Monitor® 14 Series Shower Trim in Stainless

Hi Louise, Thank you for your question. The showerhead that comes in the model T14264-RB shower trim can be ordered as a separate part. The RP64859RB showerhead can be purchased online at deltafaucet.com or ordered from your local retailer or wholesaler that sells Delta products. http://www.deltafaucet.com/repairparts/details/rp64859rb.html Thanks, Dave

Hello! You will need the R10000-UNWSHF valve for shower only application. https://www.deltafaucet.com/bathroom/product/R10000-UNWSHF.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Thank you for your question, Troy! There is a link to the parts diagram on model T14264's web page, which does list the part number of the cartridge. The part number of that cartridge is RP46074. That cartridge can be easily found at most hardware stores, that are authorized to carry Delta products. I have included a link to the RP46074's web page, for you to refer to. Feel free to contact us directly, if you need further assistance. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP46074 Best Regards, Benjamin

Hi, Jerry! Thank you for your question. Thank you for your question. There is a rotational limit stop (RLS) at the temperature control to adjust the hot water limit. To adjust the RLS, first remove the temperature cover and take a phillips head screw driver and turn the set screw counter clockwise to remove. Remove the gray knob. Behind the knob, you should see a black disk. Take the disk and take it out and place the disk to the hotter side. The hot side should be up against the iron piece that is sticking down on the volume handle. Once adjusted, reinstall all handle parts. Best Regards, Rosanna

Hi, Marie! Thank you for your question. The Delta Monitor T14264 shower trim kit will require a Delta MultiChoice Universal R10000 rough valve body which is sold separately. Here is a link to these: https://www.deltafaucet.com/search-results?searchTerm=r10000&searchType=Delta_Default Best Regards, Rosanna

Hi Dave, Thank you for your question. The gray piece in the back of the shower head is a debris screen. Removing it will not increase the flow rate. Best regards, Jon

Hi edmond l, Thank you for your question. The external trim parts are metallic, except for the shower head. Best regards, Jon

Hi Mark, Thank you for your question about the Delta Faucet model T14264-SS. This shower can be used with most showerheads and accessories. A shower arm diverter can be used to add an outlet for a hand shower hose. Or the showerhead can be replaced with a two-in-one showerhead. https://www.deltafaucet.com/search-results?q=%22shower+arm+diverter%22&lang=en_US&section=delta https://www.deltafaucet.com/bathroom/showering/showerheads-hand-showers/two-in-one Please reach out with any additional questions! Best Regards, Bryan

Hello Mickey Mouse! Thank you for your question! I am happy to help. The Delta Ashlyn Series does offer a variety of different faucets. Please follow the link I have provided to view the entire collection: https://www.deltafaucet.com/search-results?q=ashlyn&lang=en_US Please reach out to us directly if you need further assistance. Best Regards, Antoine

Hi George, Thanks so much for contacting Delta Faucet Company! I have included a link below to show the cleaning and care for our faucets, including the T14264-SS. https://support.deltafaucet.com/s/article/Cleaning-and-Care Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Sharon, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Ross, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet ASHLYN® Monitor® 14 Series Shower Trim MODEL#: T14264-SS tub port can be plugged, This will allow for a shower-only install. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Thank you for your question, Byron! No, Delta Ashlyn model T14264-BL is not compatible with a Delta RP32104 cartridge assembly. Model T17264-BL is the shower trim in the Ashlyn line that is compatible with the RP32104 cartridge. https://www.deltafaucet.com/bathroom/product/T17264-BL Best Regards, Benjamin

Hi Ronnie, Thank you for your question regarding our Delta Faucet T14264-RB. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Marshal, Thank you for your question! I am happy to help you! Our Delta Faucet ASHLYN® Monitor® 14 Series Shower Trim MODEL#: T14264-BL takes the seats and springs RP4993, Please see the link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-B-T14064_A.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Bob cav, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. This Delta Faucet model T14264-BL Ashlyn® Monitor® 14 Series Shower Trim In Chrome can be installed onto your existing R10000-UNBX rough-in valve. However, if your valve was installed prior to 2006 you must use your existing cartridge assembly and not the one included with the new trim kit. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist

Hello Brian, Thank you for your question about the Delta Faucet model T14264-BL Ashlyn® Monitor® 14 Series Shower Trim In Matte Black. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! This trim kit is designed to fit a Delta MultiChoice valve rough-in. If your faucet was installed after 2006 and uses an R10000 valve rough-in, This trim kit can replace the existing trim. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Randy28, Thank you for your question! Unfortunately there is no way to increase the flow rate of this model as it is a water conserving model with a maximum flow rate of 1.75gpm. We apologize for any inconvenience this may have caused.d Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Good morning Smitty20! Thank you for your question! Our 1400 series showers rotate counterclockwise to turn on. The further counterclockwise you turn the handle, the more hot water is received. Please contact us back for any further questions. Best Regards, Frank

Hi Valued Customer, thank you for your interest in the T14264-BL! Please refer to the Maintenace and Installation sheet in the link below. https://media.deltafaucet.com/MandI/107528%20Rev%20F.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Joeycrews, Thank you for your question about the Delta Faucet model T14264-BL. For a tub and shower, this shower trim can be used with a tub and shower valve and a diverter tub spout. Or the trim model T14464-BL includes a diverter tub spout. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Remy, Thank you for your question about the Delta Faucet model T14264-RB. Yes, R10000-IPWS is compatible. This shower trim uses an R10000 series valve rough. Please reach out with any additional questions! Best Regards, Bryan

Hello, Thank you for your question! Please see the following link to allow for more hot water into the mix. https://www.youtube.com/watch?v=L3ty-H1V01I Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Chris, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our Delta Faucet Ashlyn® Monitor® 14 Series Shower Trim In Chrome MODEL#: T14264, and I am happy to help you! If this unit is having a leaking issue, we first would recommend a flush, If the flush does not work we then would ask to replace the RP4993 seats and springs. Lastly, if that does not fix the issue, then we would recommend replacing the whole cartridge, RP46074. Please see the parts diagram link below, as well as the flushing instructions. https://media.deltafaucet.com/PartsDiagram/DPD-B-T14064_A.pdf To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hi JoeY, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Ashlyn® Monitor® 14 Series Shower Trim In Matte Black MODEL#: T14264-BL is compatible with RP19804. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hi pkamhi, Thanks for your question regarding T14264-BL! This model has a maximum flow rate of 1.75 GPM at 80 PSI. We do not recommend removing or modifying the flow restrictor as this will void the warranty and may cause it to no longer comply with state or federal plumbing codes. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Bobb, Thank you for your question! Yes, this model includes a pressure balance cartridge which features a spool which slides to the hot or cold side when there is a loss of pressure detected on either side to prevent scalding or too much cold water in the mix. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet T14264-RB. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com