Monitor® 17 Series Valve Only Trim in Stainless

Hello, Thank you for your question! You can install any new trim kit and tub spout onto your existing rough-in valves. However, you must use the existing cartridges and not the one included in a new trim kit. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Dennis W, Thank you for your question. The Delta Trinsic Valve Trim T17059-CZ contains a rotational limit stop that may need adjusting to allow more hot water to flow through the valve. Included here are the instructions for adjusting the limit stop. We’ve teamed up with DIYers, Mike and Hannah to create a new collection of simple “How-To” troubleshooting and installation videos. The directions are on page 7 of this below document link. https://media.deltafaucet.com/MandI/76652%20Rev.%20G.pdf Best regards, Tanya

Hello Thank you for your question! You can replace update your existing trim without needing to install any other components! Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Mtka Mike, There is in fact a big difference between the two. The T17059 is a regular monitor 1700 series. The T17T059 is from the same Trinsic collection but with a thermostatic cartridge. TempAssure Thermostatic valves monitor the temperature of the water and adjust the mix automatically to maintain precise temperature control and to keep the water temperature in your shower within a safe ±3° F (±1.6° C). This provides a more consistent temperature than pressure balanced valves can supply. TempAssure valves also feature an adjustable high-temperature limit stop that when properly set helps ensure the handle cannot be turned to a position that is too hot for comfort. And because TempAssure measures the temperature of water, the handle limit stop will not need to be adjusted for seasonal ground water temperature changes. This information can but found under the smart solutions tab. Once your there you can click on Tempassure tab. Below is a link to this same information. https://www.deltafaucet.com/design-innovation/innovations/shower/tempassure-valve--monitor-valve Best regards, Tanya

Hi Ryanoutloud, Thank you for your question. If your 1700 series faucet is older than February 2006 and the top of the cartridge is white then the RP32104 is the correct replacement cartridge. If newer than February 2006 and the cartridge has a gray top then RP46463 would be the correct part. Thanks, Dave

Hi Mike, Thank you for your question. You are correct, there is not a Trinsic 17T option available. Unfortunately, you cannot just put the cartridge for the 17T on a 1700 series and use the same handle. It will not fit. Thanks. Jody

Thank you for your question, susan! Yes, the RP23336 o ring comes included with model T17059-SS. Best Regards, Benjamin

Hi Jack, Thank you for your question regarding our Delta Faucet T17059-SS. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello KG15, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet TRINSIC® Monitor® 17 Series Valve Only Trim MODEL#: T17059-CZ has a large volume control that will turn the water on and off, then a smaller temperature control handle to adjust the temperature. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Dave, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Trinsic® Monitor® 17 Series Valve Only Trim In Chrome MODEL#: T17059 is a pressure balance shower trim and I have included a link below to show the difference between the pressure-balanced and thermostatic valves. https://www.deltafaucet.com/design-innovation/innovations/shower/tempassure-valve--monitor-valve Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello! The temperature knob will pop off with a bit of pressure as there is not a screw which holds it on. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello, Miss Sadie! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Trinsic® Monitor® 17 Series Valve Only Trim In Matte Black MODEL#: T17059-BL escutcheon is metal. The temperature knob and cover are non-metallic. Our Delta product is a mixture of metallic and non-metallic material, Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar

Hello Whitney, Thank you for your question. We are happy to help! To remove the temperature control knob of the Delta T17059, the knob cover will unsnap at the rear of the knob cover then unhook the front of the cover. The knob can then be unscrewed. Best regards, Bryan

Hi Ray1261, Thank you for contacting Delta Faucet Company! You can use any of our current 1700 series tub/shower faucets with the 1500 series valve, or older 1700 series that uses the RP32104 cartridge. The 17T thermostatic cartridges are designed to work with our newer MultiChoice rough-in valves, they are not compatible with the 1500 or older 1700 series valves. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Matt, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Monitor® 17 Series Valve Only Trim In Matte Black MODEL#: T17059-BL would fit the pre-2006 rough end valve in the wall as long as the previous trim kit was also a 1700 series. The trim would fit, however the new cartridge would not. You would keep the original rough and cartridge installed and use only the trim pieces from the new product. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole Digital Communications Specialist

Hello Matt! Thank you for your question and we are happy to help! The instructions on how to adjust the rotational limit stop for the Delta T17059 is linked below on page 10: https://media.deltafaucet.com/MandI/107529%20Rev%20D.pdf With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hello shannon, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our Trinsic® Monitor® 17 Series Valve Only Trim In Chrome MODEL#: T17059, and I am happy to help you! The shower unit can be adjusted, I have attached a link to show how to adjust the RLS on our Delta shower cartridges. This will provide the option of hotter water, also, we recommend making sure the water heater temperature is set to 120 or lower. https://www.youtube.com/watch?v=By5b7uazCqM Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Timsteele88, Thank you for contacting us. I apologize for the issue you are experiencing with your Delta shower faucet and I am happy to help you. The temperature can be adjusted by rotating the knob on the front of the volume handle. The rotational limit stop can be adjusted to set the maximum temperature. To do this, remove the temperature knob cover by prying it by hand at the tip. This should pop it off of the gray knob, allowing you to remove the Phillips head screw. Pull off the knob to access the RLS and set it to the desired position. Please refer to section 5 of the below installation instructions for more information. https://media.deltafaucet.com/MandI/107529%20Rev%20D.pdf Please contact us back directly with any further questions. Best Regards, Skyler

Hi a2leachd, Thank you for your question about the Delta Faucet model T17059-BL. To remove the temperature knob cover, disengage the rear snap and unhook the front of the cover from the knob. Secure the temperature knob with the screw under the cover. See step C-2 on page 10 of the installation instructions: https://media.deltafaucet.com/MandI/107529%20Rev%20G.pdf Please reach out with any additional questions! Best Regards, Bryan

Hi Wallace, thank you for your interest in the T17059-BL! The temperature knob can be removed by grasping it tightly at the back rounded end and popping the small tab off of the cover below. Once the back tab pops out of place the knob can be completely removed by sliding the additional tab off from its place. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Valued Customer, Thank you for your question. Yes, the trim is compatible with R10000-IPWS. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hi Rick Rolfe, Thank you for your question about the Delta Faucet model T17059-BL. The parts diagram is available here: https://media.deltafaucet.com/PartsDiagram/68882-PD-59.pdf Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The Delta 17 series cannot replace a 14v series trim kit or rough end. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello joeP, Thank you for your question. The T17059-BL trim kit will replace any trim, including a 13/1400 series, installed into the Delta MultiChoice valve we introduced in 2006. If your 13/1400 trim was installed before 2006, you can use a current T13/T14 trim. The new handle will work on the old cartridge. But the T17059-BL will not work. Please feel free to reach out to us directly if you have any further questions. Best regards, Bryan

Hello DeltaHelp123, Thank you for contacting us, I would be happy to help you. Our Pre 2006 1700 series valve would accept the new T17 trim kit however, you would need to purchase a new RP32104. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Cara, Thanks so much for contacting Delta Faucet Company! The T17059-BL requires the R10000-UNWS, the HF is normally used for shower only installations. If you are looking to install a shower head and handshower you would also need a diverter and elbow. We have two versions of installation: Elbow: https://www.deltafaucet.com/parts/product/50560-BL.html Options 1: Purchase an R11000 rough end and T11800 trim kit, please see the link below to the rough and trim. This would also require you to add two holes in the wall for plumbing. https://www.deltafaucet.com/bathroom/product/R11000.html https://www.deltafaucet.com/bathroom/product/T11859-BL.html Option 2: If you do not want to add any extra holes in the wall, then we would recommend the 3-way diverter that attaches to the shower arm and allows the hose to attach for flow. Please see the link below. https://www.deltafaucet.com/bathroom/product/U4929-BL-PK.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Scott! Thank you for your question and we are happy to help. The diameter of the Delta T17059 is 6 1/2". With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie