Monitor® 13 Series Valve Only Trim in Chrome

Thank you for your question, Andrew! The RP19804 cartridge easily allows for a knob handle as well as a lever handle such as the H79 or RP48717 handles, which instead of being held to the front of the stem with a Phillips head screwdriver for a knob handle, will now be kept in place with an included set screw off to the side. A hot and cold indicator decal is also available for purchase. https://media.deltafaucet.com/PartsDiagram/DPD-B-T13020.pdf https://www.deltafaucet.com/parts-product-detail?modelNumber=RP17498 Best regards, Edward

Hello JakeMi24, Thank you for your question. As long as the screw holes on your large round escutcheon plate are at the 1 and 7 o'clock positions and you do not have a push button shower diverter directly below the off and on handle, then any of our trim kits that start with a T13 or a T14 will interchange for you. The cartridges that come with the new trim kits will not fit your valve body (if the unit was installed before 2006), so you will need to reuse your existing cartridge (RP19804). The trim kits are available in numerous finish colors including Pearl Nickel, Venetian Bronze and Stainless Steel. All of our current available trim kit options are shown on our website at www.deltafaucet.com. Best regards, Tanya

Hi Granny CK, Thank you for your question. The spacer may be needed depending on the installation. The spacer should be used if you slide the sleeve back all the way and there is a gap between the handle and sleeve. Best regards, Jon

Thank you for your question, Larry! We do offer a renovation plate when switching from a two handle faucet to a one handle faucet that may work for your situation as well. This is part number RP29827 which covers up to 8" center holes and is available for purchase in Chrome, Polished Brass, Venetian Bronze, and Stainless Steel. https://bit.ly/2KlCpWI Best regards, Edward

Hello Phil, Thank you for your question! I am happy to help you! Our Delta Faucet shower trim T13022 takes the universal valve R10000-UNBX, since you have this already the trim will have everything else you need for a valve only install. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Brutab, thank you for contacting Delta Faucet Company! We have a limited lifetime warranty on all parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. https://www.deltafaucet.com/warranty We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Bill, Thank you for your question! If the knob is turned counterclockwise to turn on, the screws around the knob should be at the lower left and upper right, and the cartridge is RP19804 with RP4993 seats and springs in the legs. If the knob is pushed up to turn on, see RP54870 for a 600 series kit. Replace RP4993 for a leak or drip when off. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Frank, Thank you for your question about the Delta Faucet model T13022. If leaking while off, recommended maintenance is to replace the RP4993 seats and springs in the legs of the cartridge. See the Maintenance and Installation manual for more information. https://media.deltafaucet.com/MandI/107528%20Rev%20D.pdf Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Alan, Thanks so much for contacting Delta Faucet Company! The Renovation Kit MODEL#: RP54870 can be used to change your knob to a lever handle. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Buddy, Thank you for your question! I am happy to help you! The Delta T13022 would take the RP4993 for a leak, I have also attached the parts diagram for this model below. https://media.deltafaucet.com/PartsDiagram/DPD-B-T13020%20Rev%20B.pdf Please contact us back for any further questions. Best Regards, Nicole

Hi Rick! Thank you for contacting us at Delta Faucet! I will be happy to help! Yes, you can purchase the H71 separately. Please contact us directly if further assistance is needed at this time.  https://www.deltafaucet.com/parts/product/H71.html Best Regards, Tim

Hi Karen, Thank you for your question about the Delta Faucet model T13022. Yes, this trim fits the same MultiChoice valve roughs that the T13220 uses. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Karen, Thanks so much for contacting Delta Faucet Company about the T13022! If the shower was installed after 2006, the rough valve should be the universal R10000. This means you could install any T13/14, T17, and 17T trim kit. However, if your shower was installed before 2006, then you would only be able to upgrade 1300/1400 to a T13/14. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi May128, Thanks so much for contacting Delta Faucet Company! The T13022 escutcheon plate is 7" in diameter with set screws located at 1 o'clock and 7 o'clock and is manufactured to fit Delta Faucet rough valve only. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi sjjvesper, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Delta Faucet Classic Monitor® 13 Series Valve Only Trim In Chrome MODEL#: T13022. Here is what we can do to resolve your issue for you. Low flow is caused by a blockage or debris, we would recommend flushing the shower unit. When water is shut off and back on it allows debris to move around in your water lines which is caught would cause the lower than normal flow rate. I have included the flushing instructions below. To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Bones, Thank you for your question regarding our Delta Faucet T13022. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. It sounds as though the rotational limit stop may not have been adjusted. The rotational limit stop is used to limit the amount of hot water available such that, if set properly, the user will not be scalded if the handle accidentally is rotated all the way to “hot” when a person is showering or filling a tub. The first position allows the LEAST amount of hot water to mix with the cold water in the system. In the first position, the water will be the coldest possible when the handle is turned all the way to hot. As you move the rotational limit stop counterclockwise, you progressively add more and more hot water in the mix. The last position to the left will result in the greatest amount of hot water to the mix, and the greatest risk of scald injury if someone accidentally turns the valve handle all the way to the hot side while showering or filling a tub. To adjust the temperature of the water coming out of the valve, pull the disc back to a position where it is possible to remove the rotational limit stop and readjust the teeth engagement position to the desired temperature. Clockwise will decrease the outlet temperature, counterclockwise will increase the outlet temperature. Temperature change per tooth (notch) could be 4° - 16°F based on inlet water conditions. Repeat as necessary. Push disc until fully seated. If you would like installation help, you may contact our residential warranty line directly at 800-345-3358 (prompt 2, then 4). We also have how-to videos on our website and on our YouTube channel. https://www.deltafaucet.com/service-parts/how-to-videos Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our T13022 uses RP46074 or RP19804. If the rough-in valve is older than 2006, you will need RP19804, and if it is newer than 2006 you will need RP46074. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Eddie, Thank you for your question regarding our Delta Faucet T13022. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Judy, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you in resolving this issue as quickly as possible. The Delta Faucet CLASSIC Monitor® 13 Series Valve Only Trim In Chrome MODEL#: T13022 does include the valve cartridge. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello JAG84, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model T13022 Monitor® 13 Series Valve Only Trim can be replaced with any 13/14 MultiChoice (MC) shower trim. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi bb32, Thank you so much for contacting Delta Faucet Company! The Classic T13022 can be replaced with the same model or any Delta Faucet 13/14/17/17T MultiChoice (MC) series shower valve trim. Please reach out with further questions! Best Regards, Skyler

Hi glennO, Thank you for your question! Yes, we offer the RP54870 600 series renovation kit which will replace the current trim kit. https://deltafaucet.com/parts/product/RP54870.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Jkelly2732, Thanks so much for contacting Delta Faucet Company! This model will utilize the RP19804 cartridge if the rough-in valve in the wall was installed prior to April of 2006. If installed after this date it will use the RP46074 cartridge. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Keith B, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you. The Delta Faucet CLASSIC Monitor® 13 Series Valve Only Trim In Chrome MODEL#: T13022 can be replaced with any of our 13/14 series trim kits. Please visit our website to view all of our available options. You can filter by the finishes you're looking for, I have attached the link below. https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?prefn1=narrowResults&prefv1=hideDiscontinued&prefn2=recertified&prefv2=false&cgid2=Delta_Bathroom_Showering_Tub-and-Shower-Faucets_Shower-Valve Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello, Daniel! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! This Delta Faucet model T13022 Classic Monitor® 13 Series Valve Only Trim In Chrome will only control the temperature. The 17 Series shower trim kits offer independent temperature and flow control. Please see the following link for more information. https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?prefn1=narrowResults&prefv1=hideDiscontinued&prefn2=recertified&prefv2=false&prefn3=valveType&prefv3=Dual-function%20pressure%20balance%20cartridge&cgid2=Delta_Bathroom_Showering_Tub-and-Shower-Faucets_Shower-Valve Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist

Hi Keith! Thank you for your question and we are happy to help. The Delta T13022 handle button can be purchased as part number RP20542. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie