6-Setting 3-Port Diverter Trim in Stainless

Hello John, Thank you for your question. You will want to use the T11859 3 setting Diverter Trim with R11000 if you are using a shower head and a hand shower unit. The diverter tub spout assembly will need to be installed on the bottom port of the main R10000-UNBX valve body. Tub spouts can not be connected to the diverter valve. Best Regards, Tanya

Hi, Alissa. Thank you for your question. The Delta T11959-BL diverter trim kit works with our Delta R11000 diverter valve body. Best Regards, Rosanna

Hello Reginaob, Thank you for your inquiry! The Delta Trinsic 6-Setting Diverter Trim T11959-BL model has 3 shared settings and 3 individual settings, 6 settings in all. The setting depend on the three different shower units you install, such as shower head, hand shower or body sprays/jets. Please see page 6 of the below Maintenance/Installation document for the flow diagram. https://media.deltafaucet.com/MandI/92343%20Rev%20B.pdf Best regards, Tanya

Hi Valued Customer, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta faucets are made of several materials and may depend on which model you have. We can't provide that level of detail every time and specific amounts are considered proprietary (trade secret). But in general, the faucet may contain: Bronze Brass (36000, 260) (hub, handle, body, tube, fittings) Zinc (escutcheon, hub, handle) Stainless Steel (undercover plate, seat liner, set screw) Copper (tubing) PEX-C (puck and tubing) Silicone (gaskets) Synthetic rubber - EDPM, Santoprene (hoses) Vinyl (hoses) Nylon Plastics Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello, Mike! Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. This Delta Faucet model T11959-CZ Trinsic® 6-Setting 3-Port Diverter Trim In Champagne Bronze uses the RP51919 6-setting diverter cartridge. We apologize for any inconvenience this may have caused. Due to higher than normal demand on global supply chains and production capacities, we are not offering sales through our warranty line. You can typically obtain this cartridge through an online retailer. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Nate, Thank you for contacting us. I am sorry this information is not readily available and I would be happy to help you. The model T11959 is a diverter, and does not control flow or temperature. This unit diverts water from one item in your shower to the next. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Thank you for your question. The model T11959 and R11000 does not control the flow of our shower heads or hand showers. To be sure that your set up will meet the CALGreen requirement, you should check the flow rate of the shower head or hand shower itself.

Hi Valued Customer, Thank you for your question, I recommend purchasing T11859. This will allow you to function one the other or both at the same time. You will also need to purchase our R10000 valve and a 1300/1400 or 1700/17T series trims to complete the install. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com