Monitor® 14 Series Valve Only Trim in Stainless

Hi! Thank you for your question and I am sorry to hear that you are experiencing installation issues with your shower unit. Unfortunately, we do not have a square-type renovation kit that will work to cover your tile. I apologize for this inconvenience. Best Regards, Rosanna

Hi Glo, Thank you for your question. The R10000-UNBX rough in valve will work with the Ashlyn T14624-SS and T17064-SS trims. The T14624-SS shower trim and the T17064-SS valve only trim are the trims only, the parts on the outside of the wall plus the cartridge. They do not include the rough in valves that must be purchased separately . Thanks, Dave

Hi, Homeontherange! Thank you for your question. The RP77991 Extension Kit does fit the Delta Monitor T14064-RB Valve Trim Kit to add 1 3/4" extension. Here is a link to the kit: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP77991 When ordering this extension kit, we recommend purchasing RP12630RB escutcheon screws. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP12630RB Best Regards, Rosanna

Hi Melanie, Thank you for your question about the Delta Faucet model T14064-SS. A replacement handle and set screw are available as RP77090SS. https://www.deltafaucet.com/parts/product/RP77090SS.html Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello angie, Thank you for contacting us, I would be happy to help you. Unfortunately our 14 series does not have a separate temperature and volume control, due to this you can not pre set the temperature. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Ryan, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Delta Faucet Ashlyn® Monitor® 14 Series Valve Only Trim In Stainless MODEL#: T14064-SS. Here is what we can do to resolve your issue for you. We would recommend flushing, debris can cause the cartridge to not seal properly. To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend doing this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Doobs, Thank you for your question! I am happy to help you! Our Delta T14064-BL handle is 3" long and lines up with the outer rim of the escutcheon. Please contact us back for any further questions. Best Regards, Nicole

Hello Mr. Richard, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Ashlyn® Monitor® 14 Series Valve Only Trim In Chrome MODEL#: T14064 is 6". Please see the specification sheet with the dimensions in the link below. https://media.deltafaucet.com/SpecSheet/DSP-B-T14064%20Rev%20F.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar