Monitor® 13 Series Tub & Shower Trim in Chrome

Hi, Sandy! Thank you for your question. We do have a renovation plate that matches the Brilliance Stainless Steel Finish on the Delta Monitor BT13410-SS Tub and Shower Trim Kit. The part number is RP29827SS. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP29827SS Best Regards, Rosanna

Thank you for your question. Delta Faucet model # B114900 is only available in Chrome. If you would like to switch to the Polished Brass finish, you will need to switch out the valve to an R10000-UNBX and then pick a trim that matches what you would like.

Hello Jimmy Patel, Thank you for your question. Unfortunately, we do not have a video for adjusting the limit stop on the Delta Foundations Shower B114915C faucet model. However, to adjust the limit stop: First, remove the handle and adapter nut on the faucet and set them aside. You will now see a small black o-ring on the end of the brass stem. Remove this o-ring and again set aside. The next piece is the limit stop, you may see the words hot/cold. Rotate this part clockwise for hotter water. Each notch you move the piece, it will increase the maximum hot water by approximately 2-3 degrees. Reinstall the o-ring, adapter and handle. Please see page 7 of the instructions linked below. https://media.deltafaucet.com/MandI/88723%20Rev%20A.pdf Best regards, Tanya

Hi, Mike D! Thank you for your question. Any new trim kit that starts with T13, T14, T17, and T17T will work with your existing valve body inside of your wall. Here is a link to the shower units: https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets Best Regards, Rosanna

Hi Candy, Thank you for your question! The shower head, tub spout, and cartridge are non-metallic. All other parts will be metal. Best regards, Jon

Hello Brian White, Thank you for your question. Based on your description of the flow from the tub/shower, you are experiencing an issue known as shower rise. This is an installation issue, which has several possible causes: The valve could be upside down. The length from the valve to the tub spout is outside of the 8" to 18" rule. There is more than one 90-degree angle elbow. Something other than ½" smooth copper or galvanized pipe was used going to the spout. No push fittings. No "shark-bite" fittings. No cast or drop ear elbows. Something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hi David, Thank you for your question. The movement on the handle of a 13 series tub/shower faucet is approximately 90 degrees. The cartridge is equipped with a rotational limit stop that allows you to set the max hot water temperature. Here is a link to a How to adjust the rotational limit stop video. http://www.deltafaucet.com/shopping-tools/research/video-gallery/video.html?v=n2_uZ7wgV1I&cat= The faucet will control the water temperature, but the house hold plumbing system will control how long it takes the water to get hot. If the faucet is a long distance away from the waterheater it will take the hot water longer to get to the faucet. Thanks, Dave

Thank you for your question. If your faucet turns on by turning the handle to the right or left, you have a 1300/1400 series faucet. You can use any 1300/1400 trim but you will need to keep your old cartridge. The cartridge that comes with the new trim will not work with your older valve. If you turn on your faucet by pushing up and then turning to the right or left, you have a 600 series faucet. The 1300/1400 trim will not work with the 600 series.

Hi, Glenn! Thank you for your question. The Delta B114915C Tub and Shower Unit does not have an adjustment for water flow. The volume for the unit only comes on at full volume. Best Regards, Rosanna

Hi, Will! Thank you for your question. Here is a link to the Maintenance and Instruction Guide for the Delta B114915C Faucet to show how to adjust the rotational limit stop on page 7: https://media.deltafaucet.com/MandI/101650%20Rev%20B.pdf Best Regards, Rosanna

Hi Larry, thank you for contacting Delta Faucet Company! Yes, the cartridge assembly included with our BT13410 will need to be adjusted to your preferred temperature. Please refer to page 12 box B in the link below. https://media.deltafaucet.com/MandI/107528%20Rev%20F.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Steve57, Thank you for your question about the Delta Faucet model BT13410. Please accept our apology for the inconvenience you are experiencing. We are happy to help! I first recommend removing the showerhead or tub spout. Flush the shower with full mix hot and cold with the showerhead or tub spout removed to clear trapped debris. The cartridge bonnet should be hand-tightened. The pressure balance valve needs both hot and cold water pressure to function correctly. Please reach out for further assistance or with any additional questions! Best Regards, Bryan

Hi Bruce, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing! Please reach out to us directly so we can further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Denis, Thank you for your question regarding our Delta Faucet BT13410. The BT13410 handle uses a 5/32" Allen wrench. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Mike, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. We will need more information to assist you better. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Emma Digital Communications Specialist

Hello Doug, Thank you for your question. We are happy to help! The Delta BT13410 tub and shower trim includes the RP64721 tub spout. This spout is metallic. Best regards, Bryan

Hi rcox, Thank you for your question about the Delta Faucet model BT13410. This tub and shower trim fits any R10000 series vale rough. Including model R10000-PFT-UN. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Jimbo! Thanks for the question. The BT13410-SS will not fit the valve in the wall using the RP70538 cartridge. You would need the R10000 series rough. Please contact us directly with any further questions or concerns. Best regards, Paul

Hi patty! Thank you for your question and we are happy to help. The BT13410 set screw comes with the handle replacement. The handle is part number RP36605. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi steve49, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Foundations® Monitor® 13 Series Tub & Shower Trim In Chrome MODEL#: BT13410 tub spout is a slip-on version and would only be able to be tightened with the set screw. If the tub spout is still spinning then the set screw may not be tightened all the way, Once tightened the tub spout should not spin. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello dennis, Thank you for reaching out to Delta Faucet Company! Our BT13410 uses our R10000 valves. You can change to any trim kit of your choice aside from our Integrated trim kits and our Foundations collection. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi marina, Thank you for contacting Delta Faucet Company! The BT13410 handle uses a 5/32" Allen wrench. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Daniel, Thank you for your question regarding our Delta Faucet B114915C. The H712 is not compatible with the B114915C trim kit. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Paul. I have sent you an email. If you need further information please contact us at 1-800-345-3358 or customerservice@deltafaucet.com. Best Regards Violet

Hi Seth, Thank you for your question! Yes, this trim kit will install onto your existing valve. However, you must use the existing RP19804 cartridge assembly. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello zwill, Thank you for your question, I would be happy to help. This trim kit comes with everything except the valve, the only product still needed would be part number R1000-UNBX. Please contact us back for any further questions or concerns. Best Regards, Nicole

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The max flow rate is 1.75 GPM @ 80 psi. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hello Jimbo, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! I have included the link below to our Delta Faucet Single Handle Tub And Shower In Stainless MODEL#: B114915C-SS parts diagram, this will provide you with part numbers for the individual parts. https://media.deltafaucet.com/PartsDiagram/DPD-B-B112915C_A.pdf Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hello Rocky, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our DELTA Single Handle Tub And Shower MODEL#: B114915C, and I am happy to help you! I have included a link to our how-to video, on replacing the Delta Faucet shower cartridge. Please see the link below. https://www.youtube.com/watch?v=QGjEgAUHX8c&t=316s Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hello Carl, Thank you for your question! I am happy to assist you! The Delta B114915C shower cartridge rotational limit stop can be adjusted by removing the handle and trim sleeve. After removing them, the handle adapter and o-ring can be pulled off. From there, the blue limit stop can be pulled off and rotated counterclockwise to allow for hotter water. Once it has been rotated, the stop can then be placed back onto the cartridge and all additional components can be installed into place as well. Please contact us back with any further questions. Best Regards, Skyler