Foundations®
Monitor® 13 Series Tub & Shower Trim
Model#: BT13410
- Valve is not included, must purchase separately
- Single-setting shower head
- Backed by Delta Faucet’s Lifetime Limited Warranty
-
WaterSense® Labeled
List Price*:
$102.55
Rough Valve
MultiChoice® Universal Tub / Shower Rough - Universal Inlets / Outlets
(R10000-UNBX)
$60.00
MultiChoice® Universal Tub / Shower Rough - IPS Inlets / Outlets
(R10000-IP)
$60.00
MultiChoice® Universal Tub / Shower Rough - IPS Inlets / Outlets
(R10000-IPWS)
$84.10
MultiChoice® Universal Tub / Shower Rough - PEX Crimp
(R10000-PX)
$60.00
MultiChoice® Universal Tub / Shower Rough - PEX Crimp
(R10000-PXWS)
$84.10
MultiChoice® Universal Tub / Shower Rough - Universal Inlets / Outlets
(R10000-UN)
$60.00
MultiChoice® Universal Tub / Shower Rough - Universal Inlets / Outlets
(R10000-UNBX)
$60.00
MultiChoice® Universal Tub / Shower Rough - Universal Inlets / Outlets
(R10000-UNWS)
$84.10
Base Parts
Monitor® 13 Series Tub & Shower Trim
BT13410
List Price*: $102.55
Configurable Parts
No Rough Valve Selected
- WaterSense certification promotes water conservation
- Monitor pressure balance valve keeps water temperature within a safe +/-3degrees F (+/-1.6degrees C), helping to protect you from sudden changes in hot or cold water pressure
- Trim kit only, must order MultiChoice Universal rough-in separately to complete the unit
- Single function operation
- Single lever handle for ease of temperature control
- Meets standards set by Americans with Disabilities Act (ADA)
- Spray settings include: Full Body
Monitor®
Installation Information
- Flow Rate: 1.75 gpm @ 80 psi, 6.6 L/min @ 552 kPa
- Spout Length: 5-13/32"
- Valve Type: Single-function pressure balance cartridge
- Spray Settings: Full Body Spray
Rated 5 out of
5
by
Interiordesignbytalena from
Good for the price
I purchased this for a client of mine whose house I redesigned and renovated. This was purchased for a guest bathroom which had a transitional design. The price is good and Delta is always a great product. My client is happy with it as well. [This review was collected as part of a promotion.]
Date published: 2019-05-06
Rated 5 out of
5
by
Jean CFI from
Delta Tub and Shower Faucet
The tub and shower faucet were simple and elegant in the bathroom renovation.
Date published: 2019-03-23
Rated 5 out of
5
by
Lilvon from
Excellent product
Faucet works exactly as described. It goes with our clean modern decor. It feels sturdy and not cheap like some other products. Overall I would order again and will for our next remodel.
Date published: 2019-03-01
Rated 5 out of
5
by
mjs49 from
Nice product
First Delta set i ever installed. This set looks nice and seems to be made with quality. Easy install
Date published: 2018-05-09
Rated 5 out of
5
by
Sandman66 from
What a plumber uses
Well as a plumber for the last 20 years, I can say that this is the only tub and shower valve I well install personally and the only one Ive recommend. It's easy for your plumber to install and easy to repair in the future, witch saves labor cost to the costumer. Delta has figured itt out, quality and style.
Date published: 2018-02-18
Rated 2 out of
5
by
jian from
no volume control
I bought this without volume control. I can't use little water for shower and the water is expensive. Not good idea to buy this kind. I suggest to switch to 17 series with volume control.
Date published: 2017-04-29
Rated 5 out of
5
by
BPM from
just what the Dr ordered.......
super finish. affordable. super fast. thx
Date published: 2016-12-01
Rated 5 out of
5
by
jaypeeaz from
Best faucet to use!
Legendary Delta quality and the price cannot be beat.
Date published: 2015-05-02
Can I use this trim with the #58470 in2ition h2okinetic shower/handshower?
Hi SCmom,
Thank you for your question. You sure can! Any Delta shower head will work with this trim.
Best regards,
Jon
Date published: 2016-07-13
I have the delta tub and shower B114900. I am trying to install the tub spout onto a 1/2" copper pipe that is 4" from my wall. It will not push flush to the wall. There is a 3/4" gap. Do I need to cut the copper pipe to 3 1/4"?
Dbrinton,
Thank you for your question. For a slip-on installation, the pipe should extend 1-1/2" to 2-3/4” from the finished wall. Threaded installations require a 3-7/8" to 4” pipe.
Best regards, Jon
Date published: 2018-02-15
How can this be upgraded?
We are having a new home built and the builder (Brookfield) is using this model (Foundations Monitor 13) in the bathrooms. I want to upgrade everything. Shower head, spigot, and handle, to something nicer. What Delta shower packages can I upgrade to without having to rip out the wall?
Thanks... Mike
Hi, Mike D!
Thank you for your question. Any new trim kit that starts with T13, T14, T17, and T17T will work with your existing valve body inside of your wall. Here is a link to the shower units:
https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets
Best Regards,
Rosanna
Date published: 2017-09-07
Are there any parts of this that are non-metallic? If so, please identify.
Hi Candy,
Thank you for your question! The shower head, tub spout, and cartridge are non-metallic. All other parts will be metal.
Best regards,
Jon
Date published: 2016-02-17
I have a Scald Guard shower/bath valve that was installed in 1993. I do not know what the model was. I am looking to update the trim only.
Is it safe to assume the 1300/1400 model line trim would fit?
Thank you for your question. If your faucet turns on by turning the handle to the right or left, you have a 1300/1400 series faucet. You can use any 1300/1400 trim but you will need to keep your old cartridge. The cartridge that comes with the new trim will not work with your older valve.
If you turn on your faucet by pushing up and then turning to the right or left, you have a 600 series faucet. The 1300/1400 trim will not work with the 600 series.
Date published: 2018-04-05
More Product Options
Explore options to create the perfect product to fit your needs and design style.Featured Accessories
RELATED PRODUCTS View Collection
