Delta

Two Handle Flexible Mount

Model#: R2707

Download Image

R2707 is rated 4.5 out of 5 by 27.
  • y_2018, m_10, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_R2707, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 22ms
  • REVIEWS, PRODUCT
  • Solid fabricated brass end valves
  • 3-hole flexible deck or ledge mount installation
  • Backed by Delta Faucet’s Lifetime Limited Warranty
Finish: Not Applicable
List Price*: $141.95
Base Parts
R2707
List Price*: $141.95
  • 3-Hole Roman Tub Rough-in installation kit
  • Flexible deck or ledge mounting arrangement
  • Self-locating basis
  • Tighten/adjust from above the deck

Installation Information


3-hole 8"-16" installation


  • Deck Thickness: 2.25"
  • Valve Type: Washerless stem cartridge
Rated 5 out of 5 by from Great Seems to be what I needed
Date published: 2018-07-10
Rated 2 out of 5 by from Come on, Delta!!!! Delta has made great strides over the past decade with some very solid innovations to their lineup. This is not one of them. 1) Orientation of the valve stems is critical. Unlike most brands that use splines on their stems that allow for handle orientation in trim-out, these are not adjustable at all. If your rough-in is 5 degrees off, your handles are going to be off too. 2) The corrugated thinwall copper mixer drops are very difficult to 90 over to the mixer T. Even at 10" o.c. a great amount of stress must be placed on the assemblies. 3). The directions say that all three deck holes should be drill at 2". This is not true for the filler spout hole. Glad we checked.
Date published: 2017-01-07
Rated 5 out of 5 by from works perfectly plumber installed quickly with no problem
Date published: 2016-12-14
Rated 5 out of 5 by from Quality product No issues, seems quality, my plumber appreciated the parts
Date published: 2016-11-30
Rated 5 out of 5 by from Delta R2707 I bought this awhile back and Just Love them
Date published: 2016-11-30
Rated 5 out of 5 by from Great Product Bought these for the first house we built . Just built our second house and bought these again. Great product.
Date published: 2016-11-30
Rated 5 out of 5 by from Delta - roughin faucet I purchased this item about a year ago and received it quickly, and without issue. The part has been operating, fine.
Date published: 2016-11-30
Rated 5 out of 5 by from Good deal Very fast shipping and great price needed this for tub
Date published: 2016-07-10
  • y_2018, m_10, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_R2707, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • REVIEWS, PRODUCT

Can this be roughed into a concrete slab?

Asked by: JennyLynn
Hi, JennyLynn! Thank you for your question. We do recommend to install the R2707 in a deck mount that will have access for the supply lines under the valve body. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-10-04

What cartridge fits in this rough in?

Asked by: John
Hi, John! Thank you for your question. The Delta R2707 valve body uses RP24096 stem unit assembly. Here is a link to this part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP24096 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-08-31

Will this work for my Delta two handle roman tub trim model number BT2796?

Asked by: Brittany
Hi, Brittany! Thank you for your question. The Delta BT2796 roman tub faucet will work with the R2707 rough valve body. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-08-23

I won't be installing the spout in between the two handles (spout's in the corner of the tub, handles on the outside edge). Is there any reason I can't install the handles closer together than 8" as long as there's enough clearance for the levers?

Asked by: John98391
Hello! Thank you for your question. We advise of the 8" minimum installation centers so that the supply lines have enough room under the deck. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-08-22

can the flex supply line on R2707-S be replaced?

Asked by: april
Hi April, Thank you for your question. The supply lines of the Delta Roman Tub Rough-In Valve R2707-S are not replaceable, you would need to purchase a whole new valve. Best regards, Tanya
Answered by: Tanya
Date published: 2018-04-23

We installed the faucets, but they both turn clockwise. Thus, the cold turns on to the front, but the hot turns on to the back. What did we do wrong? Is it an easy fix?

Asked by: timj
Hi, timj! Thank you for your question. Please verify that the hot and cold supplies are turned off before disassembling the faucet. For both the hot and cold valve, install the stem with the permanent white stop on the right side. The removable 1/4 turn stop should be installed in the back on the cold side and in the front on the hot side. Next, tighten down the bonnet nut and rotate the brass stem so that the flat side is facing away from the spout (off position) and attach the handle. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-14

I have a T2705 Two Handle Roman Tub faucet and the cold water faucet suddenly got very hard to turn off and on. What is wrong?

Asked by: Janet Gunn
Hi, Janet! Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. We do recommend to flush the line and to make sure no debris is stuck inside of the valve body. If this does not fix the issue, we recommend to replace the stem unit assembly, RP24096: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP24096 Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-02

If my handles are facing incorrectly on finish what can I do to fix this? I.e.  I have to have the handles face inward towards the spout to keep the water from running. 

Asked by: Big Plumber Chris
Hi, Chris! Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. The stem unit assemblies maybe installed backwards. Please verify that the hot and cold supplies are turned off before disassembling the faucet. Remove the handles and unscrew the bonnet nut off of the valve stem. For both the hot and cold valve, install the stem with the permanent white stop on the right side. The removable 1/4 turn stop should be installed in the back on the cold side and in the front on the hot side. Next, tighten down the bonnet nut and rotate the brass stem so that the flat side is facing away from the spout (off position) and attach the handle. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-01
  • y_2018, m_10, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_R2707, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 11ms
  • QUESTIONS, PRODUCT