Free Ground Shipping All Orders $49+

RP83791

5.00 1
Image-RP6142

Delta®

Delta® Gasket

List Price: $12.35
Online Price: $9.88
Free Ground Shipping All Orders $49+

RP6142

2.00 1
Image-RP54977

Lahara®

Lahara® Aerator - Water-Efficient w/ Wrench - 1.5 GPM

List Price: $21.25
Online Price: $17.00
Free Ground Shipping All Orders $49+

RP54977

3.67 9
Image-RP6140

Delta®

Delta® Nut & Washer - Drain Assembly

List Price: $25.00
Online Price: $20.00
Free Ground Shipping All Orders $49+

RP6140

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.