Monitor® 14 Series Shower Trim in Chrome

Hello Mike, Thank you for reaching out to Delta Faucet Company! The set screw for the handle on our T14235 is RP102139. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi greg, Thanks so much for contacting Delta Faucet Company! This shower model will only work with an existing R10000-UNWSHF rough0in valve. Please see the following link for more information. https://www.deltafaucet.com/bathroom/product/R10000-UNWSHF.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! For retailers, the Saylor T14235-BL has a projected ordering date of 9/27/2022 and a projected shipping date of 10/27/2022. Starting 10/28/2022 the product will be available to be ordered by the public. Please reach out with further questions! Best Regards, Skyler Digital Communications Specialist

Hi RDmom, Thanks so much for contacting Delta Faucet Company! The SAYLOR™ Monitor® 17 Series Tub & Shower Trim MODEL#: T17435 will be available to order on 9/27/2022. Products can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet T11835. We have reached out to you directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hi Eddie, Thanks so much for contacting Delta Faucet Company! I have included two links, the parts diagram for model T17035 and the Where To Buy section on our website. https://media.deltafaucet.com/PartsDiagram/DPD-B-T17035.pdf https://www.deltafaucet.com/where-to-buy Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Jonathan! Thank you for your question and we are happy to help. The Delta FVS6-SA2101-SS is made of several materials which may include but are not limited to: Bronze, Brass, Zinc, Stainless Steel, Copper, PEX-C, Silicon, Synthetic rubber, Vinyl, Nylon, and, Plastics. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi Maryann, thank you for your interest in the T14235-SS! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi mikadams, Thanks so much for contacting Delta Faucet Company! The T17235 would retro fit the pre-2006 1700 rough valve only. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The cartridge is RP46074. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi JCK5, Thanks so much for contacting Delta Faucet Company! To change spray modes on the SAYLOR™ Monitor® 17 Series Shower Trim MODEL#: T17235 shower head, push the button to the desired setting. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Ron1802, Thank you for your question about the Delta Faucet FVS6-SA2101-CZ. This bundle includes all parts for a shower faucet. Valve rough and diverter rough are included. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The Delta T14235-BL turns 120° maximum handle rotation. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Adele, Thank you so much for contacting Delta Faucet Company! The Saylor T14435 installation guide can be viewed using the below link. https://media.deltafaucet.com/MandI/107528%20Rev%20E.pdf Please reach out with further questions! Best Regards, Skyler Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize this information was not readily available to you and we are happy to help! The rotational limit stop can be found on pages 11 and 12 in the link below. https://media.deltafaucet.com/MandI/107528%20Rev%20I.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi terry, Thank you for your question! For this model we recommend the R10000-UNWSHF. Please see the following link for more information. https://www.deltafaucet.com/bathroom/product/R10000-UNWSHF.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Cathy, Thank you for your question about the Delta Faucet model T17235. There is a set screw under the cover that uses a 3/32" Allen wrench. A nonmetal tool like a card can be used to work the cover out. Or if there is a hole, a toothpick or skewer. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Dave, thank you for contacting Delta Faucet Company! To remove the handle on T17435 you will need the 3/32" inch allen wrench. Please also shut the water off if you are planning to remove more than the handle. 1. Please remove the temperature cap located under the pointer part of your handle with the 3/32" inch allen wrench. 2. Once this piece is removed, you will see a plastic piece held in by a philips screwdriver. Please remove this part and be very careful not to drop the screw or the Rotational Limit Stop (looks like a black cog). Please note how this piece is installed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Ryan! Thank you for your question and we are happy to help. The Delta FVS6-SA2101-BL bundle is not available without the rough in. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Valued Customer, Thank you for your question regarding our Delta Faucet FVS6-SA2101. Unfortunately, we do not offer a 1700 series trim kit similar to this trim. The 1700 series would need to be purchased separately. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Clyde, Thank you for your question about the Delta Faucet model T17235. The outside handle is about 3.5" from the wall. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Esther! Thank you for your question and we are happy to help. To change the spray patterns of the Delta T17235 shower head, push the button to the desired setting. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Dave, thank you for contacting Delta Faucet Company! If you are removing the parts from your shower, please turn the water off to either the home or the valve. Please refer to the instructions below on how to remove our 17 series handle. 1. Please remove the temperature cap located on the tip of your handle by placing your fingers on the 'pointer' of the temperature cap and peeling upwards. This will be a little difficult as it is clipped into the temperature knob. 2. Once this piece is removed, you will see a plastic piece held in by a philips screwdriver. Please remove this part and be very careful not to drop the screw or the Rotational Limit Stop (looks like a black cog). Please note this black cog piece goes in one way. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Customer! Thank you for your question and we are happy to help. Models with two handles allow flow and temperature. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello, Thank you for your question. I have included the flushing instructions below. To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Please contact us back if you have any questions or need further assistance. We appreciate your business and look forward to continuing to serve you. Best Regards, Themar Digital Communications Specialist

Hi Kevin317, Thank you for contacting Delta Faucet Company! No, we do not have a matching overflow plate for our Saylor series. We apologize for any inconvenience this may cause! We appreciate your feedback. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Donald, Thanks so much for contacting Delta Faucet Company about the T17435! We do not have a unit with all metal components. Our Delta product is a mixture of metallic and non-metallic material, Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist