Angular Modern TempAssure® 17T Series Valve Trim with 6-Setting Integrated Diverter in Chrome

Hello CRTM, Thank you for you question. We would recommend installing the handle valve inside the shower for access to the temperature adjustment and diverter. The showering components can be installed on a different wall than the valve. However, the Delta Angular Modern 17T Series 6-Setting Trim T27T967 unit can only divert between three components. The fourth showering component would require a separate rough-in valve and trim. Please feel free to reach out to our customer service team at 1-800-345-3358 or customerservice@deltafaucet.com if there is anything else you need. Best regards, Tanya

Dear GP2, Thank you for your question. A hand shower and both shower heads can be installed with the Delta Angular T27T967 valve trim. This will allow each individual unit running by themselves and 3 shared positions between each item. Best regards, Tanya

Thank you for your inquiry, Deborah! The Delta Angular Modern Integrated 17T 6-Setting T27T967 Trim Kit will allow you to run each of these components individually or any combination of two together. The fourth showering component would require a separate rough-in valve and trim. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Dear Scott Brennan, Thank you for your question. The Delta Angular Modern T27867 and T27967, 3 and 6 Setting Integrated Diverter and Trim, are used when adding handshower, body sprays, or another showerhead. The top handle is the diverter handle, to switch from one or combination of two running at the same time. If you are adding one extra showering unit, you would use the 3 setting and if you are adding two extra showering units you would use the 6 setting. Best regards, Tanya

Hi Damien, Thank you for your inquiry! The Delta Angular Modern 6-Setting Shower Trim T27T967-SS in the Stainless finish would be the closest finish matching a Brushed Nickel finish. https://www.deltafaucet.com/bathroom/product/T27T967-SS Best regards, Tanya

Hello DaveAZ, Thank you for inquiry! I am glad you were able to correct your faucet issue. Thanks for sharing your experience and for being a Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hello Graham, Thank you for contacting us, I would be happy to help you. The Vibration and noise are caused by debris or blockage, We would recommend a complete flush of the system. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" allen screw. So you will need to use the appropriate size allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend do this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Lene! Thank you for your question and we are happy to help. The Delta T27T967 temperature knob is RP84980 and the control handle is RP84981. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello DC47! Thank you for your question and we are happy to help! The temperature control knob is made of mixed materials to avoid rusting or deterioration as if it were made completely of metals, there is a higher possibility of it rusting and needing to be replaced earlier on. If you are hearing grinding, we recommend loosening up the handle as it should not be "very tight". We also recommend soaking these parts in 50% warm water and 50% white vinegar to break up any debris or hard water build-up. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi Clay, Thanks for your question regarding T27T967! No, our Delta product is a mixture of metallic and non-metallic material, Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello! Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! Please refer to the link below to our Maintenance and Installations sheet! chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://media.deltafaucet.com/MandI/107533%20Rev%20F.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi GA DAWG 71, Thank you for your question about the Delta Faucet model T27T967-RB. The handle set screw is located on the top of the handle when the handle is pointed down. To remove the temperature knob cover, first disengage the larger snap on the knob cover. See step 4 A1 of the installation instructions for more information: https://media.deltafaucet.com/MandI/107533%20Rev%20F.pdf Please reach out with any additional questions! Best Regards, Bryan

Hi Refturner, Thank you for your question about the Delta Faucet model T27T967-SS. Our TempAssure thermostatic shower trims do have a higher total flow rate than our pressure-balanced trims. It should help, but the body sprays may still not have full flow. The total flow rate also depends on the home water pressure and the valve rough. With a TempAssure trim, if the valve rough is R22000, for a total 7.5 gpm for the body sprays, the water pressure would need to be at least about 70 psi. A 9.25 gpm total flow would require higher water pressure close to our recommended maximum of 100 psi. R22000-WS valve rough total flow rate is a little less, typically one gpm or less difference. Please reach out with any additional questions! Best Regards, Bryan

Hi Edie, Thanks so much for contacting Delta Faucet Company! No, this model does not feature the SpotShield technology. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello DaveK, Thank you for contacting us, I would be happy to help you. Our Delta T27T867 is 3 setting and the T27T967 is the 6 setting, the trim will come with the cartridge needed for the functions. Our R22000-WS is universal and will accept any of those trim kits. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi GIMR, Thanks for your question regarding T27T967-SS! No, this model does not have a tub spout port. The recommendation is to use an R10000-UNWS, R11000, and matching trim. I have included a few links below. https://www.deltafaucet.com/bathroom/product/R10000-UNWS.html https://www.deltafaucet.com/bathroom/product/T17T453-SS-WE.html https://www.deltafaucet.com/parts/product/R11000.html https://www.deltafaucet.com/bathroom/product/T11853-SS.html I also included a few links to the hand shower options, and the elbow needed to finish the installation. https://www.deltafaucet.com/bathroom/product/55530-SS.html https://www.deltafaucet.com/bathroom/product/57530-SS.html https://www.deltafaucet.com/parts/product/50570-SS-PR.html Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Zeb1, Thank you for your question! Please see the following link for purchasing this model in your area. https://www.deltafaucet.com/where-to-buy?pid=T27T967-BL Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Billy, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Angular Modern TempAssure® 17T Series Valve Trim With 6-Setting Integrated Diverter In Venetian Bronze MODEL#: T27T967-RB does not include the shower head or hand shower, unfortunately those would need to be purchased separately. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Jose M, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Angular Modern TempAssure® 17T Series Valve Trim With 6-Setting Integrated Diverter In Venetian Bronze MODEL#: T27T967-RB is still currently being sold, I have included a link below to other integrated shower trims in RB. Please see the link below. https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?cgid2=Delta_Bathroom_Showering_Tub-and-Shower-Faucets&prefn1=featureFacet&prefv1=FltIntegratedDiverter&prefn2=finish&prefv2=Venetian_Bronze&prefn3=narrowResults&prefv3=hideDiscontinued&prefn4=recertified&prefv4=false Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole