Delta®
Single Handle Floor Mount Tub Filler Trim with Hand Shower in Venetian Bronze
Model#:
T4759-RBFL
PRODUCT FEATURES
Complete your bath with a beautifully designed Delta roman tub faucet, meticulously crafted to turn heads and enhance your experience. The included hand shower makes this a versatile addition to your bath, perfect for rinsing off, washing loved ones and pets or keeping your tub clean. Matte Black makes a statement in your space, cultivating a sophisticated air and coordinating flawlessly with most other fixtures and accents. With bright tones, Matte Black is undeniably modern with a strong contrast, but it can complement traditional or transitional spaces just as well when paired against warm neutrals for a rustic feel akin to cast iron. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
- Coordinating hand shower included
- Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up from the spray face of your shower head and hand shower with the touch of a finger
- Spray settings include: Full Body spray
- Full body spray provides a steady, full-coverage spray perfect for every shower need, from rinsing shampoo from hair to relaxing tired muscles
- ADA Compliant
- Trim kit only, must purchase rough-in R4700-FL separately to complete the unit
- Hand shower includes double check valves for backflow protection
- Single hole installation
- High-arc spout swivels 360degrees
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Eco-Friendly
WaterSense® Labeled
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
Single hole installation
Flow Rate :
1.75 gpm @ 80 psi, 6.6 L/min @ 552 kPa
Overall Height (in.) :
41
Valve Type:
Single-function pressure balance cartridge
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
SimpJ from
Very nice
Champaigne Bronze looks beautiful. Very well made and sturdy. Really high flow fills the tub quickly. Shower handle does dribble water down the braded hose for a few seconds after shutting off, getting a little water on the floor, but leave the handle in the tub until it drains prevents this.
Date published: 2025-12-09
Rated 1 out of
5
by
Hickmannc from
Hand Spray Leaks and Finish wearing off.
We have had it installed for about 2 years and now we need to keep a towel on the floor to catch the water leaking from the hand sprayer.
Date published: 2025-11-27
Rated 3 out of
5
by
BRobin from
Beautiful, but drips
Very pretty, I love it - but a little over a year after installing it, it drips - more like runs. So annoying. I feel the Delta products are cheap now days. I guess I'd still recommend it, since buying all metal is incredibly expensive.
Date published: 2025-03-28
Rated 5 out of
5
by
BrendaP from
Beautiful tub filler
Love the Delta single handle floor mount tub filler. I have been using this daily since installation and it works great. It also looks beautiful! Would definitely recommend.
Date published: 2025-02-26
Rated 5 out of
5
by
stephfrrbs_378 from
Delta Handle Floor.
Luxury bathtub faucet with hand shower, high-end and excellent quality with all its installation kit and matte black color, makes your bathroom stand out among the rest, due to its beautiful shape and it is also high
•HAND SHOWER
LENGTH
9.13 inches
•HEIGHT
41 inches
•SPOUT REACH
8 inches
•It has quality for life
Date published: 2025-02-25
Rated 5 out of
5
by
melissac712_8604 from
Beautiful
So beautiful and high quality. This really elevated the feel of my bathroom. Highly recommend delta products, they last forever too. So good!!
Date published: 2025-01-21
Rated 5 out of
5
by
monicav75_6456 from
Elegance & Bathroom Fixture
First I would like to start with the packaging which matches with the overall product , high end and a bathroom designers dream . The installation is not for a beginner in my opinion nor would I want to try with such an investment . The handheld faucet is super nice and good for rinsing out your hair or even someone else’s . A household with a pet or small child would benefit from the convenience of the handheld faucet . If you are remodeling or building a home and need bathroom fixtures this is a dream brand !!!
Date published: 2025-01-15
Rated 5 out of
5
by
lauram1239_8991 from
Great Item
This is a beautiful faucet. Retro, minimalist and modern with an old fashion flair. Easy install and looks great in the bathroom. Great water pressure, ease of functionality and a strong and luxurious design and durability.
Date published: 2025-01-15
Q&A
Do I need a overflow/drain to match T4759-SSFL? I know depending on tub but I cant find an options for this.
Hi Matt, Thank you for your question!
