Single Handle Bathroom Faucet in Stainless

Hi jemcfadden, Thanks so much for contacting Delta Faucet Company about your 533LF-SSMPU! Our Delta faucets are made of several materials and may depend on which model you have. We can't provide that level of detail every time, and specific amounts are considered proprietary (trade secret). I have included our cleaning and care information below. Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to a build-up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse the surface thoroughly with water afterward. I have also included a link to our “How to clean your faucet” on our website, please see the link below. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The handle snaps down. Please refer to the maintenance and installation sheet. https://media.deltafaucet.com/MandI/115729%20Rev%20A.pdf Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hi valued customer, Thank you for your question about the Delta Faucet model 533LF-SSMPU. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! For models with a push pop-up, the stopper should turn 90 to unlock it and then pull straight up. The stopper has tabs that lock into the overflow holes. https://support.deltafaucet.com/s/article/Removing-a-Push-Pop-Up-Drain-sink-stopper If the faucet has a lift rod to move the stopper, the horizontal rod may need to be removed to service the stopper. https://support.deltafaucet.com/s/article/Can-I-install-a-PPU-or-MPU-so-the-stopper-is-removable Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

I just meant that I would leave the pop-up out and use a strainer that you can take out to clean (with fine holes). I assumed you can either put the pop-up in or leave it out and use a removable strainer. Thanks.

Hi Barb, Thank you for your question about the Delta Faucet model 533LF-SSMPU. Our Brilliance stainless finish is similar to brushed nickel. It is a neutral, low-gloss finish. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi dazim, Thank you for your question about the Delta Faucet model 533LF-SSMPU. The handle should be up for cold water and pulled down for hotter water. The supplies can be reversed if preferred. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Steve, Thanks so much for contacting Delta Faucet Company! The KAYRA™ Single Handle Bathroom Faucet MODEL#: 533LF-SSMPU uses the RP92349 valve cartridge. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Dear tsop, Thank you for your question! I apologize for any trouble finding information and I am more than happy to help you! The valve in Delta model 533LF-SSMPU is the RP92349. Feel free to contact us directly, if you need further assistance. Best regards, Kyra