None of our bath waste assemblies are included with our tub units. We do not manufacture roman tub/Jacuzzi bath waste assemblies. However, we do manufacture standard tub/shower bath waste. Below is a link to the ones we offer:
http://www.deltafaucet.com/search/results.html?q=bath+waste
Best regards,
Brandis
Date published: 2024-03-28
Not enough hot water- can i adjust
On the hottest setting the water is under 100 degrees, we are forced to fill a bucket in the shower to fill the tub. How can I adjust the flow? This unit was installed previous to our ownership. Thanks.
Hi John, Thank you for your question. The cartridge in the model 4759-FL is equipped with a rotational limit stop that allows you to set the max hot water temperature. Page 7 of the attached manual will show you how to make the adjustment to raise the water temperature.
http://www.deltafaucet.com/customersupport/documentation/t4759-fl.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Thanks,
Dave
Date published: 2024-03-28
I have an old house and the hot water flow is lessening now on my Delta T4759/R4700-FL. Is there a "grit" screen to clean on the tub filler like there is on my kitchen sink? If so, where is it, and how can this be accomplished? Thanks very much!
Thank you for your question, DDDD! I do apologize for any issue you may be having with this tub filler, but will be more than happy to help! There is a rotational limit stop on the cartridge, which may need to be readjusted seasonally. Run the water so that the cold water is as cold as it will get, and then run the hot water until is as hot as it will get. Pull the white Rotational Limit Stop outward and rotate. Clockwise rotation will decrease the outlet temperature, counterclockwise rotation will increase the outlet temperature.When finished, make sure that the Rotational Limit Stop is fully retracted into the seated position. Place the handle on the stem, and rotate the handle counterclockwise until the handle stops. I have included a link to the maintenance and installation sheet, for you to refer to. If you need further assistance, feel free to contact us directly.
https://media.deltafaucet.com/MandI/74820%20Rev%20G.pdf
Best Regards, Benjamin
Date published: 2024-03-28
Hot is Cold
We have this floor mounted faucet but when
we turn it on it comes out hot first and if we keep
turning it goes to cold. Is it possible that it is
mounted 180 degrees out? Can we just lift
It up and rotate it? It is mounted on the left
side of the tub. I heard somewhere that it should
Be mounted on the right side of the tub but
That would reduce the design possibilities.
Thank you for your inquiry, Schuffy! We would advise removing and rotating the valve cartridge assembly 180 degrees and reinstalling it. This should allow the cold water to run first, out of your Delta Contemporary Floor Mount Roman Tub T4759-FL model.
Best regards,
Tanya
Date published: 2024-03-28
Dumbest question. Have the Cassidy freestanding tub filler installed and it has one handle for on/off water flow. How do I get temp control? Handle doesn’t turn any further than “water on.”
Hi Emma,
Thank you for you question. The cartridge assembly of the Delta Contemporary Floor Mount Tub Filler T4759-FL model is equipped with a rotational limit stop that allows you to set the max hot water temperature. Page 7 of the attached manual will show you how to make the adjustment to raise the water temperature. You would push the handle away from the faucet, to turn it on, then rotate it forward or backward to adjust for hot and cold temperature.
http://www.deltafaucet.com/customersupport/documentation/t4759-fl.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Best regards,
Tanya
Date published: 2024-03-28
can the hand shower and turn on be switched?
Hello, I was wondering if the handle to turn on the tub filer and the hand shower can be swapped around, I see in the photo that the hand shower is on the left and I need it to be on the right, is this possible?
Hi Dab,
Thank you for your question. Unfortunately, the hand shower and handle cannot be switched around.
Best regards,
Jon
Date published: 2024-03-28
Are there shorter main tubes for this unit?
This is the standard 31mm tube and it is too tall for our tub, causing lots of splashing in and out of the tub.
Hi, BJ & Jean!
Thank you for your question. Unfortunately, we do not have a shorter main tube for this tub filler.
Best Regards,
Rosanna
Date published: 2017-07-20
I am purchasing the Floor mount tub filler: Trinsic T4759-BLFL with the Trinsic rough #R4700-FLWS to be installed in a raised foundation room...do I also need the mounting plate rough? RP74813 (The existing floor will be removed for new tile floor)
Hi, Cat R!
Thank you for your question. The RP74813 mounting plate will need to be installed. You can view the manual and installation instructions here:
https://media.deltafaucet.com/MandI/74821%20Rev%20D.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
The water temperature on this item does not get nearly as hot as the rest of my bathroom. I have the entire Trinsic line on both my sinks and shower, however when filling the tub the hot water is warm at best. How do I fix this?
Hi, Destined512!
Thank you for your question. The valve cartridge assembly does have a rotational limit stop that can be adjusted so that your water can become hotter. You will want to remove the set screw from the handle with a 1/8" allen wrench. Once the handle is removed you will be able to see the rotational limit stop on the front of the cartridge. To adjust the rotational limit stop:
1. Pull out the inner, off-white circle. It maybe quite stiff.
2. When pulled out far enough, the circle will turn. Left (counterclockwise=hotter, right (clockwise)=colder.
3.Release the circle once it's at the desired temperature.
4. Test the temperature, adjust the rotational limit stop as needed.
Best Regards,
Rosanna
Date published: 2024-03-28
what is the Pressure balance cartridge in this tub filler made of? Ceramic or plastic sleeve?
Trying to understand better what the pressure balance cartridge consists of in this faucet so I can better understand its potential reliability before I purchase it
Hi Natalie, Thank you for your question. The pressure balanced cartridge used in the model T4759-FL floor mount tub filler is our RP46074 cartridge. The cartridge has a plastic housing. The same cartridge is used in our 13/14 series tub/shower faucets and offers a lifetime warranty to the original purchaser.
Thanks,
Dave
Date published: 2024-03-28
Is there both flow and temperature control?
Does the faucet have both flow and temperature control. Can I have full flow and change from hot to cold. Can i have minimal flow with just hot water?
Hi Mkret, Thank you for your question. The model T4759-FL uses the same pressure balanced cartridge used in our 13/14 series single handle tub/shower faucets. This single function cartridge allows you to control temperature only, not the volume.
Thanks,
Dave
Date published: 2024-03-28
Does the main water to the house need to be off to adjust the rotational limit stop?
Hello!
Yes, you will need to turn the water off at the main shutoff valve in order to adjust the cartridge.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-12-31
I want to adjust the temperature so it allows much hotter water. The link you posted on this in the question above only goes to 1 page of the spec doc and that page doesn't address this question. Can you give further help?
Hi, Dave!
Thank you for your question. The valve cartridge assembly in the Delta T4759-FL faucet does have a rotational limit stop that can be adjusted to get hotter water. To adjust the rotational limit stop, first remove the handle with a 1/8" allen wrench. Once the handle is off, the valve cartridge assembly will be visible. Please follow the next four steps:
1. Pull out the inner, off-white circle. It maybe quite stiff.
2. When pulled out far enough, the circle will turn. Left (counterclockwise=hotter, right (clockwise)=colder.
3.Release the circle once it's at the desired temperature.
4. Test the temperature, adjust the rotational limit stop as needed.
Best Regards,
Rosanna
Date published: 2024-03-28
Hello, is there matching sink faucets for this style? thank you
Thank you for your question, gmennie! Yes, model T4759-FL is part of the Trinsic collection. I have included a link to the Trinsic bathroom collection on our website.
https://www.deltafaucet.com/bathroom/collections/trinsic-bathroom-collection
Best Regards, Benjamin
Date published: 2024-03-28
hose outlet connector size?
What is the size of the outlet where the Handshower Hose connects?
Hi, Will!
Thank you for your question. The hand shower hose connection is 1/2".
Best Regards,
Rosanna
Date published: 2017-05-19
Removing the handle to adjust the rotational limit stop
I have reviewed the manual and searched everything online. Please tell me how to remove the handle so I can get to the rotational limit stop. Instruction videos for the limit stop on the shower head shows using an allen wrench. When I look into the hole for this tub filler, it doesn't appear that it is the correct shape for an allen wrench.
Dear Tammi,
Thank you for your question. To remove the handle from your Delta Floor Mount Tub Filler T4759-FL faucet, you would need to use a 3/32" Allen wrench to remove the set screw.
https://media.deltafaucet.com/PartsDiagram/DPD-B-T4759-FL.pdf
Best regards,
Tanya
Date published: 2017-03-07
Does T4759-FL meet ASSE 1070 requirements
Hello Doug,
Thank you for your question. Yes, the Delta Trinsic Floor Mount Tub Filler T4759-FL model does meet all plumbing and water codes and regulations. Please feel free to call, email, or message us on social if there is anything else you need.
Best regards,
Tanya
Date published: 2024-03-28
What is the distance from the center of the free standing water on tub to the spout? We have purchased this, are waiting for it to arrive, but my plumber is going to rough it in.
Hello Minichsue,
Thank you for you question. The Delta Contemporary Floor Mount Tub Filler T4759-CZFL has a spout length of 8" (203 mm).
https://media.deltafaucet.com/SpecSheet/DSP-B-T4759-FL%20Rev%20E.pdf
Best regards,
Tanya
Date published: 2024-03-28
Swivel Lock
Is there a lock that would prevent the spout from swiveling?
Hi, Al!
Thank you for your question. There is not a lock on the spout that will stop the spout from swiveling.
Best Regards,
Rosanna
Date published: 2017-03-16
Only warm water comes out. How do you adjust water temp? Is there a video out there for instruction?
Thank you for your question, Vincent! This model includes a rotational limit stop that must be set to a higher temperature at the time of installation. Information on making this simple adjustment can be found on page 7 of the Maintenance and Installation manual below. Please let us know if you have questions or need further assistance.
https://media.deltafaucet.com/MandI/74820%20Rev%20G.pdf
Best regards, Edward
Date published: 2024-03-28
Does this tub filler have a scorch feature to regulate the heat of the water? This is required by code in my city.
Hi Navis,
Thank you for your question! This faucet has a pressure-balance cartridge to help prevent scalding. It also has a Rotational Limit Stop that allows you to adjust the maximum temperature. For more information regarding compliance, please see the Technical Specifications:
https://media.deltafaucet.com/SpecSheet/DSP-B-T4759-FL%20Rev%20E.pdf
Best regards, Jon
Date published: 2024-03-28
How do I mount the T4759-FL?
Does it include a mounting plate?
What type of connections (interface) do I need for the supply lines? I read the installation instructions and it doesn't specify supply to faucet connection types.
Thank you.
Hi Lori, Thank you for your question. The T4759-FL is only the trim for the faucet. You will also need to order the floor mount tub filler rough in as well. R4700-FL or R4700FLWS will work with the trim to make a complete faucet. The roughs are plumbed with 1/2" lines. I have attached the manual for the R4700-FL below.
Thanks,
Dave
http://www.deltafaucet.com/customersupport/documentation/r4700-fl.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Date published: 2024-03-28
slow flow rate in a tub filler. How do i address?
Hello,
Thank you for your question!
The water efficient hand shower for this model will only provide a flow rate of 1.75gpm. If the main spout has a low flow issue you will want to remove turn the water off at the main valve. Remove the handle, bonnet nut and cartridge. Next, turn the water back on at the valve and allow water to flush any debris that may be present contributing to a low flow issue.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-03-17
If using the optional high flow cartridge is the unit still pressure balanced?
Hi Joe The Plumber NJ, Thank you for your question. The optional high flow cartridge for the floor mount tub fillers is not pressure balanced.
Thanks,
Dave
Date published: 2024-03-28
what is the differences between the 144759-FL and the T4759-FL?
Hi Brian,
Thank you for your question. The Delta Trinsic T4759-FL is a trim kit only, you would need to purchase the rough-in valve separately. The Trinsic Floor Mount Roman Tub 144759-FL faucet is a complete unit includes trim and rough-in valve.
Best regards,
Tanya
Date published: 2024-03-28
How do you increase the water flow?
Hi Anonymous,
Thank you for your question. The T4759-FL floor mount tub filler has a flow rate of 6.0 gallons per minute at 60 PSI. The hand shower is 2.0 gpm. There is no way of increasing or decreasing these flow rates.
Best regards,
Tanya
Date published: 2024-03-28
Does this faucet include scald guard?
Hi Cameron,
Thank you for your question. The T4759-FL does have scald guard and a rotational limit stop with the cartridge that limits how hot the water can get. However if you upgrade to the RP73598 cartridge that gives a higher flow rate you will not have either protection. This high flow cartridge is not recommended to be used in a shower application.
Thanks,
Dave
Date published: 2024-03-28
Which rough-in valve is suggested for installation on/in concrete slabs? Neither installation manual shows a slab type installation.
Can this valve be installed in or under the concrete slab
Date published: 2024-03-28
What is the difference between the 144759-FL tub filler and the T4759-FL tub filler? Do I need to know which model I have in case I need to order a part in the future?
Hi, MTra!
Thank you for you question. The Delta T4759-FL and 144759-FL Tub Fillers are exactly the same. The only difference is that the Delta 144759-FL Tub Filler includes both the trim and rough-in. The R4700-FL Rough-In is sold separately for the T4759-FL.
Best Regards,
Rosanna
Date published: 2024-03-28
ASME - A112.18.1 or CSA - B125.1 certification?
Is this faucet ASME and/or CSA certified?
HI KBR, Thank you for your question. The model T4759-SSFL does comply with ASME A112.18.1 / CSA B125.1.
Here is the link to the spec sheet regarding this information.
http://www.deltafaucet.com/customersupport/documentation/t4759-ssfl.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Thanks,
Dave
Date published: 2024-03-28
PART LIST
PART LIST
View Product
![Image-RP22734]()
Delta®
Delta® Bonnet
List Price:
$17.70
Online Price:
$14.16
Free Ground Shipping All Orders $49+
RP22734
4.45
11
View Product
![Image-RP74819]()
Trinsic®
Trinsic® Nuts & Washers - Mounting
List Price:
$14.85
Online Price:
$11.88
Free Ground Shipping All Orders $49+
RP74819
View Product
![Image-RP73375RB]()
![Secondary Image-RP73375RB]()
Trinsic®
Trinsic® Metal Lever Handle Kit - 14 Series
List Price:
$129.05
Online Price:
$103.24
Free Ground Shipping All Orders $49+
RP73375RB
View Product
![Image-RP72679RB]()
Cassidy®
Cassidy® Spout Assembly - Kitchen
List Price:
$238.00
Online Price:
$190.40
Free Ground Shipping All Orders $49+
RP72679RB
View Product
![Image-RP23336]()
Delta®
Delta® O-Ring - Large - All Monitor® Series
List Price:
$7.70
Online Price:
$6.16
Free Ground Shipping All Orders $49+
RP23336
5.00
5
View Product
![Image-RP29569]()
Delta®
Delta® Spacer
List Price:
$4.90
Online Price:
$3.92
Free Ground Shipping All Orders $49+
RP29569
5.00
1
View Product
![Image-RP25620]()
Delta®
Delta® Set Screw
List Price:
$6.45
Online Price:
$5.16
Free Ground Shipping All Orders $49+
RP25620
4.21
14
View Product
![Image-RP4993]()
Delta®
Delta® Seats & Springs (2 ea)
List Price:
$10.10
Online Price:
$8.08
Free Ground Shipping All Orders $49+
RP4993
4.70
100
View Product
![Image-RP51287]()
Lahara®
Lahara® Stream Straightener Kit - Roman Tub
List Price:
$24.10
Online Price:
$19.28
Free Ground Shipping All Orders $49+
RP51287
5.00
1
View Product
![Image-RP46074]()
![Secondary Image-RP46074]()
Delta®
Delta® Cartridge Assembly - MultiChoice® Universal - 13 / 14 Series
List Price:
$118.35
Online Price:
$94.68
Free Ground Shipping All Orders $49+
RP46074
2.21
107
View Product
![Image-RP73598]()
Classic
Classic Cartridge - Non-Pressure Balance - 1300 Series
List Price:
$45.95
Online Price:
$36.76
Free Ground Shipping All Orders $49+
RP73598
View Product
![Image-RP14414]()
Delta®
Delta® O-Rings (2) - 13 / 14 Series
List Price:
$4.60
Online Price:
$3.68
Free Ground Shipping All Orders $49+
RP14414
5.00
2
View Product
![Image-RP74810]()
Trinsic®
Trinsic® Diverter Assembly - Floor Mount Tub Filler
List Price:
$44.15
Online Price:
$35.32
Free Ground Shipping All Orders $49+
RP74810
5.00
1
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.